------------------------------------------------------------------------ -- A T M E L A R M M I C R O C O N T R O L L E R S -- ------------------------------------------------------------------------ -- BSDL file -- -- File Name: AT91M55800A_BGA.BSD -- File Revision: 1.2 -- Date created: 2002-10-07 -- Created by: Atmel Corporation -- File Status: Released -- -- Device: AT91M55800A -- Package: BGA 176 -- -- Visit http://www.atmel.com for a updated list of BSDL files. -- ------------------------------------------------------------------------ -- Syntax and Semantics are checked against the IEEE 1149.1 standard. -- -- The logical functioning of the standard Boundary-Scan instructions -- -- and of the associated bypass, idcode and boundary-scan register -- -- described in this BSDL file has been verified against its related -- -- silicon by JTAG Technologies B.V. -- ------------------------------------------------------------------------ ------------------------------------------------------------------------ -- IMPORTANT NOTICE -- -- -- -- Copyright 2002 Atmel Corporation. All Rights Reserved. -- -- -- -- Atmel assumes no responsibility or liability arising out -- -- this application or use of any information described herein -- -- except as expressly agreed to in writing by Atmel Corporation. -- -- -- -- ------------------------------------------------------------------ -- -- This BSDL File has been verified on severals BSDL Syntax -- -- Checker/Compilers -- -- -- -- -- -- AGILENT 3070 BSDL COMPILER on Tue Jun 17 06:00:15 MDT 2003. -- -- BSDL File AT91M55800A_TQFP.bsd, package TQFP_176 compiled -- -- successfully. 0 ERRORS, 0 WARNINGS, OBJECT PRODUCED -- -- -- -- RS JTAG Technologies (www.jtag.com) -- -- -- -- ScanWorks from Asset-Intertech (www.asset-intertech.com) -- -- -- -- onTAP Boundary Scan Test Software (www.flynn.com) -- ------------------------------------------------------------------------ entity at56515b is -- This section identifies the default device package selected. generic (PHYSICAL_PIN_MAP: string:= "BGA_176"); -- This section declares all the ports in the design. port ( JTAGSEL : in bit; NRST : in bit; NRSTBU : linkage bit; NTRST : in bit; NWAIT : in bit; PLLRC : linkage bit; TCK : in bit; TDI : in bit; TMS : in bit; WAKEUP : linkage bit; D_0 : inout bit; D_10 : inout bit; D_11 : inout bit; D_12 : inout bit; D_13 : inout bit; D_14 : inout bit; D_15 : inout bit; D_1 : inout bit; D_2 : inout bit; D_3 : inout bit; D_4 : inout bit; D_5 : inout bit; D_6 : inout bit; D_7 : inout bit; D_8 : inout bit; D_9 : inout bit; NOE_NRD : inout bit; NUB_NWR1 : inout bit; NWE_NWR0 : inout bit; PA0TCLK3 : inout bit; PA10IRQ1 : inout bit; PA11IRQ2 : inout bit; PA12IRQ3 : inout bit; PA13FIQ : inout bit; PA14SCK0 : inout bit; PA15TXD0 : inout bit; PA16RXD0 : inout bit; PA17SCK1 : inout bit; PA18TXD1NTRI : inout bit; PA19RXD1 : inout bit; PA1TIOA3 : inout bit; PA20SCK2 : inout bit; PA21TXD2 : inout bit; PA22RXD2 : inout