-- Advanced Micro Devices MACH221 100 Pin PQFP/TQFP BSDL description -- -- Version 1.1, 4/27/1998: Remove HIGHZ JTAG instruction. jkb -- -- Written By: PLD Apps -- Date : January 08, 1997 -- Version : 1.0 -- 03/31/2000 (jkb): updated Copyright comments. -- **************************************************************** -- * Copyright 1999, 2000 Lattice/Vantis Corporation * -- * 995 Stewart Dr. Sunnyvale, Ca 94088 * -- * All rights reserved. No part of this program or publication* -- * may be reproduced, transmitted, transcribed, stored in a * -- * retrieval system, or translated into any language or * -- * computer language, in any form or by any means without this * -- * notice appearing within. * -- **************************************************************** -- * Lattice/Vantis makes no warranty for the use of this * -- * product and assumes no responsibility for any errors which * -- * may appear within. Neither does it make a commitment to * -- * update this information. * -- **************************************************************** -- * This is the template BSDL file to be used for the purpose * -- * of verifying the part's compliance with the IEEE standard * -- * 1149.1-1990. * -- **************************************************************** -- -- This file has NOT yet been verified by: -- Teradyne VICTORY v 2.10 -- - Syntax Check using BSA -- - Test vector generation using BSA -- -- Hewlett-Packard Boundary-Scan Software -- - Syntax Check -- -- Genrad Boundary-Scan Software -- - Syntax Check -- - Physical Verification -- -- **************************************************************** entity AMD_MACH221i is generic(PHYSICAL_PIN_MAP : string := "UNDEFINED"); port ( DED_IN : in bit_vector(0 to 7); -- Clocks/Inputs IO : inout bit_vector(0 to 47); -- I/O pins TCK, TMS, TDI: in bit; -- JTAG inputs TDO : out bit; -- JTAG outputs NC : linkage bit_vector(0 to 15); VCC : linkage bit_vector(0 to 7); GND : linkage bit_vector(0 to 15) ); use STD_1149_1_1990.all; -- get JTAG definitions and attributes attribute PIN_MAP of AMD_MACH221i : entity is PHYSICAL_PIN_MAP; constant PQFP_100pin : PIN_MAP_STRING := "DED_IN:(4,13,18,26,54,63,68,76), " & -- Clk/Inp Pins "IO:( 93, 94, 95, 96, 97, 99, " & -- I/O A " 6, 8, 9, 10, 11, 12, " & -- I/O B " 19, 20, 21, 22, 23, 25, " & -- I/O C " 32, 34, 35, 36, 37, 38, " & -- I/O D " 43, 44, 45, 46, 47, 49, " & -- I/O E " 56, 58, 59, 60, 61, 62, " & -- I/O F " 69, 70, 71, 72, 73, 75, " & -- I/O G " 82, 84, 85, 86, 87, 88), " & -- I/O H " TDI:3, TMS:53, TCK:28, TDO:78, " & -- JTAG "NC :( 5, 7,24,27,31,33,48,50, " & " 55,57,74,77,81,83,98,100), " & -- No Connects "VCC:(14,15,39,42,64,65,89,92), " & -- POWER "GND:( 1, 2,16,17,29,30,40,41, " & " 51,52,66,67,79,80,90,91) "; -- GROUND PINS -- END OF PIN DEFINITION constant TQFP_100pin : PIN_MAP_STRING := "DED_IN:(2,11,15,23,52,61,64,72), " & -- Clk/Inp Pins "IO:( 90, 91, 92, 93, 94, 96, " & -- I/O A " 4, 6, 7, 8, 9, 10, " & -- I/O B " 16, 17, 18, 19, 20, 22, " & -- I/O C " 29, 31, 32, 33, 34, 35, " & -- I/O D " 41, 42, 43, 44, 45, 47, " & -- I/O E " 54, 56, 57, 58, 59, 60, " & -- I/O F " 65, 66, 67, 68, 69, 71, " & -- I/O G " 78, 80, 81, 82, 83, 84), " & -- I/O H " TDI:1, TMS:51, TCK:25, TDO:74, " & -- JTAG "NC :( 3, 5,21,24,28,30,36,46, " & " 48,53,55,70,73,76,77,79, " & " 85,95,97,98), " & -- No Connect "VCC:(12,37,40,62,86,89), " & -- POWER "GND:(13,14,26,27,38,39,49,50, " & " 63,75,87,88,99,100) "; -- GROUND PINS -- END OF PIN DEFINITION attribute TAP_SCAN_IN of TDI : signal is true; attribute TAP_SCAN_MODE of TMS : signal is true; attribute TAP_SCAN_OUT of TDO : signal is true; attribute TAP_SCAN_CLOCK of TCK : signal is (20.0e6, BOTH); -- Instruction register definitions attribute INSTRUCTION_LENGTH of AMD_MACH221i : entity is 6; attribute INSTRUCTION_OPCODE of AMD_MACH221i : entity is "BYPASS (111111)," & "EXTEST (000000)," & "SAMPLE (000010)," & "IDCODE (000001)," & "PRIVATE (000101,000110,000111,001000,000011,000100," & "001110,001101,001111,010001,110000,100101," & "100110,100111,101110,110011,110010)"; attribute INSTRUCTION_CAPTURE of AMD_MACH221i : entity is "000001"; attribute INSTRUCTION_PRIVATE of AMD_MACH221i : entity is "PRIVATE"; attribute IDCODE_REGISTER of AMD_MACH221i : entity is "0000" & -- version number "0111000010101000" & -- part identification "00000000001" & -- company code "1"; -- mandatory 1 attribute REGISTER_ACCESS of AMD_MACH221i : entity is "BYPASS (BYPASS)," & "BOUNDARY (EXTEST,SAMPLE)"; -- ************************************************************** -- * BOUNDARY SCAN CELL REGISTER DESCRIPTION * -- * MACH2xx-ISP parts do not have boundary scan cells. * -- ************************************************************** attribute BOUNDARY_CELLS of AMD_MACH221i : entity is "BC_3"; attribute BOUNDARY_LENGTH of AMD_MACH221i : entity is 1; attribute BOUNDARY_REGISTER of AMD_MACH221i: entity is "0 (BC_3, *, INTERNAL, X)"; end AMD_MACH221i;