-- Copyright (C) 1996-2005 Altera Corporation
-- File Name : 8820Q208.BSD
-- Device : EPF8820
-- Package : 208-pin Quad Flat-Pack (RQFP)
-- Created by : Altera Corporation
-- BSDL Version : 2.14
-- BSDL status : Final
-- Revision : 1.0, 6/14/1996
-- History : 2.1
-- : 2.11, 8/13/1998
-- Added Conformance to STD_1149_1_1994.all
-- : 2.12, 10/18/1999
-- Update Safe bit of control cell from X to 1
-- : 2.13, 7/26/2001
-- Adds minor design warning attribute
-- : 2.14, 8/23/02
-- Changed file status from Tested to Final
-- Verification : Software syntax checked on:
-- ASSET Tool Box ver. 2.3d
-- Genrad BSDL syntax checker ver. 4.01, a component
-- of Scan Pathfinder(tm) and BasicSCAN(tm)
-- GOEPEL Electronics' CASCON-GALAXY(R) ver. 3.4
-- HP 3070 BSDL Compiler
-- JTAG Technologies PLDPROG ver. 2.7
--
-- JTAG Scan Chain Continuity Tested on:
-- GOEPEL Electronics' CASCON-GALAXY(R) ver. 3.4
--
-- Complete IEEE 1149.1 device implementation tested
-- against BSDL file by GOEPEL Electronics
--
-- Documentation : FLEX 8000 Family Datasheet
-- AN39 - JTAG Boundary Testing in Altera Devices
--
--
-- IMPORTANT NOTICE
--
-- Altera, and EPF8820 are trademarks of Altera Corporation.
-- Altera products, marketed under trademarks are protected
-- under numerous US and foreign patents and pending
-- applications, maskwork rights, and copyrights. Altera
-- warrants performance of its semiconductor products to
-- current specifications in accordance with Altera's standard
-- warranty, but reserves the right to make changes to any
-- products and services at any time without notice. Altera
-- assumes no responsibility or liability arising out of the
-- application or use of any information, product, or service
-- described herein except as expressly agreed to in writing
-- by Altera Corporation. Altera customers are advised to
-- obtain the latest version of device specifications before
-- relying on any published information and before placing
-- orders for products or services.
--
-- Special Usage Notes
-- for
-- CONF_DONE, nSTATUS, and DCLK pins
--
-- The functionality of these pins depends on whether JTAG
-- testing is performed prior to device configuration or after
-- the Device has been configured. When he device is configured
-- CONF_DONE, nSTATUS, and nCONFIG pins will be high.
--
-- CONF_DONE and nSTATUS:
-- ----------------------
-- Before Configuration, these pins are outputs and will remain
-- at logic level low. These must be declared as Linkage pins and
-- the Boundary-Scan (BS) cells associated with them must be declared
-- as internals.
-- After Configurations, these pins are inputs and must be pulled high
-- at all times with an external pull up resistor. This is reflected
-- by declaring them as inputs and declaring the BS cells associated
-- with them as input cells.
-- The BSDL file is written with nSTATUS and CONF_DONE pins as linkage
-- If you wish to use JTAG in user mode and you would like to use these
-- pins as inputs you must change their declaration from linkage to in
-- and edit to internal cell to an input.
--
-- DCLK:
-- -----
-- Before configuration, this pin is an input.
-- After configuration, the user can select to make this pin as an
-- output by selecting a special option in the software. If this
-- option is selected then this pin must be declared as linkage and
-- the BS cell associated with it becomes an internal cell. If on
-- the other hand, the user did not select this option, this will be
-- an input and the BSDL file should reflect that.
-- This BSDL file is written with DCLK as an input. If you would like
-- to use JTAG in user mode and DCLK is an selected to be an output,
-- you must change the pin declaration from in to linkage and change
-- the cell from input to internal.
--
-- For further information on how to change the BSDL file contact the
-- applications Hot Line at (800) 800-EPLD.