bit; PA23SPCK : inout bit; PA24MISO : inout bit; PA25MOSI : inout bit; PA26NPCS0NSS : inout bit; PA27NPCS1 : inout bit; PA28NPCS2 : inout bit; PA29NPCS3 : inout bit; PA2TIOB3 : inout bit; PA3TCLK4 : inout bit; PA4TIOA4 : inout bit; PA5TIOB4 : inout bit; PA6TCLK5 : inout bit; PA7TIOA5 : inout bit; PA8TIOB5 : inout bit; PA9IRQ0 : inout bit; PB0 : inout bit; PB1 : inout bit; PB10 : inout bit; PB11 : inout bit; PB12 : inout bit; PB13 : inout bit; PB14 : inout bit; PB15 : inout bit; PB16 : inout bit; PB17 : inout bit; PB18BMS : inout bit; PB19TCLK0 : inout bit; PB2 : inout bit; PB20TIOA0 : inout bit; PB21TIOB0 : inout bit; PB22TCLK1 : inout bit; PB23TIOA1 : inout bit; PB24TIOB1 : inout bit; PB25TCLK2 : inout bit; PB26TIOA2 : inout bit; PB27TIOB2 : inout bit; PB3IRQ4 : inout bit; PB4IRQ5 : inout bit; PB5 : inout bit; PB6AD0TRIG : inout bit; PB7AD1TRIG : inout bit; PB8 : inout bit; PB9 : inout bit; SHDN_RTCAL : linkage bit; A_0 : out bit; A_10 : out bit; A_11 : out bit; A_12 : out bit; A_13 : out bit; A_14 : out bit; A_15 : out bit; A_16 : out bit; A_17 : out bit; A_18 : out bit; A_19 : out bit; A_1 : out bit; A_20 : out bit; A_21 : out bit; A_22 : out bit; A_23 : out bit; A_2 : out bit; A_3 : out bit; A_4 : out bit; A_5 : out bit; A_6 : out bit; A_7 : out bit; A_8 : out bit; A_9 : out bit; MCKO : out bit; NCS0 : out bit; NCS1 : out bit; NCS2 : out bit; NCS3 : out bit; NCS4 : out bit; NCS5 : out bit; NCS6 : out bit; NCS7 : out bit; NWDOVF : out bit; TDO : out bit; DA0 : linkage bit; DA1 : linkage bit; XIN : linkage bit; XIN32 : linkage bit; XOUT : linkage bit; XOUT32 : linkage bit; AD0 : linkage bit; AD1 : linkage bit; AD2 : linkage bit; AD3 : linkage bit; AD4 : linkage bit; AD5 : linkage bit; AD6 : linkage bit; AD7 : linkage bit; ADVREF : linkage bit; DAVREF : linkage bit; GNDA : linkage bit; GNDPLL : linkage bit; VDDA : linkage bit; VDDBU : linkage bit; GNDBU : linkage bit; VDDPLL : linkage bit; GND : linkage bit_vector (1 to 16); VDDCORE : linkage bit_vector (1 to 4); VDDIO : linkage bit_vector (1 to 11) ); use STD_1149_1_1994.all; attribute COMPONENT_CONFORMANCE of at56515b: entity is "STD_1149_1_1993"; attribute PIN_MAP of at56515b: entity is PHYSICAL_PIN_MAP; -- This section specifies the pin map for each port. This information -- is extracted from the port-to-pin map file that was read in using -- the "read_pin_map" command. constant BGA_176: PIN_MAP_STRING := "AD0 : H13," & "AD1 : H12," & "AD2 : G13," & "AD3 : G12," & "AD4 : F13," & "AD5 : E13," & "AD6 : E12," & "AD7 : D14," & "ADVREF : C15," & "DAVREF : A15," & "JTAGSEL : D6," & "NRST : A3," & "NRSTBU : E14," & "NTRST : A4," & "NWAIT : A2," & "PLLRC : J15," & "TCK : D5," & "TDI : B6," & "GNDBU : E15," & "TMS : C5," & "WAKEUP : H14," & "XIN : M15," & "XIN32 : G15," & "D_0 : L3," & "D_10 : R1," & "D_11 : R2," & "D_12 : R3," & "D_13 : R4," & "D_14 : N4," & "D_15 : P5," & "D_1 : L4," & "D_2 : M1," & "D_3 : M2," & "D_4 : N1," & "D_5 : P1," & "D_6 : N2," & "D_7 : P2," & "D_8 : P3," & "D_9 : P4," & "NOE_NRD : B4," & "NUB_NWR1 : B2," & "NWE_NWR0 : B3," & "PA0TCLK3 : M9," & "PA10IRQ1 : P10," & "PA11IRQ2 : P11," & "PA12IRQ3 : R12," & "PA13FIQ : P12," & "PA14SCK0 : R13," & "PA15TXD0 : R14," & "PA16RXD0 : R15," & "PA17SCK1 : P13," & "PA18TXD1NTRI : P14," & "PA19RXD1 : N14," & "PA1TIOA3 : N8," & "PA20SCK2 : P15," & "PA21TXD2 : M13," & "PA22RXD2 : L13," & "PA23SPCK : M11," & "PA24MISO : M14," & "PA25MOSI : L12," & "PA26NPCS0NSS : L14," & "PA27NPCS1 : K14," & "PA28NPCS2 : K12," & "PA29NPCS3 : J12," & "PA2TIOB3 : P8," & "PA3TCLK4 : R8," & "PA4TIOA4 : R9," & "PA5TIOB4 : R10," & "PA6TCLK5 : R11," & "PA7TIOA5 : P9," & "PA8TIOB5 : N10," & "PA9IRQ0 : N11," & "PB0 : C12," & "PB1 : D11," & "PB10 : A9," & "PB11 : B8," & "PB12 : A8," & "PB13 : C8," & "PB14 : D9," & "PB15 : D8," & "PB16 : A7," & "PB17 : B7," & "PB18BMS : A5," & "PB19TCLK0 : N5," & "PB2 : B11," & "PB20TIOA0 : R5," & "PB21TIOB0 : M6," & "PB22TCLK1 : P6," & "PB23TIOA1 : R6," & "PB24TIOB1 : R7," & "PB25TCLK2 : N7," & "PB26TIOA2 : P7," & "PB27TIOB2 : M8," & "PB3IRQ4 : B10," & "PB4IRQ5 : C11," & "PB5 : D10," & "PB6AD0TRIG : C9," & "PB7AD1TRIG : B9," & "PB8 : A11," & "PB9 : A10," & "SHDN_RTCAL : J13," & "A_0 : C1," & "A_10 : F1," & "A_11 : H4," & "A_12 : G1," & "A_13 : H3," & "A_14 : H2," & "A_15 : H1," & "A_16 : J4," & "A_17 : J1," & "A_18 : J2," & "A_19 : K1," & "A_1 : D2," & "A_20 : L1," & "A_21 : K3," & "A_22 : K2," & "A_23 : L2," & "A_2 : D1," & "A_3 : E2," & "A_4 : E1," & "A_5 : E3," & "A_6 : F4," & "A_7 : F2," & "A_8 : G3," & "A_9 : G2," & "DA0 : C14," & "DA1 : B14," & "MCKO : C7," & "NCS0 : C2," & "NCS1 : A1," & "NCS2 : B1," & "NCS3 : D3," & "NCS4 : B13," & "NCS5 : B12," & "NCS6 : A13," & "NCS7 : A12," & "NWDOVF : A6," & "TDO : B5," & "XOUT : L15," & "XOUT32 : F15," & "GNDA : B15," & "GNDPLL : K15," & "VDDA : D15," & "VDDBU : F14," & "VDDPLL : J14," & "GND:(K4, M4, M5, M7, M10, M12, N15, A14, D4, D7, D12, E4," & "F12, G4, G14, H15)," & "VDDCORE: (C4, D13, M3, N12)," & "VDDIO: (C3, C6, C10, C13, F3, J3, K13, N3, N6, N9, N13)"; -- This section specifies the TAP ports. -- For the TAP TCK port, the parameters in the brackets are: -- First Field : Maximum TCK frequency. -- Second Field: Allowable states TCK may be stopped in. attribute TAP_SCAN_CLOCK of TCK : signal is (10.0e6, BOTH); attribute TAP_SCAN_IN of TDI : signal is true; attribute TAP_SCAN_MODE of TMS : signal is true; attribute TAP_SCAN_OUT of TDO : signal is true; attribute TAP_SCAN_RESET of NTRST: signal is true; -- Specifies the compliance enable patterns for the design. -- It lists a set of design ports and the values that they -- should be set to, in order to enable compliance to IEEE -- Std 1149.1 attribute COMPLIANCE_PATTERNS of at56515b: entity is "(JTAGSEL) (1)"; -- Specifies the number of bits in the instruction register. attribute INSTRUCTION_LENGTH of at56515b: entity is 2; -- Specifies the boundary-scan instructions implemented in the -- design and their opcodes. attribute