-- ======================================================================= -- Boundary Scan Description Language (BSDL) File -- -- Product: PCI9030 (PLX Technology, Inc.) -- Package: PQFP-176 -- -- ======================================================================= -- **************************************************************** -- This BSDL has been validated for syntax and semantics compliance -- to IEEE 1149.1. It also passed all hardware validation tests, -- using the ASSET InterTech, Inc./Ensure DFT Services' -- BSDL Validation process. -- -- Ensure DFT Services -- A Division of ASSET InterTech, Inc. -- Ph: 603-886-6060 -- **************************************************************** -- ======================================================================= -- -- IMPORTANT NOTE: -- There are two compliance enables for this device. The test engineer -- must ensure these signals are set according to the compliance patterns, -- prior to accessing this device for Boundary Scan testing. -- Signals are BD_SEL_N_TEST, RST_N = 01 -- ========================================================= -- Revision Control: -- -- Version Date Reason for Change -- ******* ******** ***************** -- 1.0 08/09/00 Initial Version -- Randy West, ASSET InterTech, Inc. -- 2.0 09/26/00 Pin 53 (LEDon_N) was found to always stay -- high. Re-generated this version with this -- pin as an internal cell. -- JKadaras, Ensure DFT Services -- 3.0 01/30/01 Device specification problems with pins 52 and 53 -- being swapped in the original spec. This is probably -- what caused pin 53 to fail. Changed LEDon_N back to -- an output and swapped pin numbers to reflect -- the new device specification documents. This update -- has not been hardware validated, but should work. -- LEDon_N is now pin 52. -- JKadaras, Ensure DFT Services -- 4.0 01/03/02 Changed Sample instruction to 0100 from xx01. -- Passes all hardware validation tests & sample tests. -- JKadaras, Ensure DFT Services -- -- ====================================================================== entity PCI9030_PQF_r4 is generic ( PHYSICAL_PIN_MAP : string := "PQFP_176" ) ; port ( -- Signal Name | Type and Dimension | Description -- Power and Ground Pins VDD : linkage bit_vector ( 1 to 11 ); -- Power (+3.3V) VI_O : linkage bit; -- Voltage Input/Output VSS : linkage bit_vector ( 1 to 14 ); -- Ground --Serial EEPROM Interface Pins EECS : buffer bit; -- Serial EEPROM Chip Select EEDI : buffer bit; -- Serial EEPROM Data In EEDO : in bit; -- Serial EEPROM Data Out EESK : buffer bit; -- Serial Data Clock -- Test and Debug Pins TCK : in bit; -- Test Clock TDI : in bit; -- Test Data In TDO : out bit; -- Test