--
--
entity EPF8820Q208 is
generic (PHYSICAL_PIN_MAP : string := "QFP208");
port ( IOE :inout bit_vector(1 to 144);
nSP :in bit;
MSEL0 :in bit;
MSEL1 :in bit;
nCONFIG :in bit;
nSTATUS :linkage bit;
CONF_DONE :linkage bit;
DCLK :in bit;
TCK :in bit;
TDI :in bit;
TDO :out bit;
TMS :in bit;
nTRST :in bit;
DIN :in bit_vector(1 to 4);
VCC :linkage bit_vector(1 to 16);
GND :linkage bit_vector(1 to 16);
NC :linkage bit_vector(1 to 16));
use STD_1149_1_1994.all;
attribute COMPONENT_CONFORMANCE of EPF8820Q208 : entity is "STD_1149_1_1993";
attribute PIN_MAP of EPF8820Q208 : entity is PHYSICAL_PIN_MAP;
constant QFP208 : PIN_MAP_STRING :=
"IOE:(7,8,9,10,11,12,13,14,18,19,"&
"21,22,23,24,25,28,29,31,33,34,35,39,40,"&
"41,42,43,44,45,46,47,56,57,58,59,"&
"61,62,63,64,65,66,67,68,70,71,72,73,74,75,76,77,79,80,"&
"81,82,83,84,85,86,88,89,90,91,92,93,94,95,97,98,99,100,"&
"101,111,112,113,114,115,116,117,118,"&
"122,123,124,125,126,127,128,132,133,134,135,136,137,138,139,"&
"143,144,145,146,147,148,149,150,151,160,"&
"161,162,163,165,166,167,168,169,170,171,172,174,"&
"175,176,177,178,179,180, 181,183,184,"& "185,186,187,188,189,190,192,193,194,195,196,197,198,199,"&
"201,202,203,204,205),"&
"nSP:207, "&
"MSEL0:4,"&
"MSEL1:49,"&
"nSTATUS:108,"&
"nCONFIG:103,"&
"DCLK:158,"&
"CONF_DONE:153, "&
"TCK:30,"&
"TDI:20,"&
"TDO:129,"&
"TMS:32,"&
"nTRST:54," &
"DIN:(17,36,121,140)," &
"VCC:(5,6,26,27,48,55,69,87,102,119,131,141,159,173,191,206),"&
"GND:(15,16,37,38,60,78,96,109,110,"&
"120,130,142,152,164,182,200),"&
"NC:(1,2,3,50,51,52,53,104,105,106,107,154,155,156,157,208)";
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_RESET of nTRST : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (10.00e6, BOTH);
attribute INSTRUCTION_LENGTH of EPF8820Q208 : entity is 3;
attribute INSTRUCTION_OPCODE of EPF8820Q208 : entity is
"EXTEST (000), " &
"BYPASS (111), " &
"SAMPLE (101) ";
attribute INSTRUCTION_CAPTURE of EPF8820Q208 : entity is "101";
attribute BOUNDARY_LENGTH of EPF8820Q208 :entity is 465;
attribute BOUNDARY_REGISTER of EPF8820Q208 :entity is
"0 (BC_1, IOE(11), input, X ), " & -- scan 155
"1 (BC_1, *, control, 1 ), " &
"2 (BC_1, IOE(11), output3, X , 1, 1, Z), "&
"3 (BC_1, IOE(12), input, X ), " & -- scan 154
"4 (BC_1, *, control, 1 ), " &
"5 (BC_1, IOE(12), output3, X , 4, 1, Z), "&
"6 (BC_1, IOE(13), input, X ), " & -- scan 153
"7 (BC_1, *, control, 1 ), " &
"8 (BC_1, IOE(13), output3, X , 7, 1, Z), "&
"9 (BC_1, IOE(14), input, X ), " & -- scan 152
"10 (BC_1, *, control, 1 ), " &
"11 (BC_1, IOE(14), output3, X , 10, 1, Z), "&
"12 (BC_1, IOE(15), input, X ), " & -- scan 151
"13 (BC_1, *, control, 1 ), " &
"14 (BC_1, IOE(15), output3, X , 13, 1, Z), "&
"15 (BC_1, IOE(16), input, X ), " & -- scan 150
"16 (BC_1, *, control, 1 ), " &
"17 (BC_1, IOE(16), output3, X , 16, 1, Z), "&
"18 (BC_1, IOE(17), input, X ), " & -- scan 149
"19 (BC_1, *, control, 1 ), " &
"20 (BC_1, IOE(17), output3, X , 19, 1, Z), "&
"21 (BC_1, IOE(18), input, X ), " & -- scan 148
"22 (BC_1, *, control, 1 ), " &
"23 (BC_1, IOE(18), output3, X , 22, 1, Z), "&
"24 (BC_1, IOE(19), input, X ), " & -- scan 147
"25 (BC_1, *, control, 1 ), " &
"26 (BC_1, IOE(19), output3, X , 25, 1, Z), "&
"27 (BC_1, IOE(20), input, X ), " & -- scan 146