INSTRUCTION_OPCODE of at56515b: entity is "BYPASS (11)," & "EXTEST (00)," & "SAMPLE (01)"; -- Specifies the bit pattern that is loaded into the instruction -- register when the TAP controller passes through the Capture-IR -- state. The standard mandates that the two LSBs must be "01". -- The remaining bits are design specific. attribute INSTRUCTION_CAPTURE of at56515b: entity is "01"; -- This section specifies the test data register placed between TDI -- and TDO for each implemented instruction. attribute REGISTER_ACCESS of at56515b: entity is "BYPASS (BYPASS)," & "BOUNDARY (EXTEST, SAMPLE)"; -- Specifies the length of the boundary scan register. attribute BOUNDARY_LENGTH of at56515b: entity is 256; -- The following list specifies the characteristics of each cell -- in the boundary scan register from TDI to TDO. -- The following is a description of the label fields: -- num : Is the cell number. -- cell : Is the cell type as defined by the standard. -- port : Is the design port name. Control cells do not -- have a port name. -- function: Is the function of the cell as defined by the -- standard. Is one of input, output2, output3, -- bidir, control or controlr. -- safe : Specifies the value that the BSR cell should be -- loaded with for safe operation when the software -- might otherwise choose a random value. -- ccell : The control cell number. Specifies the control -- cell that drives the output enable for this port. -- disval : Specifies the value that is loaded into the -- control cell to disable the output enable for -- the corresponding port. -- rslt : Resulting state. Shows the state of the driver -- when it is disabled. attribute BOUNDARY_REGISTER of at56515b: entity is -- -- num cell port function safe [ccell disval rslt] -- "255 (BC_1, *, controlr, 1), " & "254 (BC_1, NOE_NRD, input, X), " & "253 (BC_1, NOE_NRD, output3, X, 255, 1, Z), " & "252 (BC_1, NWE_NWR0, input, X), " & "251 (BC_1, NWE_NWR0, output3, X, 255, 1, Z), " & "250 (BC_1, NUB_NWR1, input, X), " & "249 (BC_1, NUB_NWR1, output3, X, 255, 1, Z), " & "248 (BC_1, NCS0, output3, X, 255, 1, Z), " & "247 (BC_1, NCS1, output3, X, 255, 1, Z), " & "246 (BC_1, NCS2, output3, X, 255, 1, Z), " & "245 (BC_1, NCS3, output3, X, 255, 1, Z), " & "244 (BC_1, *, controlr, 1), " & "243 (BC_1, A_0, output3, X, 244, 1, Z), " & "242 (BC_1, A_1, output3, X, 244, 1, Z), " & "241 (BC_1, A_2, output3, X, 244, 1, Z), " & "240 (BC_1, A_3, output3, X, 244, 1, Z), " & "239 (BC_1, A_4, output3, X, 244, 1, Z), " & "238 (BC_1, A_5, output3, X, 244, 1, Z), " & "237 (BC_1, A_6, output3, X, 244, 1, Z), " & "236 (BC_1, A_7, output3, X, 244, 1, Z), " & "235 (BC_1, *, controlr, 1), " & "234 (BC_1, A_8, output3, X, 235, 1, Z), " & "233 (BC_1, A_9, output3, X, 235, 1, Z), " & "232 (BC_1, A_10, output3, X, 235, 1, Z), " & "231 (BC_1, A_11, output3, X, 235, 1, Z), " & "230 (BC_1, A_12, output3, X, 235, 1, Z), " & "229 (BC_1, A_13, output3, X, 235, 1, Z), " & "228 (BC_1, A_14, output3, X, 235, 