Data Out BD_SEL_N_TEST : in bit; -- Board Select/Test TMS : in bit; -- Test Mode Select TRST_N : in bit; -- Test Reset -- PCI System Bus Interface Pins AD : inout bit_vector ( 31 downto 0 ); -- Address and Data C_BE_N : in bit_vector ( 3 downto 0 ); -- Bus Command and Byte Enables DEVSEL_N : out bit; -- Device Select ENUM_N : out bit; -- Enumeration FRAME_N : in bit; -- Cycle Frame IDSEL : in bit; -- Initialization Device Select INTA_N : out bit; -- Interrupt A IRDY_N : in bit; -- Initiator Ready LOCK_N : in bit; -- Lock PAR : inout bit; -- Parity PCLK : in bit; -- Clock PERR_N : out bit; -- Parity Error PME_N : out bit; -- Power Management Event RST_N : in bit; -- Reset SERR_N : out bit; -- System Error STOP_N : out bit; -- Stop TRDY_N : out bit; -- Target Ready -- Local Bus Mode-Independent Interface Pins BCLKo : buffer bit; -- BCLK Out CPCISW : in bit; -- CompactPCI Switch CS0_N : out bit; -- Chip Select 0 CS1_N : out bit; -- Chip Select 1 GPIO0_WAITo_N : inout bit; -- General Purpose I/O 0 or WAIT Out GPIO1_LLOCKo_N : inout bit; -- General Purpose I/O 1 or LLOCK Out GPIO2_CS2_N : inout bit; -- General Purpose I/O 2 or Chip Select 2 Out GPIO3_CS3_N : inout bit; -- General Purpose I/O 3 or Chip Select 3 Out GPIO8 : inout bit; -- General Purpose I/O 8 LCLK : in bit; -- Local Bus Clock -- LEDon_N to linkage bit 9/26/00, r2, JK -- LEDon_N to out bit 1/30/01, r3, JK LEDon_N : out bit; -- LED On LGNT : buffer bit; -- Local Bus Grant LINTi1 : in bit; -- Local Interrupt Input 1 LINTi2 : in bit; -- Local Interrupt Input 2 LPMESET : in bit; -- Local Power Management Event Set LPMINT_N : buffer bit; -- Local Power Management Interrupt LREQ : in bit; -- Local Bus Request LRESETo_N : buffer bit; -- Local Bus Reset Out MODE : in bit; -- Bus Mode -- Local Bus Mode-Dependent (Multiplexed/ Non-multiplexed) Interface Pins ADS_N : out bit; -- Address Strobe ALE : out bit; -- Address Enable Latch BLAST_N : out bit; -- Burst Last BTERM_N : in bit; -- Burst Terminate GPIO4_LA27 : inout bit; -- General Purpose I/O 4 or Address Bus GPIO5_LA26 : inout bit; -- General Purpose I/O 5 or Address Bus GPIO6_LA25 : inout bit; -- General Purpose I/O 6 or Address Bus GPIO7_LA24 : inout bit; -- General Purpose I/O 7 or Address Bus LA : out bit_vector ( 23 downto 2 ); -- Address Bus LAD : inout bit_vector ( 31 downto 0 ); -- Address/Data Bus LBE_N : out bit_vector ( 3 downto 0 ); -- Byte Enables LW_R_N : out bit; -- Write/Read RD_N : out bit; -- Read Strobe READY_N : in bit; -- Local Ready Input WR_N : out bit -- Write Strobe ) ; use STD_1149_1_1994.all ; attribute COMPONENT_CONFORMANCE OF PCI9030_PQF_r4 : entity is "STD_1149_1_1993" ; attribute PIN_MAP of