"28 (BC_1, *, control, 1 ), " &
"29 (BC_1, IOE(20), output3, X , 28, 1, Z), "&
"30 (BC_1, IOE(21), input, X ), " & -- scan 145
"31 (BC_1, *, control, 1 ), " &
"32 (BC_1, IOE(21), output3, X , 31, 1, Z), "&
"33 (BC_1, DIN(2), input, X ), " & -- scan 144
"34 (BC_4, *, internal, 1 ), " &
"35 (BC_4, *, internal, X ), " &
"36 (BC_1, IOE(22), input, X ), " & -- scan 143
"37 (BC_1, *, control, 1 ), " &
"38 (BC_1, IOE(22), output3, X , 37, 1, Z), "&
"39 (BC_1, IOE(23), input, X ), " & -- scan 142
"40 (BC_1, *, control, 1 ), " &
"41 (BC_1, IOE(23), output3, X , 40, 1, Z), "&
"42 (BC_1, IOE(24), input, X ), " & -- scan 141
"43 (BC_1, *, control, 1 ), " &
"44 (BC_1, IOE(24), output3, X , 43, 1, Z), "&
"45 (BC_1, IOE(25), input, X ), " & -- scan 140
"46 (BC_1, *, control, 1 ), " &
"47 (BC_1, IOE(25), output3, X , 46, 1, Z), "&
"48 (BC_1, IOE(26), input, X ), " & -- scan 139
"49 (BC_1, *, control, 1 ), " &
"50 (BC_1, IOE(26), output3, X , 49, 1, Z), "&
"51 (BC_1, IOE(27), input, X ), " & -- scan 138
"52 (BC_1, *, control, 1 ), " &
"53 (BC_1, IOE(27), output3, X , 52, 1, Z), "&
"54 (BC_1, IOE(28), input, X ), " & -- scan 137
"55 (BC_1, *, control, 1 ), " &
"56 (BC_1, IOE(28), output3, X , 55, 1, Z), "&
"57 (BC_1, IOE(29), input, X ), " & -- scan 136
"58 (BC_1, *, control, 1 ), " &
"59 (BC_1, IOE(29), output3, X , 58, 1, Z), "&
"60 (BC_1, IOE(30), input, X ), " & -- scan 135
"61 (BC_1, *, control, 1 ), " &
"62 (BC_1, IOE(30), output3, X , 61, 1, Z), "&
"63 (BC_4, MSEL1, input, X ), " & -- scan 134
"64 (BC_4, *, internal, 1 ), " &
"65 (BC_4, *, internal, X ), " &
"66 (BC_1, IOE(31), input, X ), " & -- scan 133
"67 (BC_1, *, control, 1 ), " &
"68 (BC_1, IOE(31), output3, X , 67, 1, Z), "&
"69 (BC_1, IOE(32), input, X ), " & -- scan 132
"70 (BC_1, *, control, 1 ), " &
"71 (BC_1, IOE(32), output3, X , 70, 1, Z), "&
"72 (BC_1, IOE(33), input, X ), " & -- scan 131
"73 (BC_1, *, control, 1 ), " &
"74 (BC_1, IOE(33), output3, X , 73, 1, Z), "&
"75 (BC_1, IOE(34), input, X ), " & -- scan 130
"76 (BC_1, *, control, 1 ), " &
"77 (BC_1, IOE(34), output3, X , 76, 1, Z), "&
"78 (BC_1, IOE(35), input, X ), " & -- scan 129
"79 (BC_1, *, control, 1 ), " &
"80 (BC_1, IOE(35), output3, X , 79, 1, Z), "&
"81 (BC_1, IOE(36), input, X ), " & -- scan 128
"82 (BC_1, *, control, 1 ), " &
"83 (BC_1, IOE(36), output3, X , 82, 1, Z), "&
"84 (BC_1, IOE(37), input, X ), " & -- scan 127
"85 (BC_1, *, control, 1 ), " &
"86 (BC_1, IOE(37), output3, X , 85, 1, Z), "&
"87 (BC_1, IOE(38), input, X ), " & -- scan 126
"88 (BC_1, *, control, 1 ), " &
"89 (BC_1, IOE(38), output3, X , 88, 1, Z), "&
"90 (BC_1, IOE(39), input, X ), " & -- scan 125
"91 (BC_1, *, control, 1 ), " &
"92 (BC_1, IOE(39), output3, X , 91, 1, Z), "&
"93 (BC_1, IOE(40), input, X ), " & -- scan 124
"94 (BC_1, *, control, 1 ), " &
"95 (BC_1, IOE(40), output3, X , 94, 1, Z), "&
"96 (BC_1, IOE(41), input, X ), " & -- scan 123
"97 (BC_1, *, control, 1 ), " &
"98 (BC_1, IOE(41), output3, X , 97, 1, Z), "&
"99 (BC_1, IOE(42), input, X ), " & -- scan 122
"100 (BC_1, *, control, 1 ), " &
"101 (BC_1, IOE(42), output3, X , 100, 1, Z), "&
"102 (BC_1, IOE(43), input, X ), " & -- scan 121
"103 (BC_1, *, control, 1 ), " &
