-- BSDL file for the Ultra37064 in the 44-pin PLCC package
-- Initial release 1.0 2/23/99
entity D064P44J is
generic (PHYSICAL_PIN_MAP:string:= "UNDEFINED");
port (
JTAGen:in bit;
TDI :in bit;
TCK :in bit;
TMS :in bit;
TDO :out bit;
IO_31 :inout bit;
IO_30 :inout bit;
IO_29 :inout bit;
IO_28 :inout bit;
-- IO_27 :inout bit;
IO_26 :inout bit;
IO_25 :inout bit;
IO_24 :inout bit;
IO_23 :inout bit;
IO_22 :inout bit;
IO_21 :inout bit;
IO_20 :inout bit;
-- IO_19 :inout bit;
IO_18 :inout bit;
IO_17 :inout bit;
IO_16 :inout bit;
IO_15 :inout bit;
IO_14 :inout bit;
-- IO_13 :inout bit;
IO_12 :inout bit;
IO_11 :inout bit;
IO_10 :inout bit;
IO_9 :inout bit;
IO_8 :inout bit;
IO_7 :inout bit;
IO_6 :inout bit;
-- IO_5 :inout bit;
IO_4 :inout bit;
IO_3 :inout bit;
IO_2 :inout bit;
IO_1 :inout bit;
IO_0 :inout bit;
INP_4 :in bit;
INP_3 :in bit;
INP_2 :in bit;
INP_1 :in bit;
INP_0 :in bit;
GND :linkage bit_vector(1 to 4);
VCCEXT :linkage bit;
VCCINT :linkage bit
);
use STD_1149_1_1994.all;-- needed for attribute compliance patterns
attribute COMPONENT_CONFORMANCE of D064P44J : entity is
"STD_1149_1_1993";
attribute PIN_MAP of D064P44J:entity is PHYSICAL_PIN_MAP;
constant p84J_package:PIN_MAP_STRING:=
"JTAGen :11 ," &
"TDI :39 ," &
"TCK :7 ," &
"TMS :19 ," &
"TDO :27 ," &
"IO_31 :43 ," &
"IO_30 :42 ," &
"IO_29 :41 ," &
"IO_28 :40 ," &
"IO_26 :38 ," &
"IO_25 :37 ," &
"IO_24 :36 ," &
"IO_23 :31 ," &
"IO_22 :30 ," &
"IO_21 :29 ," &
"IO_20 :28 ," &
"IO_18 :26 ," &
"IO_17 :25 ," &
"IO_16 :24 ," &
"IO_15 :21 ," &
"IO_14 :20 ," &
"IO_12 :18 ," &
"IO_11 :17 ," &
"IO_10 :16 ," &
"IO_9 :15 ," &
"IO_8 :14 ," &
"IO_7 :9 ," &
"IO_6 :8 ," &
"IO_4 :6 ," &
"IO_3 :5 ," &
"IO_2 :4 ," &
"IO_1 :3 ," &
"IO_0 :2 ," &
"inp_4 :35 ," &
"inp_3 :33 ," &
"inp_2 :32 ," &
"inp_1 :13 ," &
"inp_0 :10 ," &
"GND :(1,12,23,34)," &
"VCCEXT :44 ," &
"VCCINT :22 ";
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (2.0e6, BOTH);
--The compliance_pattern attribute is needed to choose
--the JTAG function from the dual function pins.