1, Z), " & "227 (BC_1, A_15, output3, X, 235, 1, Z), " & "226 (BC_1, *, controlr, 1), " & "225 (BC_1, A_16, output3, X, 226, 1, Z), " & "224 (BC_1, A_17, output3, X, 226, 1, Z), " & "223 (BC_1, A_18, output3, X, 226, 1, Z), " & "222 (BC_1, A_19, output3, X, 226, 1, Z), " & "221 (BC_1, A_20, output3, X, 226, 1, Z), " & "220 (BC_1, A_21, output3, X, 226, 1, Z), " & "219 (BC_1, A_22, output3, X, 226, 1, Z), " & "218 (BC_1, A_23, output3, X, 226, 1, Z), " & "217 (BC_1, *, controlr, 1), " & "216 (BC_1, D_0, output3, X, 217, 1, Z), " & "215 (BC_1, D_0, input, X), " & "214 (BC_1, D_1, output3, X, 217, 1, Z), " & "213 (BC_1, D_1, input, X), " & "212 (BC_1, D_2, output3, X, 217, 1, Z), " & "211 (BC_1, D_2, input, X), " & "210 (BC_1, D_3, output3, X, 217, 1, Z), " & "209 (BC_1, D_3, input, X), " & "208 (BC_1, D_4, output3, X, 217, 1, Z), " & "207 (BC_1, D_4, input, X), " & "206 (BC_1, D_5, output3, X, 217, 1, Z), " & "205 (BC_1, D_5, input, X), " & "204 (BC_1, D_6, output3, X, 217, 1, Z), " & "203 (BC_1, D_6, input, X), " & "202 (BC_1, D_7, output3, X, 217, 1, Z), " & "201 (BC_1, D_7, input, X), " & "200 (BC_1, *, controlr, 1), " & "199 (BC_1, D_8, output3, X, 200, 1, Z), " & "198 (BC_1, D_8, input, X), " & "197 (BC_1, D_9, output3, X, 200, 1, Z), " & "196 (BC_1, D_9, input, X), " & "195 (BC_1, D_10, output3, X, 200, 1, Z), " & "194 (BC_1, D_10, input, X), " & "193 (BC_1, D_11, output3, X, 200, 1, Z), " & "192 (BC_1, D_11, input, X), " & "191 (BC_1, D_12, output3, X, 200, 1, Z), " & "190 (BC_1, D_12, input, X), " & "189 (BC_1, D_13, output3, X, 200, 1, Z), " & "188 (BC_1, D_13, input, X), " & "187 (BC_1, D_14, output3, X, 200, 1, Z), " & "186 (BC_1, D_14, input, X), " & "185 (BC_1, D_15, output3, X, 200, 1, Z), " & "184 (BC_1, D_15, input, X), " & "183 (BC_1, *, controlr, 1), " & "182 (BC_1, PB19TCLK0, input, X), " & "181 (BC_1, PB19TCLK0, output3, X, 183, 1, Z), " & "180 (BC_1, *, controlr, 1), " & "179 (BC_1, PB20TIOA0, input, X), " & "178 (BC_1, PB20TIOA0, output3, X, 180, 1, Z), " & "177 (BC_1, *, controlr, 1), " & "176 (BC_1, PB21TIOB0, input, X), " & "175 (BC_1, PB21TIOB0, output3, X, 177, 1, Z), " & "174 (BC_1, *, controlr, 1), " & "173 (BC_1, PB22TCLK1, input, X), " & "172 (BC_1, PB22TCLK1, output3, X, 174, 1, Z), " & "171 (BC_1, *, controlr, 1), " & "170 (BC_1, PB23TIOA1, input, X), " & "169 (BC_1, PB23TIOA1, output3, X, 171, 1, Z), " & "168 (BC_1, *, controlr, 1), " & "167 (BC_1, PB24TIOB1, input, X), " & "166 (BC_1, PB24TIOB1, output3, X, 168, 1, Z), " & "165 (BC_1, *, controlr, 1), " & "164 (BC_1, PB25TCLK2, input, X), " & "163 (BC_1, PB25TCLK2, output3, X, 165, 1, Z), " & "162 (BC_1, *, controlr, 1), " & "161 (BC_1, PB26TIOA2, input, X), " & "160 (BC_1, PB26TIOA2, output3, X, 162, 1, Z), " & "159 (BC_1, *, controlr, 1), " & "158 (BC_1, PB27TIOB2, input, X), " & "157 (BC_1, PB27TIOB2, output3, X, 159, 1, Z), " & "156 (BC_1, *, controlr, 1), " & "155 (BC_1, PA0TCLK3, input, X), " & "154 (BC_1, PA0TCLK3, output3, X, 156, 