"104 (BC_1, IOE(43), output3, X , 103, 1, Z), "&
"105 (BC_1, IOE(44), input, X ), " & -- scan 120
"106 (BC_1, *, control, 1 ), " &
"107 (BC_1, IOE(44), output3, X , 106, 1, Z), "&
"108 (BC_1, IOE(45), input, X ), " & -- scan 119
"109 (BC_1, *, control, 1 ), " &
"110 (BC_1, IOE(45), output3, X , 109, 1, Z), "&
"111 (BC_1, IOE(46), input, X ), " & -- scan 118
"112 (BC_1, *, control, 1 ), " &
"113 (BC_1, IOE(46), output3, X , 112, 1, Z), "&
"114 (BC_1, IOE(47), input, X ), " & -- scan 117
"115 (BC_1, *, control, 1 ), " &
"116 (BC_1, IOE(47), output3, X , 115, 1, Z), "&
"117 (BC_1, IOE(48), input, X ), " & -- scan 116
"118 (BC_1, *, control, 1 ), " &
"119 (BC_1, IOE(48), output3, X , 118, 1, Z), "&
"120 (BC_1, IOE(49), input, X ), " & -- scan 115
"121 (BC_1, *, control, 1 ), " &
"122 (BC_1, IOE(49), output3, X , 121, 1, Z), "&
"123 (BC_1, IOE(50), input, X ), " & -- scan 114
"124 (BC_1, *, control, 1 ), " &
"125 (BC_1, IOE(50), output3, X , 124, 1, Z), "&
"126 (BC_1, IOE(51), input, X ), " & -- scan 113
"127 (BC_1, *, control, 1 ), " &
"128 (BC_1, IOE(51), output3, X , 127, 1, Z), "&
"129 (BC_1, IOE(52), input, X ), " & -- scan 112
"130 (BC_1, *, control, 1 ), " &
"131 (BC_1, IOE(52), output3, X , 130, 1, Z), "&
"132 (BC_1, IOE(53), input, X ), " & -- scan 111
"133 (BC_1, *, control, 1 ), " &
"134 (BC_1, IOE(53), output3, X , 133, 1, Z), "&
"135 (BC_1, IOE(54), input, X ), " & -- scan 110
"136 (BC_1, *, control, 1 ), " &
"137 (BC_1, IOE(54), output3, X , 136, 1, Z), "&
"138 (BC_1, IOE(55), input, X ), " & --scan 109
"139 (BC_1, *, control, 1 ), " &
"140 (BC_1, IOE(55), output3, X , 139, 1, Z), "&
"141 (BC_1, IOE(56), input, X ), " & --scan 108
"142 (BC_1, *, control, 1 ), " &
"143 (BC_1, IOE(56), output3, X , 142, 1, Z), "&
"144 (BC_1, IOE(57), input, X ), " & -- scan 107
"145 (BC_1, *, control, 1 ), " &
"146 (BC_1, IOE(57), output3, X , 145, 1, Z), "&
"147 (BC_1, IOE(58), input, X ), " & -- scan 106
"148 (BC_1, *, control, 1 ), " &
"149 (BC_1, IOE(58), output3, X , 148, 1, Z), "&
"150 (BC_1, IOE(59), input, X ), " & -- scan 105
"151 (BC_1, *, control, 1 ), " &
"152 (BC_1, IOE(59), output3, X , 151, 1, Z), "&
"153 (BC_1, IOE(60), input, X ), " & -- scan 104
"154 (BC_1, *, control, 1 ), " &
"155 (BC_1, IOE(60), output3, X , 154, 1, Z), "&
"156 (BC_1, IOE(61), input, X ), " & -- scan 103
"157 (BC_1, *, control, 1 ), " &
"158 (BC_1, IOE(61), output3, X , 157, 1, Z), "&
"159 (BC_1, IOE(62), input, X ), " & -- scan 102
"160 (BC_1, *, control, 1 ), " &
"161 (BC_1, IOE(62), output3, X , 160, 1, Z), "&
"162 (BC_1, IOE(63), input, X ), " & -- scan 101
"163 (BC_1, *, control, 1 ), " &
"164 (BC_1, IOE(63), output3, X , 163, 1, Z), "&
"165 (BC_1, IOE(64), input, X ), " & -- scan 100
"166 (BC_1, *, control, 1 ), " &
"167 (BC_1, IOE(64), output3, X , 166, 1, Z), "&
"168 (BC_1, IOE(65), input, X ), " & -- scan 99
"169 (BC_1, *, control, 1 ), " &
"170 (BC_1, IOE(65), output3, X , 169, 1, Z), "&
"171 (BC_1, IOE(66), input, X ), " & -- scan 98
"172 (BC_1, *, control, 1 ), " &
"173 (BC_1, IOE(66), output3, X , 172, 1, Z), "&
"174 (BC_1, IOE(67), input, X ), " & -- scan 97
"175 (BC_1, *, control, 1 ), " &
"176 (BC_1, IOE(67), output3, X , 175, 1, Z), "&
"177 (BC_1, IOE(68), input, X ), " & -- scan 96