PCI9030_PQF_r4 : entity is PHYSICAL_PIN_MAP ; constant PQFP_176 : PIN_MAP_STRING := -- Signal Name | Pin Numbers -- Power and Ground Pins " VDD : ( 1, 14, 32, 45, 56, 70, 85, 100, 117, 133, 162 )," & " VI_O : 53 ," & " VSS : ( 13, 31, 44, 57, 66, 78, 88, 101, 113, 122, 132 ," & " 146, 163, 176 )," & --Serial EEPROM Interface Pins " EECS : 158 ," & " EEDI : 161 ," & " EEDO : 159 ," & " EESK : 160 ," & -- Test and Debug Pins " TCK : 165 ," & " TDI : 168 ," & " TDO : 167 ," & " BD_SEL_N_TEST : 112 ," & " TMS : 166 ," & " TRST_N : 164 ," & -- PCI System Bus Interface Pins " AD : ( 173, 174, 175 , 2, 3, 4, 5, 6, 9, 10, 11, 12 ," & " 15, 16, 17, 18, 30, 33, 34, 35, 36, 37, 38, 39 ," & " 41, 42, 43, 46, 47, 48, 49, 50 )," & " C_BE_N : ( 7, 19, 29, 40 )," & " DEVSEL_N : 23 ," & " ENUM_N : 51 ," & " FRAME_N : 20 ," & " IDSEL : 8 ," & " INTA_N : 170 ," & " IRDY_N : 21 ," & " LOCK_N : 25 ," & " PAR : 28 ," & " PCLK : 172 ," & " PERR_N : 26 ," & " PME_N : 169 ," & " RST_N : 171 ," & " SERR_N : 27 ," & " STOP_N : 24 ," & " TRDY_N : 22 ," & -- Local Bus Mode-Independent Interface Pins " BCLKo : 71 ," & " CPCISW : 54 ," & " CS0_N : 147 ," & " CS1_N : 148 ," & " GPIO0_WAITo_N : 154 ," & " GPIO1_LLOCKo_N : 155 ," & " GPIO2_CS2_N : 156 ," & " GPIO3_CS3_N : 157 ," & " GPIO8 : 94 ," & " LCLK : 145 ," & " LEDon_N : 52 ," & " LGNT : 150 ," & " LINTi1 : 152 ," & " LINTi2 : 153 ," & " LPMESET : 103 ," & " LPMINT_N : 126 ," & " LREQ : 151 ," & " LRESETo_N : 149 ," & " MODE : 76 ," & -- Local Bus Mode-Dependent (Multiplexed/ Non-multiplexed) Interface Pins " ADS_N : 138 ," & " ALE : 75 ," & " BLAST_N : 139 ," & " BTERM_N : 144 ," & " GPIO4_LA27 : 137 ," & " GPIO5_LA26 : 136 ," & " GPIO6_LA25 : 135 ," & " GPIO7_LA24 : 134 ," & " LA : ( 131, 130, 129, 128, 127, 125, 124, 123 ," & " 121, 120, 119, 118, 116, 115, 114 ," & " 111, 110, 109, 108, 107, 106, 105 )," & " LAD : ( 61, 62, 63, 64, 65, 67, 68, 69, 72, 73, 74, 77, 79 ," & " 80, 81, 82, 83, 84, 86, 87, 89, 90, 91, 92, 93, 95 ," & " 96, 97, 98, 99, 102, 104 )," & " LBE_N : ( 55, 58, 59, 60 )," & " LW_R_N : 142 ," & " RD_N : 141 ," & " READY_N : 143 ," & " WR_N : 140 " ; attribute TAP_SCAN_IN of TDI : signal is true ; attribute TAP_SCAN_OUT of TDO : signal is true ; attribute TAP_SCAN_MODE of TMS : signal is true ; attribute TAP_SCAN_RESET of TRST_N : signal is true ; attribute TAP_SCAN_CLOCK of TCK : signal is ( 1.0e6, BOTH ) ; attribute COMPLIANCE_PATTERNS OF PCI9030_PQF_r4 : entity is "(BD_SEL_N_TEST, RST_N) (01)" ; attribute INSTRUCTION_LENGTH of PCI9030_PQF_r4 : entity is 4 ; attribute INSTRUCTION_OPCODE of PCI9030_PQF_r4 : entity is "BYPASS (1111)," & "EXTEST (0000)," & "SAMPLE (0100)," & "JTAG_PRIVATE (001X)," & "JTAG_PRIVATE (0001)," & "JTAG_PRIVATE (10XX)," & "JTAG_PRIVATE (110X)," & "JTAG_PRIVATE (1110)" ; attribute INSTRUCTION_CAPTURE of PCI9030_PQF_r4 : entity is "xx01" ; attribute INSTRUCTION_PRIVATE of PCI9030_PQF_r4 : entity is "JTAG_PRIVATE" ; attribute REGISTER_ACCESS of PCI9030_PQF_r4 : entity is "BOUNDARY ( EXTEST, SAMPLE )," & "BYPASS ( BYPASS )" ; attribute BOUNDARY_LENGTH of PCI9030_PQF_r4 : entity is 236 ; attribute BOUNDARY_REGISTER of PCI9030_PQF_r4 : entity is -- num | cell | port | function | safe [ccell | disval | rslt] -- ________________________________________________________________________ "235 ( BC_1, PME_N, OUTPUT2, 1, 235, 1, WEAK1 )," & "234 ( BC_1, INTA_N, OUTPUT2, 1, 234, 1, WEAK1 )," & "233 ( BC_4, *, INTERNAL, X )," & "232 ( BC_4, PCLK, INPUT, X )," & "231 ( BC_4, AD(31), INPUT, X )," & "230 ( BC_1, AD(31), OUTPUT3, X, 182, 1, Z )," & "229 ( BC_4, AD(30), INPUT, X )," & "228 ( BC_1, AD(30), OUTPUT3, X, 182, 1, Z )," & "227 ( BC_4, AD(29), INPUT, X )," & "226 ( BC_1, AD(29), OUTPUT3, X, 182, 1, Z )," & "225 ( BC_4, AD(28), INPUT, X )," & "224 ( BC_1, AD(28), OUTPUT3, X, 182, 1, Z )," & "223 ( BC_4, AD(27), INPUT, X )," & "222 ( BC_1, AD(27), OUTPUT3, X, 182, 1, Z )," & "221 ( BC_4, AD(26), INPUT, X )," & "220 ( BC_1, AD(26), OUTPUT3, X, 182, 1, Z )," & "219 ( BC_4, AD(25), INPUT, X )," & "218 ( BC_1, AD(25), OUTPUT3, X, 182, 1, Z )," & "217 ( BC_4, AD(24), INPUT, X )," & "216 ( BC_1, AD(24), OUTPUT3, X, 182, 1, Z )," & "215 ( BC_4, C_BE_N(3), INPUT, X )," & "214 ( BC_4, IDSEL, INPUT, X )," & "213 ( BC_4, AD(23), INPUT, X )," & "212 ( BC_1, AD(23), OUTPUT3, X, 182, 1, Z )," & "211 ( BC_4, AD(22), INPUT, X )," & "210 ( BC_1, AD(22), OUTPUT3, X, 182, 1, Z )," & "209 ( BC_4, AD(21), INPUT, X )," & "208 ( BC_1, AD(21), OUTPUT3, X, 182, 1, Z )," & "207 ( BC_4, AD(20), INPUT, X )," & "206 ( BC_1, AD(20), OUTPUT3, X, 182, 1, Z )," & "205 ( BC_4, AD(19), INPUT, X )," & "204 ( BC_1, AD(19), OUTPUT3, X, 182, 1, Z )," & "203 ( BC_4, AD(18), INPUT, X )," & "202 ( BC_1, AD(18), OUTPUT3, X, 182, 1, Z )," & "201 ( BC_4, AD(17), INPUT, X )," & "200 ( BC_1, AD(17), OUTPUT3, X, 182, 1, Z )," & "199 ( BC_4, AD(16), INPUT, X )," & "198 ( BC_1, AD(16), OUTPUT3, X, 182, 1, Z )," & "197 ( BC_4, C_BE_N(2), INPUT, X )," & "196 ( BC_1, *, CONTROL, 1 )," & "195 ( BC_4, FRAME_N, INPUT, X )," & "194 ( BC_4, IRDY_N, INPUT, X )," & "193 ( BC_1, TRDY_N, OUTPUT3, X, 196, 1, Z )," & "192 ( BC_1, DEVSEL_N, OUTPUT3, X, 196, 1, Z )," & "191 ( BC_1, STOP_N, OUTPUT3, X, 196, 1, Z )," & "190 ( BC_4, LOCK_N, INPUT, X )," & "189 ( BC_1, PERR_N, OUTPUT3, X, 188, 1, Z )," & "188 ( BC_1, *, CONTROL, 1 )," & "187 ( BC_1, SERR_N, OUTPUT2, 