-- -- Boundary Scan Description Language (BSDL) File -- Generated by Daphne version: 2013.11.12 at: Fri Jan 10 17:07:37 2014 -- -- Device: K02F 100 MHz Mask Set xN36M -- Package Type: K02F_32QFN -- Version: 1.0 -- Date:         08/24/2015 -- -- This BSDL has been validated for syntax and semantics compliance to -- IEEE 1149.1 using the JTAG Technologies CHKBSDL version 1.0.2.4. -- -- -- THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESSED OR -- IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -- OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -- IN NO EVENT SHALL FREESCALE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, -- INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING -- IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF -- THE POSSIBILITY OF SUCH DAMAGE. -- entity K02F is generic (PHYSICAL_PIN_MAP : string := "K02F_32QFN"); -- PORT DESCRIPTION TERMS -- in = input only -- out = three-state output (0, Z, 1) -- buffer = two-state output (0, 1) -- inout = bidirectional -- linkage = OTHER (vdd, vss, analog) -- -- bit = single pin -- bit_vector = group of pins with suffix 0 to n port ( PTA0: in bit; PTA1: in bit; PTA18: inout bit; PTA19: inout bit; PTA2: out bit; PTA3: in bit; PTA4: inout bit; PTB0: inout bit; PTB1: inout bit; PTC1: inout bit; PTC2: inout bit; PTC3: inout bit; PTC4: inout bit; PTC5: inout bit; PTC6: inout bit; PTC7: inout bit; PTD4: inout bit; PTD5: inout bit; PTD6: inout bit; PTD7: inout bit; PTE16: inout bit; PTE17: inout bit; PTE18: inout bit; PTE19: inout bit; PTE24: inout bit; PTE25: inout bit; RESETB: inout bit; DAC0OUT_CMP1IN3_ADC0SE23: linkage bit; VDD: linkage bit; VDDA_VREFH: linkage bit; VREFL_VSSA: linkage bit; VSS: linkage bit); use STD_1149_1_2001.all; attribute COMPONENT_CONFORMANCE of K02F: entity is "STD_1149_1_2001"; attribute PIN_MAP of K02F: entity is PHYSICAL_PIN_MAP; constant K02F_32QFN :PIN_MAP_STRING := "PTA0: 12," & "PTA1: 13," & "PTA18: 17," & "PTA19: 18," & "PTA2: 14," & "PTA3: 15," & "PTA4: 16," & "PTB0: 20," & "PTB1: 21," & "PTC1: 22," & "PTC2: 23," & "PTC3: 24," & "PTC4: 25," & "PTC5: 26," & "PTC6: 27," & "PTC7: 28," & "PTD4: 29," & "PTD5: 30," & "PTD6: 31," & "PTD7: 32," & "PTE16: 3," & "PTE17: 4," & "PTE18: 5," & "PTE19: 6," & "PTE24: 10," & "PTE25: 11," & "RESETB: 19," & "DAC0OUT_CMP1IN3_ADC0SE23: 9," & "VDD: 1," & "VDDA_VREFH: 7," & "VREFL_VSSA: 8," & "VSS: 2" ; attribute TAP_SCAN_OUT of PTA2 : signal is true; attribute TAP_SCAN_CLOCK of PTA0 : signal is (2.00e+07,BOTH); attribute TAP_SCAN_MODE of PTA3 : signal is true; attribute TAP_SCAN_IN of PTA1 : signal is true; attribute INSTRUCTION_LENGTH of K02F: entity is 4; attribute INSTRUCTION_OPCODE of K02F: entity is "BYPASS (1111)," & "CLAMP (1100)," & "EXTEST (0100)," & "HIGHZ (1001)," & "SOC_IDCODE (0000)," & "PRELOAD (0010)," & "SAMPLE (0011)," & "ENABLE_CENSOR_CTRL (0111)," & "ENABLE_TEST_CTRL (0110)," & "EZPORT (1101)," & "JTAGDP_ABORT (1000)," & "JTAGDP_APACC (1011)," & "JTAGDP_DPACC (1010)," & "IDCODE (1110)"; attribute INSTRUCTION_CAPTURE of K02F: entity is "xx01"; attribute INSTRUCTION_PRIVATE of K02F: entity is "ENABLE_CENSOR_CTRL," & "ENABLE_TEST_CTRL," & "EZPORT," & "JTAGDP_ABORT," & "JTAGDP_APACC," & "JTAGDP_DPACC," & "SOC_IDCODE"; -- By default the ARM JTAG controller's IDCODE is selected. The -- information below describes the IDCODE for the ARM JTAG -- that is returned if you execute the IDCODE instruction -- (IR = 1110). -- attribute IDCODE_REGISTER of K02F: entity is "0100" & -- Version (Cortex M4) "1011101000000000" & -- Part Number (ARM Cortex M) "01000111011" & -- Manufacturer Identity (ARM) "1"; -- IEEE 1149.1 Requirement -- The information below describes the SOC_IDCODE value -- that is returned if you execute the SOC_IDCODE instruction -- (IR = 0000). -- -- attribute IDCODE_REGISTER of K02F: entity