1, Z), " & "153 (BC_1, *, controlr, 1), " & "152 (BC_1, PA1TIOA3, input, X), " & "151 (BC_1, PA1TIOA3, output3, X, 153, 1, Z), " & "150 (BC_1, *, controlr, 1), " & "149 (BC_1, PA2TIOB3, input, X), " & "148 (BC_1, PA2TIOB3, output3, X, 150, 1, Z), " & "147 (BC_1, *, controlr, 1), " & "146 (BC_1, PA3TCLK4, input, X), " & "145 (BC_1, PA3TCLK4, output3, X, 147, 1, Z), " & "144 (BC_1, *, controlr, 1), " & "143 (BC_1, PA4TIOA4, input, X), " & "142 (BC_1, PA4TIOA4, output3, X, 144, 1, Z), " & "141 (BC_1, *, controlr, 1), " & "140 (BC_1, PA5TIOB4, input, X), " & "139 (BC_1, PA5TIOB4, output3, X, 141, 1, Z), " & "138 (BC_1, *, controlr, 1), " & "137 (BC_1, PA6TCLK5, input, X), " & "136 (BC_1, PA6TCLK5, output3, X, 138, 1, Z), " & "135 (BC_1, *, controlr, 1), " & "134 (BC_1, PA7TIOA5, input, X), " & "133 (BC_1, PA7TIOA5, output3, X, 135, 1, Z), " & "132 (BC_1, *, controlr, 1), " & "131 (BC_1, PA8TIOB5, input, X), " & "130 (BC_1, PA8TIOB5, output3, X, 132, 1, Z), " & "129 (BC_1, *, controlr, 1), " & "128 (BC_1, PA9IRQ0, input, X), " & "127 (BC_1, PA9IRQ0, output3, X, 129, 1, Z), " & "126 (BC_1, *, controlr, 1), " & "125 (BC_1, PA10IRQ1, input, X), " & "124 (BC_1, PA10IRQ1, output3, X, 126, 1, Z), " & "123 (BC_1, *, controlr, 1), " & "122 (BC_1, PA11IRQ2, input, X), " & "121 (BC_1, PA11IRQ2, output3, X, 123, 1, Z), " & "120 (BC_1, *, controlr, 1), " & "119 (BC_1, PA12IRQ3, input, X), " & "118 (BC_1, PA12IRQ3, output3, X, 120, 1, Z), " & "117 (BC_1, *, controlr, 1), " & "116 (BC_1, PA13FIQ, input, X), " & "115 (BC_1, PA13FIQ, output3, X, 117, 1, Z), " & "114 (BC_1, *, controlr, 1), " & "113 (BC_1, PA14SCK0, input, X), " & "112 (BC_1, PA14SCK0, output3, X, 114, 1, Z), " & "111 (BC_1, *, controlr, 1), " & "110 (BC_1, PA15TXD0, input, X), " & "109 (BC_1, PA15TXD0, output3, X, 111, 1, Z), " & "108 (BC_1, *, controlr, 1), " & "107 (BC_1, PA16RXD0, input, X), " & "106 (BC_1, PA16RXD0, output3, X, 108, 1, Z), " & "105 (BC_1, *, controlr, 1), " & "104 (BC_1, PA17SCK1, input, X), " & "103 (BC_1, PA17SCK1, output3, X, 105, 1, Z), " & "102 (BC_1, *, controlr, 1), " & "101 (BC_1, PA18TXD1NTRI, input, X), " & "100 (BC_1, PA18TXD1NTRI, output3, X, 102, 1, Z), " & "99 (BC_1, *, controlr, 1), " & "98 (BC_1, PA19RXD1, input, X), " & "97 (BC_1, PA19RXD1, output3, X, 99, 1, Z), " & "96 (BC_1, *, controlr, 1), " & "95 (BC_1, PA20SCK2, input, X), " & "94 (BC_1, PA20SCK2, output3, X, 96, 1, Z), " & "93 (BC_1, *, controlr, 1), " & "92 (BC_1, PA21TXD2, input, X), " & "91 (BC_1, PA21TXD2, output3, X, 93, 1, Z), " & "90 (BC_1, *, controlr, 1), " & "89 (BC_1, PA22RXD2, input, X), " & "88 (BC_1, PA22RXD2, output3, X, 90, 1, Z), " & "87 (BC_1, *, controlr, 1), " & "86 (BC_1, PA23SPCK, input, X), " & "85 (BC_1, PA23SPCK, output3, X, 87, 1, Z), " & "84 (BC_1, *, controlr, 1), " & "83 (BC_1, PA24MISO, input, X), " & "82 (BC_1, PA24MISO, output3, X, 84, 1, Z), " & "81 (BC_1, *, controlr, 1), " & "80 (BC_1, PA25MOSI, input, X), " & "79 (BC_1, PA25MOSI, output3, X, 