1, 187, 1, WEAK1 )," & "186 ( BC_4, PAR, INPUT, X )," & "185 ( BC_1, PAR, OUTPUT3, X, 184, 1, Z )," & "184 ( BC_1, *, CONTROL, 1 )," & "183 ( BC_4, C_BE_N(1), INPUT, X )," & "182 ( BC_1, *, CONTROL, 1 )," & "181 ( BC_4, AD(15), INPUT, X )," & "180 ( BC_1, AD(15), OUTPUT3, X, 182, 1, Z )," & "179 ( BC_4, AD(14), INPUT, X )," & "178 ( BC_1, AD(14), OUTPUT3, X, 182, 1, Z )," & "177 ( BC_4, AD(13), INPUT, X )," & "176 ( BC_1, AD(13), OUTPUT3, X, 182, 1, Z )," & "175 ( BC_4, AD(12), INPUT, X )," & "174 ( BC_1, AD(12), OUTPUT3, X, 182, 1, Z )," & "173 ( BC_4, AD(11), INPUT, X )," & "172 ( BC_1, AD(11), OUTPUT3, X, 182, 1, Z )," & "171 ( BC_4, AD(10), INPUT, X )," & "170 ( BC_1, AD(10), OUTPUT3, X, 182, 1, Z )," & "169 ( BC_4, AD(9), INPUT, X )," & "168 ( BC_1, AD(9), OUTPUT3, X, 182, 1, Z )," & "167 ( BC_4, AD(8), INPUT, X )," & "166 ( BC_1, AD(8), OUTPUT3, X, 182, 1, Z )," & "165 ( BC_4, C_BE_N(0), INPUT, X )," & "164 ( BC_4, AD(7), INPUT, X )," & "163 ( BC_1, AD(7), OUTPUT3, X, 182, 1, Z )," & "162 ( BC_4, AD(6), INPUT, X )," & "161 ( BC_1, AD(6), OUTPUT3, X, 182, 1, Z )," & "160 ( BC_4, AD(5), INPUT, X )," & "159 ( BC_1, AD(5), OUTPUT3, X, 182, 1, Z )," & "158 ( BC_4, AD(4), INPUT, X )," & "157 ( BC_1, AD(4), OUTPUT3, X, 182, 1, Z )," & "156 ( BC_4, AD(3), INPUT, X )," & "155 ( BC_1, AD(3), OUTPUT3, X, 182, 1, Z )," & "154 ( BC_4, AD(2), INPUT, X )," & "153 ( BC_1, AD(2), OUTPUT3, X, 182, 1, Z )," & "152 ( BC_4, AD(1), INPUT, X )," & "151 ( BC_1, AD(1), OUTPUT3, X, 182, 1, Z )," & "150 ( BC_4, AD(0), INPUT, X )," & "149 ( BC_1, AD(0), OUTPUT3, X, 182, 1, Z )," & "148 ( BC_1, ENUM_N, OUTPUT2, 1, 148, 1, WEAK1 )," & -- "147 ( BC_1, *, INTERNAL, 1 )," & -- LEDon_N to linkage bit 9/26/00, r2, JK -- LEDon_N to OC out bit 1/30/01, r3, JK "147 ( BC_1, LEDon_N, OUTPUT2, 1, 147, 1, WEAK1 )," & "146 ( BC_4, CPCISW, INPUT, X )," & "145 ( BC_1, LBE_N(3), OUTPUT3, X, 32, 1, Z )," & "144 ( BC_1, LBE_N(2), OUTPUT3, X, 32, 1, Z )," & "143 ( BC_1, LBE_N(1), OUTPUT3, X, 32, 1, Z )," & "142 ( BC_1, LBE_N(0), OUTPUT3, X, 32, 1, Z )," & "141 ( BC_4, LAD(31), INPUT, X )," & "140 ( BC_1, LAD(31), OUTPUT3, X, 106, 1, Z )," & "139 ( BC_4, LAD(30), INPUT, X )," & "138 ( BC_1, LAD(30), OUTPUT3, X, 106, 1, Z )," & "137 ( BC_4, LAD(29), INPUT, X )," & "136 ( BC_1, LAD(29), OUTPUT3, X, 106, 1, Z )," & "135 ( BC_4, LAD(28), INPUT, X )," & "134 ( BC_1, LAD(28), OUTPUT3, X, 106, 1, Z )," & "133 ( BC_4, LAD(27), INPUT, X )," & "132 ( BC_1, LAD(27), OUTPUT3, X, 106, 1, Z )," & "131 ( BC_4, LAD(26), INPUT, X )," & "130 ( BC_1, LAD(26), OUTPUT3, X, 106, 1, Z )," & "129 ( BC_4, LAD(25), INPUT, X )," & "128 ( BC_1, LAD(25), OUTPUT3, X, 106, 1, Z )," & "127 ( BC_4, LAD(24), INPUT, X )," & "126 ( BC_1, LAD(24), OUTPUT3, X, 106, 1, Z )," & "125 ( BC_1, BCLKo, OUTPUT2, X )," & "124 ( BC_4, LAD(23), INPUT, X )," & "123 ( BC_1, LAD(23), OUTPUT3, X, 106, 1, Z )," & "122 ( BC_4, LAD(22), INPUT, X )," & "121 ( BC_1, LAD(22), OUTPUT3, X, 106, 1, Z )," & "120 ( BC_4, LAD(21), INPUT, X )," & "119 ( BC_1, LAD(21), OUTPUT3, X, 106, 1, Z )," & "118 ( BC_1, ALE, OUTPUT3, X, 32, 1, Z )," & "117 ( BC_4, MODE, INPUT, X )," & "116 ( BC_4, LAD(20), INPUT, X )," & "115 ( BC_1, LAD(20), OUTPUT3, X, 106, 1, Z )," & "114 ( BC_4, LAD(19), INPUT, X )," & "113 ( BC_1, LAD(19), OUTPUT3, X, 106, 1, Z )," & "112 ( BC_4, LAD(18), INPUT, X )," & "111 ( BC_1, LAD(18), OUTPUT3, X, 106, 1, Z )," & "110 ( BC_4, LAD(17), INPUT, X )," & "109 ( BC_1, LAD(17), OUTPUT3, X, 106, 1, Z )," & "108 ( BC_4, LAD(16), INPUT, X )," & "107 ( BC_1, LAD(16), OUTPUT3, X, 106, 1, Z )," & "106 ( BC_1, *, CONTROL, 1 )," & "105 ( BC_4, LAD(15), INPUT, X )," & "104 ( BC_1, LAD(15), OUTPUT3, X, 106, 1, Z )," & "103 ( BC_4, LAD(14), INPUT, X )," & "102 ( BC_1, LAD(14), OUTPUT3, X, 106, 1, Z )," & "101 ( BC_4, LAD(13), INPUT, X )," & "100 ( BC_1, LAD(13), OUTPUT3, X, 106, 1, Z )," & "99 ( BC_4, LAD(12), INPUT, X )," & "98 ( BC_1, LAD(12), OUTPUT3, X, 106, 1, Z )," & "97 ( BC_4, LAD(11), INPUT, X )," & "96 ( BC_1, LAD(11), OUTPUT3, X, 106, 1, Z )," & "95 ( BC_4, LAD(10), INPUT, X )," & "94 ( BC_1, LAD(10), OUTPUT3, X, 106, 1, Z )," & "93 ( BC_4, LAD(9), INPUT, X )," & "92 ( BC_1, LAD(9), OUTPUT3, X, 106, 1, Z )," & "91 ( BC_4, LAD(8), INPUT, X )," & "90 ( BC_1, LAD(8), OUTPUT3, X, 106, 1, Z )," & "89 ( BC_4, LAD(7), INPUT, X )," & "88 ( BC_1, LAD(7), OUTPUT3, X, 106, 1, Z )," & "87 ( BC_4, GPIO8, INPUT, X )," & "86 ( BC_1, GPIO8, OUTPUT3, X, 85, 1, Z )," & "85 ( BC_1, *, CONTROL, 1 )," & "84 ( BC_4, LAD(6), INPUT, X )," & "83 ( BC_1, LAD(6), OUTPUT3, X, 106, 1, Z )," & "82 ( BC_4, LAD(5), INPUT, X )," & "81 ( BC_1, LAD(5), OUTPUT3, X, 106, 1, Z )," & "80 ( BC_4, LAD(4), INPUT, X )," & "79 ( BC_1, LAD(4), OUTPUT3, X, 106, 1, Z )," & "78 ( BC_4, LAD(3), INPUT, X )," & "77 ( BC_1, LAD(3), OUTPUT3, X, 106, 1, Z )," & "76 ( BC_4, LAD(2), INPUT, X )," & "75 ( BC_1, LAD(2), OUTPUT3, X, 106, 1, Z )," & "74 ( BC_4, LAD(1), INPUT, X )," & "73 ( BC_1, LAD(1), OUTPUT3, X, 106, 1, Z )," & "72 ( BC_4, LPMESET, INPUT, X )," & "71 ( BC_4, LAD(0), INPUT, X )," & "70 ( BC_1, LAD(0), OUTPUT3, X, 106, 1, Z )," & "69 ( BC_1, LA(2), OUTPUT3, X, 54, 1, Z )," & "68 ( BC_1, LA(3), OUTPUT3, X, 54, 1, Z )," & "67 ( BC_1, LA(4), OUTPUT3, X, 54, 1, Z )," & "66 ( BC_1, LA(5), OUTPUT3, X, 54, 1, Z )," & "65 ( BC_1, LA(6), OUTPUT3, X, 54, 1, Z )," & "64 ( BC_1, LA(7), OUTPUT3, X, 54, 