"178 (BC_1, *, control, 1 ), " &
"179 (BC_1, IOE(68), output3, X , 178, 1, Z), "&
"180 (BC_1, IOE(69), input, X ), " & -- scan 95
"181 (BC_1, *, control, 1 ), " &
"182 (BC_1, IOE(69), output3, X , 181, 1, Z), "&
"183 (BC_1, IOE(70), input, X ), " & -- scan 94
"184 (BC_1, *, control, 1 ), " &
"185 (BC_1, IOE(70), output3, X , 184, 1, Z), "&
"186 (BC_1, IOE(71), input, X ), " & -- scan 93
"187 (BC_1, *, control, 1 ), " &
"188 (BC_1, IOE(71), output3, X , 187, 1, Z), "&
"189 (BC_4, nCONFIG, input, X ), " & -- scan 92
"190 (BC_4, *, internal, 1 ), " &
"191 (BC_4, *, internal, X ), " &
"192 (BC_4, *, internal, X ), " & -- scan 91 nSTATUS
"193 (BC_4, *, internal, 1 ), " &
"194 (BC_4, *, internal, X ), " &
"195 (BC_1, IOE(72), input, X ), " & -- scan 90
"196 (BC_1, *, control, 1 ), " &
"197 (BC_1, IOE(72), output3, X , 196, 1, Z), "&
"198 (BC_1, IOE(73), input, X ), " & -- scan 89
"199 (BC_1, *, control, 1 ), " &
"200 (BC_1, IOE(73), output3, X , 199, 1, Z), "&
"201 (BC_1, IOE(74), input, X ), " & -- scan 88
"202 (BC_1, *, control, 1 ), " &
"203 (BC_1, IOE(74), output3, X , 202, 1, Z), "&
"204 (BC_1, IOE(75), input, X ), " & -- scan 87
"205 (BC_1, *, control, 1 ), " &
"206 (BC_1, IOE(75), output3, X , 205, 1, Z), "&
"207 (BC_1, IOE(76), input, X ), " & -- scan 86
"208 (BC_1, *, control, 1 ), " &
"209 (BC_1, IOE(76), output3, X , 208, 1, Z), "&
"210 (BC_1, IOE(77), input, X ), " & -- scan 85
"211 (BC_1, *, control, 1 ), " &
"212 (BC_1, IOE(77), output3, X , 211, 1, Z), "&
"213 (BC_1, IOE(78), input, X ), " & -- scan 84
"214 (BC_1, *, control, 1 ), " &
"215 (BC_1, IOE(78), output3, X , 214, 1, Z), "&
"216 (BC_1, IOE(79), input, X ), " & -- scan 83
"217 (BC_1, *, control, 1 ), " &
"218 (BC_1, IOE(79), output3, X , 217, 1, Z), "&
"219 (BC_1, DIN(3), input, X ), " & -- scan 82
"220 (BC_4, *, internal, 1 ), " &
"221 (BC_4, *, internal, X ), " &
"222 (BC_1, IOE(80), input, X ), " & -- scan 81
"223 (BC_1, *, control, 1 ), " &
"224 (BC_1, IOE(80), output3, X , 223, 1, Z), "&
"225 (BC_1, IOE(81), input, X ), " & -- scan 80
"226 (BC_1, *, control, 1 ), " &
"227 (BC_1, IOE(81), output3, X , 226, 1, Z), "&
"228 (BC_1, IOE(82), input, X ), " & -- scan 79
"229 (BC_1, *, control, 1 ), " &
"230 (BC_1, IOE(82), output3, X , 229, 1, Z), "&
"231 (BC_1, IOE(83), input, X ), " & -- scan 78
"232 (BC_1, *, control, 1 ), " &
"233 (BC_1, IOE(83), output3, X , 232, 1, Z), "&
"234 (BC_1, IOE(84), input, X ), " & -- scan 77
"235 (BC_1, *, control, 1 ), " &
"236 (BC_1, IOE(84), output3, X , 235, 1, Z), "&
"237 (BC_1, IOE(85), input, X ), " & -- scan 76
"238 (BC_1, *, control, 1 ), " &
"239 (BC_1, IOE(85), output3, X , 238, 1, Z), "&
"240 (BC_1, IOE(86), input, X ), " & -- scan 75
"241 (BC_1, *, control, 1 ), " &
"242 (BC_1, IOE(86), output3, X , 241, 1, Z), "&
"243 (BC_1, IOE(87), input, X ), " & -- scan 74
"244 (BC_1, *, control, 1 ), " &
"245 (BC_1, IOE(87), output3, X , 244, 1, Z), "&
"246 (BC_1, IOE(88), input, X ), " & -- scan 73
"247 (BC_1, *, control, 1 ), " &
"248 (BC_1, IOE(88), output3, X , 247, 1, Z), "&
"249 (BC_1, IOE(89), input, X ), " & -- scan 72
"250 (BC_1, *, control, 1 ), " &
"251 (BC_1, IOE(89), output3, X , 250, 1, Z), "&
"252 (BC_1, IOE(90), input, X ), " & -- scan 71
"253 (BC_1, *, control, 1 ), " &