81, 1, Z), " & "78 (BC_1, *, controlr, 1), " & "77 (BC_1, PA26NPCS0NSS, input, X), " & "76 (BC_1, PA26NPCS0NSS, output3, X, 78, 1, Z), " & "75 (BC_1, *, controlr, 1), " & "74 (BC_1, PA27NPCS1, input, X), " & "73 (BC_1, PA27NPCS1, output3, X, 75, 1, Z), " & "72 (BC_1, *, controlr, 1), " & "71 (BC_1, PA28NPCS2, input, X), " & "70 (BC_1, PA28NPCS2, output3, X, 72, 1, Z), " & "69 (BC_1, *, controlr, 1), " & "68 (BC_1, PA29NPCS3, input, X), " & "67 (BC_1, PA29NPCS3, output3, X, 69, 1, Z), " & "66 (BC_1, NCS4, output3, X, 255, 1, Z), " & "65 (BC_1, NCS5, output3, X, 255, 1, Z), " & "64 (BC_1, NCS6, output3, X, 255, 1, Z), " & "63 (BC_1, NCS7, output3, X, 255, 1, Z), " & "62 (BC_1, *, controlr, 1), " & "61 (BC_1, PB0, input, X), " & "60 (BC_1, PB0, output3, X, 62, 1, Z), " & "59 (BC_1, *, controlr, 1), " & "58 (BC_1, PB1, input, X), " & "57 (BC_1, PB1, output3, X, 59, 1, Z), " & "56 (BC_1, *, controlr, 1), " & "55 (BC_1, PB2, input, X), " & "54 (BC_1, PB2, output3, X, 56, 1, Z), " & "53 (BC_1, *, controlr, 1), " & "52 (BC_1, PB3IRQ4, input, X), " & "51 (BC_1, PB3IRQ4, output3, X, 53, 1, Z), " & "50 (BC_1, *, controlr, 1), " & "49 (BC_1, PB4IRQ5, input, X), " & "48 (BC_1, PB4IRQ5, output3, X, 50, 1, Z), " & "47 (BC_1, *, controlr, 1), " & "46 (BC_1, PB5, input, X), " & "45 (BC_1, PB5, output3, X, 47, 1, Z), " & "44 (BC_1, *, controlr, 1), " & "43 (BC_1, PB6AD0TRIG, input, X), " & "42 (BC_1, PB6AD0TRIG, output3, X, 44, 1, Z), " & "41 (BC_1, *, controlr, 1), " & "40 (BC_1, PB7AD1TRIG, input, X), " & "39 (BC_1, PB7AD1TRIG, output3, X, 41, 1, Z), " & "38 (BC_1, *, controlr, 1), " & "37 (BC_1, PB8, input, X), " & "36 (BC_1, PB8, output3, X, 38, 1, Z), " & "35 (BC_1, *, controlr, 1), " & "34 (BC_1, PB9, input, X), " & "33 (BC_1, PB9, output3, X, 35, 1, Z), " & "32 (BC_1, *, controlr, 1), " & "31 (BC_1, PB10, input, X), " & "30 (BC_1, PB10, output3, X, 32, 1, Z), " & "29 (BC_1, *, controlr, 1), " & "28 (BC_1, PB11, input, X), " & "27 (BC_1, PB11, output3, X, 29, 1, Z), " & "26 (BC_1, *, controlr, 1), " & "25 (BC_1, PB12, input, X), " & "24 (BC_1, PB12, output3, X, 26, 1, Z), " & "23 (BC_1, *, controlr, 1), " & "22 (BC_1, PB13, input, X), " & "21 (BC_1, PB13, output3, X, 23, 1, Z), " & "20 (BC_1, *, controlr, 1), " & "19 (BC_1, PB14, input, X), " & "18 (BC_1, PB14, output3, X, 20, 1, Z), " & "17 (BC_1, *, controlr, 1), " & "16 (BC_1, PB15, input, X), " & "15 (BC_1, PB15, output3, X, 17, 1, Z), " & "14 (BC_1, *, controlr, 1), " & "13 (BC_1, PB16, input, X), " & "12 (BC_1, PB16, output3, X, 14, 1, Z), " & "11 (BC_1, *, controlr, 1), " & "10 (BC_1, PB17, input, X), " & "9 (BC_1, PB17, output3, X, 11, 1, Z), " & "8 (BC_1, *, controlr, 1), " & "7 (BC_1, NWDOVF, output3, X, 8, 1, Z), " & "6 (BC_1, *, controlr, 1), " & "5 (BC_1, MCKO, output3, X, 6, 1, Z), " & "4 (BC_1, *, controlr, 1), " & "3 (BC_1, PB18BMS, input, X), " & "2 (BC_1, PB18BMS, output3, X, 4, 1, Z), " & "1 (BC_1, NRST, input, X), " & "0 (BC_1, NWAIT, input, X) "; end at56515b;