is -- "0000" & -- Version -- "1011001011110010" & -- Part Number -- "00000001110" & -- Manufacturer Identity -- "1"; -- IEEE 1149.1 Requirement attribute REGISTER_ACCESS of K02F: entity is "BYPASS (BYPASS)," & "DEVICE_ID (IDCODE)"; attribute BOUNDARY_LENGTH of K02F: entity is 84; attribute BOUNDARY_REGISTER of K02F: entity is -- BSR DESCRIPTION TERMS -- cell type = BC_0 - BC_99 -- port = port name -- function -- input = input only -- bidir = bidirectional -- output2 = two state ouput -- output3 = three state ouput -- control = control cell -- controlr = control cell -- internal = placeholder cell -- safe = value that turns off drivers in control cells -- ccell = controlling cell number for I/O direction -- dsval = disabling (input) value -- rslt = result if disabled (input = Z) -- -- num cell port/* function safe [ccell dis rslt] " 0 (BC_1, *, internal, X) ," & " 1 (BC_1, *, internal, X) ," & " 2 (BC_1, *, internal, X) ," & " 3 (BC_1, *, internal, X) ," & " 4 (BC_2, *, control, 1) ," & " 5 (BC_8, PTE16, bidir, X, 4, 1, Z) ," & " 6 (BC_2, *, control, 1) ," & " 7 (BC_8, PTE17, bidir, X, 6, 1, Z) ," & " 8 (BC_2, *, control, 1) ," & " 9 (BC_8, PTE18, bidir, X, 8, 1, Z) ," & " 10 (BC_2, *, control, 1) ," & " 11 (BC_8, PTE19, bidir, X, 10, 1, Z) ," & " 12 (BC_2, *, control, 1) ," & " 13 (BC_8, PTE24, bidir, X, 12, 1, Z) ," & " 14 (BC_2, *, control, 1) ," & " 15 (BC_8, PTE25, bidir, X, 14, 1, Z) ," & " 16 (BC_2, *, control, 1) ," & " 17 (BC_8, PTA4, bidir, X, 16, 1, Z) ," & " 18 (BC_1, *, internal, X) ," & " 19 (BC_1, *, internal, X) ," & " 20 (BC_1, *, internal, X) ," & " 21 (BC_1, *, internal, X) ," & " 22 (BC_2, *, control, 1) ," & " 23 (BC_8, PTA18, bidir, X, 22, 1, Z) ," & " 24 (BC_2, *, control, 1) ," & " 25 (BC_8, PTA19, bidir, X, 24, 1, Z) ," & " 26 (BC_2, *, control, 1) ," & " 27 (BC_8, RESETB, bidir, X, 26, 1, Z) ," & " 28 (BC_2, *, control, 1) ," & " 29 (BC_8, PTB0, bidir, X, 28, 1, Z) ," & " 30 (BC_2, *, control, 1) ," & " 31 (BC_8, PTB1, bidir, X, 30, 1, Z) ," & " 32 (BC_1, *, internal, X) ," & " 33 (BC_1, *, internal, X) ," & " 34 (BC_1, *, internal, X) ," & " 35 (BC_1, *, internal, X) ," & " 36 (BC_1, *, internal, X) ," & " 37 (BC_1, *, internal, X) ," & " 38 (BC_1, *, internal, X) ," & " 39 (BC_1, *, internal, X) ," & " 40 (BC_1, *, internal, X) ," & " 41 (BC_1, *, internal, X) ," & " 42 (BC_1, *, internal, X) ," & " 43 (BC_1, *, internal, X) ," & " 44 (BC_1, *, internal, X) ," & " 45 (BC_1, *, internal, X) ," & " 46 (BC_2, *, control, 1) ," & " 47 (BC_8, PTC1, bidir, X, 46, 1, Z) ," & " 48 (BC_2, *, control, 1) ," & " 49 (BC_8, PTC2, bidir, X, 48, 1, Z) ," & " 50 (BC_2, *, control, 1) ," & " 51 (BC_8, PTC3, bidir, X, 50, 1, Z) ," & " 52 (BC_2, *, control, 1) ," & " 53 (BC_8, PTC4, bidir, X, 52, 1, Z) ," & " 54 (BC_2, *, control, 1) ," & " 55 (BC_8, PTC5, bidir, X, 54, 1, Z) ," & " 56 (BC_2, *, control, 1) ," & " 57 (BC_8, PTC6, bidir, X, 56, 1, Z) ," & " 58 (BC_2, *, control, 1) ," & " 59 (BC_8, PTC7, bidir, X, 58, 1, Z) ," & " 60 (BC_1, *, internal, X) ," & " 61 (BC_1, *, internal, X) ," & " 62 (BC_1, *, internal, X) ," & " 63 (BC_1, *, internal, X) ," & " 64 (BC_1, *, internal, X) ," & " 65 (BC_1, *, internal, X) ," & " 66 (BC_1, *, internal, X) ," & " 67 (BC_1, *, internal, X) ," & " 68 (BC_1, *, internal, X) ," & " 69 (BC_1, *, internal, X) ," & " 70 (BC_1, *, internal, X) ," & " 71 (BC_1, *, internal, X) ," & " 72 (BC_1, *, internal, X) ," & " 73 (BC_1, *, internal, X) ," & " 74 (BC_1, *, internal, X) ," & " 75 (BC_1, *, internal, X) ," & " 76 (BC_2, *, control, 1) ," & " 77 (BC_8, PTD4, bidir, X, 76, 1, Z) ," & " 78 (BC_2, *, control, 1) ," & " 79 (BC_8, PTD5, bidir, X, 78, 1, Z) ," & " 80 (BC_2, *, control, 1) ," & " 81 (BC_8, PTD6, bidir, X, 80, 1, Z) ," & " 82 (BC_2, *, control, 1) ," & " 83 (BC_8, PTD7, bidir, X, 82, 1, Z) "; end K02F;