"254 (BC_1, IOE(90), output3, X , 253, 1, Z), "&
"255 (BC_1, IOE(91), input, X ), " & -- scan 70
"256 (BC_1, *, control, 1 ), " &
"257 (BC_1, IOE(91), output3, X , 256, 1, Z), "&
"258 (BC_1, IOE(92), input, X ), " & -- scan 69
"259 (BC_1, *, control, 1 ), " &
"260 (BC_1, IOE(92), output3, X , 259, 1, Z), "&
"261 (BC_1, IOE(93), input, X ), " & -- scan 68
"262 (BC_1, *, control, 1 ), " &
"263 (BC_1, IOE(93), output3, X , 262, 1, Z), "&
"264 (BC_1, IOE(94), input, X ), " & -- scan 67
"265 (BC_1, *, control, 1 ), " &
"266 (BC_1, IOE(94), output3, X , 265, 1, Z), "&
"267 (BC_1, DIN(4), input, X ), " & -- scan 66
"268 (BC_4, *, internal, 1 ), " &
"269 (BC_4, *, internal, X ), " &
"270 (BC_1, IOE(95), input, X ), " & -- scan 65
"271 (BC_1, *, control, 1 ), " &
"272 (BC_1, IOE(95), output3, X , 271, 1, Z), "&
"273 (BC_1, IOE(96), input, X ), " & -- scan 64
"274 (BC_1, *, control, 1 ), " &
"275 (BC_1, IOE(96), output3, X , 274, 1, Z), "&
"276 (BC_1, IOE(97), input, X ), " & -- scan 63
"277 (BC_1, *, control, 1 ), " &
"278 (BC_1, IOE(97), output3, X , 277, 1, Z), "&
"279 (BC_1, IOE(98), input, X ), " & -- scan 62
"280 (BC_1, *, control, 1 ), " &
"281 (BC_1, IOE(98), output3, X , 280, 1, Z), "&
"282 (BC_1, IOE(99), input, X ), " & -- scan 61
"283 (BC_1, *, control, 1 ), " &
"284 (BC_1, IOE(99), output3, X , 283, 1, Z), "&
"285 (BC_1, IOE(100), input, X ), " & -- scan 60
"286 (BC_1, *, control, 1 ), " &
"287 (BC_1, IOE(100), output3, X , 286, 1, Z), "&
"288 (BC_1, IOE(101), input, X ), " & -- scan 59
"289 (BC_1, *, control, 1 ), " &
"290 (BC_1, IOE(101), output3, X , 289, 1, Z), "&
"291 (BC_1, IOE(102), input, X ), " & -- scan 58
"292 (BC_1, *, control, 1 ), " &
"293 (BC_1, IOE(102), output3, X , 292, 1, Z), "&
"294 (BC_1, IOE(103), input, X ), " & -- scan 57
"295 (BC_1, *, control, 1 ), " &
"296 (BC_1, IOE(103), output3, X , 295, 1, Z), "&
"297 (BC_4, *, internal, X ), " & -- scan 56 CONF_DONE
"298 (BC_4, *, internal, 1 ), " &
"299 (BC_4, *, internal, X ), " &
"300 (BC_4, DCLK, input, X ), " & -- scan 55
"301 (BC_4, *, internal, 1 ), " &
"302 (BC_4, *, internal, X ), " &
"303 (BC_1, IOE(104), input, X ), " & -- scan 54
"304 (BC_1, *, control, 1 ), " &
"305 (BC_1, IOE(104), output3, X , 304, 1, Z), "&
"306 (BC_1, IOE(105), input, X ), " & -- scan 53
"307 (BC_1, *, control, 1 ), " &
"308 (BC_1, IOE(105), output3, X , 307, 1, Z), "&
"309 (BC_1, IOE(106), input, X ), " & -- scan 52
"310 (BC_1, *, control, 1 ), " &
"311 (BC_1, IOE(106), output3, X , 310, 1, Z), "&
"312 (BC_1, IOE(107), input, X ), " & -- scan 51
"313 (BC_1, *, control, 1 ), " &
"314 (BC_1, IOE(107), output3, X , 313, 1, Z), "&
"315 (BC_1, IOE(108), input, X ), " & -- scan 50
"316 (BC_1, *, control, 1 ), " &
"317 (BC_1, IOE(108), output3, X , 316, 1, Z), "&
"318 (BC_1, IOE(109), input, X ), " & -- scan 49
"319 (BC_1, *, control, 1 ), " &
"320 (BC_1, IOE(109), output3, X , 319, 1, Z), "&
"321 (BC_1, IOE(110), input, X ), " & -- scan 48
"322 (BC_1, *, control, 1 ), " &
"323 (BC_1, IOE(110), output3, X , 322, 1, Z), "&
"324 (BC_1, IOE(111), input, X ), " & -- scan 47
"325 (BC_1, *, control, 1 ), " &
"326 (BC_1, IOE(111), output3, X , 325, 1, Z), "&
"327 (BC_1, IOE(112), input, X ), " & -- scan 46