1, Z )," & "63 ( BC_1, LA(8), OUTPUT3, X, 54, 1, Z )," & "62 ( BC_4, *, INTERNAL, X )," & "61 ( BC_1, LA(9), OUTPUT3, X, 54, 1, Z )," & "60 ( BC_1, LA(10), OUTPUT3, X, 54, 1, Z )," & "59 ( BC_1, LA(11), OUTPUT3, X, 54, 1, Z )," & "58 ( BC_1, LA(12), OUTPUT3, X, 54, 1, Z )," & "57 ( BC_1, LA(13), OUTPUT3, X, 54, 1, Z )," & "56 ( BC_1, LA(14), OUTPUT3, X, 54, 1, Z )," & "55 ( BC_1, LA(15), OUTPUT3, X, 54, 1, Z )," & "54 ( BC_1, *, CONTROL, 1 )," & "53 ( BC_1, LA(16), OUTPUT3, X, 54, 1, Z )," & "52 ( BC_1, LA(17), OUTPUT3, X, 54, 1, Z )," & "51 ( BC_1, LA(18), OUTPUT3, X, 54, 1, Z )," & "50 ( BC_1, LPMINT_N, OUTPUT2, X )," & "49 ( BC_1, LA(19), OUTPUT3, X, 54, 1, Z )," & "48 ( BC_1, LA(20), OUTPUT3, X, 54, 1, Z )," & "47 ( BC_1, LA(21), OUTPUT3, X, 54, 1, Z )," & "46 ( BC_1, LA(22), OUTPUT3, X, 54, 1, Z )," & "45 ( BC_1, LA(23), OUTPUT3, X, 54, 1, Z )," & "44 ( BC_4, GPIO7_LA24, INPUT, X )," & "43 ( BC_1, GPIO7_LA24, OUTPUT3, X, 42, 1, Z )," & "42 ( BC_1, *, CONTROL, 1 )," & "41 ( BC_4, GPIO6_LA25, INPUT, X )," & "40 ( BC_1, GPIO6_LA25, OUTPUT3, X, 39, 1, Z )," & "39 ( BC_1, *, CONTROL, 1 )," & "38 ( BC_4, GPIO5_LA26, INPUT, X )," & "37 ( BC_1, GPIO5_LA26, OUTPUT3, X, 36, 1, Z )," & "36 ( BC_1, *, CONTROL, 1 )," & "35 ( BC_4, GPIO4_LA27, INPUT, X )," & "34 ( BC_1, GPIO4_LA27, OUTPUT3, X, 33, 1, Z )," & "33 ( BC_1, *, CONTROL, 1 )," & "32 ( BC_1, *, CONTROL, 1 )," & "31 ( BC_1, ADS_N, OUTPUT3, X, 32, 1, Z )," & "30 ( BC_1, BLAST_N, OUTPUT3, X, 32, 1, Z )," & "29 ( BC_1, WR_N, OUTPUT3, X, 32, 1, Z )," & "28 ( BC_1, *, CONTROL, 1 )," & "27 ( BC_1, RD_N, OUTPUT3, X, 28, 1, Z )," & "26 ( BC_1, LW_R_N, OUTPUT3, X, 32, 1, Z )," & "25 ( BC_4, READY_N, INPUT, X )," & "24 ( BC_4, BTERM_N, INPUT, X )," & "23 ( BC_4, LCLK, INPUT, X )," & "22 ( BC_1, CS0_N, OUTPUT3, X, 32, 1, Z )," & "21 ( BC_1, CS1_N, OUTPUT3, X, 32, 1, Z )," & "20 ( BC_1, LRESETo_N, OUTPUT2, X )," & "19 ( BC_1, LGNT, OUTPUT2, X )," & "18 ( BC_4, LREQ, INPUT, X )," & "17 ( BC_4, LINTi1, INPUT, X )," & "16 ( BC_4, LINTi2, INPUT, X )," & "15 ( BC_4, GPIO0_WAITo_N, INPUT, X )," & "14 ( BC_1, GPIO0_WAITo_N, OUTPUT3, X, 13, 1, Z )," & "13 ( BC_1, *, CONTROL, 1 )," & "12 ( BC_4, GPIO1_LLOCKo_N, INPUT, X )," & "11 ( BC_1, GPIO1_LLOCKo_N, OUTPUT3, X, 10, 1, Z )," & "10 ( BC_1, *, CONTROL, 1 )," & "9 ( BC_4, GPIO2_CS2_N, INPUT, X )," & "8 ( BC_1, GPIO2_CS2_N, OUTPUT3, X, 7, 1, Z )," & "7 ( BC_1, *, CONTROL, 1 )," & "6 ( BC_4, GPIO3_CS3_N, INPUT, X )," & "5 ( BC_1, GPIO3_CS3_N, OUTPUT3, X, 4, 1, Z )," & "4 ( BC_1, *, CONTROL, 1 )," & "3 ( BC_1, EECS, OUTPUT2, X )," & "2 ( BC_4, EEDO, INPUT, X )," & "1 ( BC_1, EESK, OUTPUT2, X )," & "0 ( BC_1, EEDI, OUTPUT2, X )" ; end PCI9030_PQF_r4 ;