"328 (BC_1, *, control, 1 ), " &
"329 (BC_1, IOE(112), output3, X , 328, 1, Z), "&
"330 (BC_1, IOE(113), input, X ), " & -- scan 45
"331 (BC_1, *, control, 1 ), " &
"332 (BC_1, IOE(113), output3, X , 331, 1, Z), "&
"333 (BC_1, IOE(114), input, X ), " & -- scan 44
"334 (BC_1, *, control, 1 ), " &
"335 (BC_1, IOE(114), output3, X , 334, 1, Z), "&
"336 (BC_1, IOE(115), input, X ), " & -- scan 43
"337 (BC_1, *, control, 1 ), " &
"338 (BC_1, IOE(115), output3, X , 337, 1, Z), "&
"339 (BC_1, IOE(116), input, X ), " & -- scan 42
"340 (BC_1, *, control, 1 ), " &
"341 (BC_1, IOE(116), output3, X , 340, 1, Z), "&
"342 (BC_1, IOE(117), input, X ), " & -- scan 41
"343 (BC_1, *, control, 1 ), " &
"344 (BC_1, IOE(117), output3, X , 343, 1, Z), "&
"345 (BC_1, IOE(118), input, X ), " & -- scan 40
"346 (BC_1, *, control, 1 ), " &
"347 (BC_1, IOE(118), output3, X , 346, 1, Z), "&
"348 (BC_1, IOE(119), input, X ), " & -- scan 39
"349 (BC_1, *, control, 1 ), " &
"350 (BC_1, IOE(119), output3, X , 349, 1, Z), "&
"351 (BC_1, IOE(120), input, X ), " & -- scan 38
"352 (BC_1, *, control, 1 ), " &
"353 (BC_1, IOE(120), output3, X , 352, 1, Z), "&
"354 (BC_1, IOE(121), input, X ), " & -- scan 37
"355 (BC_1, *, control, 1 ), " &
"356 (BC_1, IOE(121), output3, X , 355, 1, Z), "&
"357 (BC_1, IOE(122), input, X ), " & -- scan 36
"358 (BC_1, *, control, 1 ), " &
"359 (BC_1, IOE(122), output3, X , 358, 1, Z), "&
"360 (BC_1, IOE(123), input, X ), " & -- scan 35
"361 (BC_1, *, control, 1 ), " &
"362 (BC_1, IOE(123), output3, X , 361, 1, Z), "&
"363 (BC_1, IOE(124), input, X ), " & -- scan 34
"364 (BC_1, *, control, 1 ), " &
"365 (BC_1, IOE(124), output3, X , 364, 1, Z), "&
"366 (BC_1, IOE(125), input, X ), " & -- scan 33
"367 (BC_1, *, control, 1 ), " &
"368 (BC_1, IOE(125), output3, X , 367, 1, Z), "&
"369 (BC_1, IOE(126), input, X ), " & -- scan 32
"370 (BC_1, *, control, 1 ), " &
"371 (BC_1, IOE(126), output3, X , 370, 1, Z), "&
"372 (BC_1, IOE(127), input, X ), " & -- scan 31
"373 (BC_1, *, control, 1 ), " &
"374 (BC_1, IOE(127), output3, X , 373, 1, Z), "&
"375 (BC_1, IOE(128), input, X ), " & -- scan 30
"376 (BC_1, *, control, 1 ), " &
"377 (BC_1, IOE(128), output3, X , 376, 1, Z), "&
"378 (BC_1, IOE(129), input, X ), " & -- scan 29
"379 (BC_1, *, control, 1 ), " &
"380 (BC_1, IOE(129), output3, X , 379, 1, Z), "&
"381 (BC_1, IOE(130), input, X ), " & -- scan 28
"382 (BC_1, *, control, 1 ), " &
"383 (BC_1, IOE(130), output3, X , 382, 1, Z), "&
"384 (BC_1, IOE(131), input, X ), " & -- scan 27
"385 (BC_1, *, control, 1 ), " &
"386 (BC_1, IOE(131), output3, X , 385, 1, Z), "&
"387 (BC_1, IOE(132), input, X ), " & -- scan 26
"388 (BC_1, *, control, 1 ), " &
"389 (BC_1, IOE(132), output3, X , 388, 1, Z), "&
"390 (BC_1, IOE(133), input, X ), " & -- scan 25
"391 (BC_1, *, control, 1 ), " &
"392 (BC_1, IOE(133), output3, X , 391, 1, Z), "&
"393 (BC_1, IOE(134), input, X ), " & -- scan 24
"394 (BC_1, *, control, 1 ), " &
"395 (BC_1, IOE(134), output3, X , 394, 1, Z), "&
"396 (BC_1, IOE(135), input, X ), " & -- scan 23
"397 (BC_1, *, control, 1 ), " &
"398 (BC_1, IOE(135), output3, X , 397, 1, Z), "&
"399 (BC_1, IOE(136), input, X ), " & -- scan 22
"400 (BC_1, *, control, 1 ), " &
"401 (BC_1, IOE(136), output3, X , 400, 1, Z), "&
"402 (BC_1, IOE(137), input, X ), " & -- scan 21
"403 (BC_1, *, control, 1 ), " &
"404 (BC_1, IOE(137), output3, X , 403, 1, Z), "&
"405 (BC_1, IOE(138), input, X ), " & -- scan 20
"406 (BC_1, *, control, 1 ), " &
"407 (BC_1, IOE(138), output3, X , 406, 1, Z), "&
"408 (BC_1, IOE(139), input, X ), " & -- scan 19
"409 (BC_1, *, control, 1 ), " &
"410 (BC_1, IOE(139), output3, X , 409, 1, Z), "&
"411 (BC_1, IOE(140), input, X ), " & -- scan 18
"412 (BC_1, *, control, 1 ), " &
"413 (BC_1, IOE(140), output3, X , 412, 1, Z), "&
"414 (BC_1, IOE(141), input, X ), " & -- scan 17
"415 (BC_1, *, control, 1 ), " &
"416 (BC_1, IOE(141), output3, X , 415, 1, Z), "&
"417 (BC_1, IOE(142), input, X ), " & -- scan 16
"418 (BC_1, *, control, 1 ), " &
"419 (BC_1, IOE(142), output3, X , 418, 1, Z), "&
"420 (BC_1, IOE(143), input, X ), " & -- scan 15
"421 (BC_1, *, control, 1 ), " &
"422 (BC_1, IOE(143), output3, X , 421, 1, Z), "&
"423 (BC_1, IOE(144), input, X ), " & -- scan 14
"424 (BC_1, *, control, 1 ), " &
"425 (BC_1, IOE(144), output3, X , 424, 1, Z), "&
"426 (BC_4, nSP, input, X ), " & -- scan 13
"427 (BC_4, *, internal, 1 ), " &
"428 (BC_4, *, internal, X ), " &
"429 (BC_4, MSEL0, input, X ), " & -- scan 12
"430 (BC_4, *, internal, 1 ), " &
"431 (BC_4, *, internal, X ), " &
"432 (BC_1, IOE(1), input, X ), " & -- scan 11
"433 (BC_1, *, control, 1 ), " &
"434 (BC_1, IOE(1), output3, X , 433, 1, Z), "&
"435 (BC_1, IOE(2), input, X ), " & -- scan 10
"436 (BC_1, *, control, 1 ), " &
"437 (BC_1, IOE(2), output3, X , 436, 1, Z), "&
"438 (BC_1, IOE(3), input, X ), " & -- scan 9
"439 (BC_1, *, control, 1 ), " &
"440 (BC_1, IOE(3), output3, X , 439, 1, Z), "&
"441 (BC_1, IOE(4), input, X ), " & -- scan 8
"442 (BC_1, *, control, 1 ), " &
"443 (BC_1, IOE(4), output3, X , 442, 1, Z), "&
"444 (BC_1, IOE(5), input, X ), " & -- scan 7
"445 (BC_1, *, control, 1 ), " &
"446 (BC_1, IOE(5), output3, X , 445, 1, Z), "&
"447 (BC_1, IOE(6), input, X ), " & -- scan 6
"448 (BC_1, *, control, 1 ), " &
"449 (BC_1, IOE(6), output3, X , 448, 1, Z), "&
"450 (BC_1, IOE(7), input, X ), " & -- scan 5
"451 (BC_1, *, control, 1 ), " &
"452 (BC_1, IOE(7), output3, X , 451, 1, Z), "&
"453 (BC_1, IOE(8), input, X ), " & -- scan 4
"454 (BC_1, *, control, 1 ), " &
"455 (BC_1, IOE(8), output3, X , 454, 1, Z), "&
"456 (BC_1, DIN(1), input, X ), " & -- scan 3
"457 (BC_4, *, internal, 1 ), " &
"458 (BC_4, *, internal, X ), " &
"459 (BC_1, IOE(9), input, X ), " & -- scan 2
"460 (BC_1, *, control, 1 ), " &
"461 (BC_1, IOE(9), output3, X , 460, 1, Z), "&
"462 (BC_1, IOE(10), input, X ), " & -- scan 1
"463 (BC_1, *, control, 1 ), " &
"464 (BC_1, IOE(10), output3, X , 463, 1, Z)";
-- *********************************************************************
-- * DESIGN WARNING *
-- *********************************************************************
attribute DESIGN_WARNING of EPF8820Q208 : entity is
"The FLEX 8000/A devices support IEEE 1149.1 testing before and "&
"after device configuration; however, the devices do not support "&
"this testing during device configuration. The easiest way to "&
"avoid device configuration is to hold the nCONFIG pin low during "&
"power-up and testing.";
end EPF8820Q208;