attribute compliance_patterns of D064P44J : entity is
"(JTAGen) (1)";
attribute INSTRUCTION_LENGTH of D064P44J : entity is 6;
attribute INSTRUCTION_OPCODE of D064P44J : entity is
"BYPASS ( 111111)," &
"SAMPLE( 000010)," &
"EXTEST ( 000000)," &
"IDCODE ( 000100)," &
"USERCODEX ( 000111)";
attribute INSTRUCTION_CAPTURE of D064P44J : entity is "000001";
attribute IDCODE_REGISTER of D064P44J : entity is
"XX00" & -- version
"1000000100000010" & -- part number
"00000110100" & -- manufacturer's id
"1"; -- required by standard
attribute REGISTER_ACCESS of D064P44J : entity is
"USER_CODE[16] (USERCODEX CAPTURES XXXXXXXXXXXXXXXX)" ;
attribute BOUNDARY_LENGTH of D064P44J : entity is 89;
attribute BOUNDARY_REGISTER of D064P44J : entity is
" 88(BC_4, IO_31, input, X), " &
" 87(BC_1, IO_31, output3, X, 86, 0, Z), " &
" 86(BC_1, *, control , 0), " &
" 85(BC_4, IO_30, input, X), " &
" 84(BC_1, IO_30, output3, X, 83, 0, Z), " &
" 83(BC_1, *, control , 0), " &
" 82(BC_4, IO_29, input, X), " &
" 81(BC_1, IO_29, output3, X, 80, 0, Z), " &
" 80(BC_1, *, control , 0), " &
" 79(BC_4, IO_28, input, X), " &
" 78(BC_1, IO_28, output3, X, 77, 0, Z), " &
" 77(BC_1, *, control , 0), " &
" 76(BC_4, IO_26, input, X), " &
" 75(BC_1, IO_26, output3, X, 74, 0, Z), " &
" 74(BC_1, *, control , 0), " &
" 73(BC_4, IO_25, input, X), " &
" 72(BC_1, IO_25, output3, X, 71, 0, Z), " &
" 71(BC_1, *, control , 0), " &
" 70(BC_4, IO_24, input, X), " &
" 69(BC_1, IO_24, output3, X, 68, 0, Z), " &
" 68(BC_1, *, control , 0), " &
" 67(BC_4, IO_23, input, X), " &
" 66(BC_1, IO_23, output3, X, 65, 0, Z), " &
" 65(BC_1, *, control , 0), " &
" 64(BC_4, IO_22, input, X), " &
" 63(BC_1, IO_22, output3, X, 62, 0, Z), " &
" 62(BC_1, *, control , 0), " &
" 61(BC_4, IO_21, input, X), " &
" 60(BC_1, IO_21, output3, X, 59, 0, Z), " &
" 59(BC_1, *, control , 0), " &
" 58(BC_4, IO_20, input, X), " &
" 57(BC_1, IO_20, output3, X, 56, 0, Z), " &
" 56(BC_1, *, control , 0), " &
" 55(BC_4, IO_18, input, X), " &
" 54(BC_1, IO_18, output3, X, 53, 0, Z), " &
" 53(BC_1, *, control , 0), " &
" 52(BC_4, IO_17, input, X), " &
" 51(BC_1, IO_17, output3, X, 50, 0, Z), " &
" 50(BC_1, *, control , 0), " &
" 49(BC_4, IO_16, input, X), " &
" 48(BC_1, IO_16, output3, X, 47, 0, Z), " &
" 47(BC_1, *, control , 0), " &
" 46(BC_4, inp_3, input, X), " &
" 45(BC_4, inp_2, clock, X), " &
" 44(BC_4, inp_1, clock, X), " &
" 43(BC_4, inp_4, clock, X), " &
" 42(BC_4, inp_0, clock, X), " &
" 41(BC_4, IO_15, input, X), " &
" 40(BC_1, IO_15, output3, X, 39, 0, Z), " &
" 39(BC_1, *, control , 0), " &
" 38(BC_4, IO_14, input, X), " &
" 37(BC_1, IO_14, output3, X, 36, 0, Z), " &
" 36(BC_1, *, control , 0), " &
" 35(BC_4, IO_12, input, X), " &
" 34(BC_1, IO_12, output3, X, 33, 0, Z), " &
" 33(BC_1, *, control , 0), " &
" 32(BC_4, IO_11, input, X), " &
" 31(BC_1, IO_11, output3, X, 30, 0, Z), " &
" 30(BC_1, *, control , 0), " &
" 29(BC_4, IO_10, input, X), " &
" 28(BC_1, IO_10, output3, X, 27, 0, Z), " &
" 27(BC_1, *, control , 0), " &
" 26(BC_4, IO_9, input, X), " &
" 25(BC_1, IO_9, output3, X, 24, 0, Z), " &
" 24(BC_1, *, control , 0), " &
" 23(BC_4, IO_8, input, X), " &
" 22(BC_1, IO_8, output3, X, 21, 0, Z), " &
" 21(BC_1, *, control , 0), " &
" 20(BC_4, IO_7, input, X), " &
" 19(BC_1, IO_7, output3, X, 18, 0, Z), " &
" 18(BC_1, *, control , 0), " &
" 17(BC_4, IO_6, input, X), " &
" 16(BC_1, IO_6, output3, X, 15, 0, Z), " &
" 15(BC_1, *, control , 0), " &
" 14(BC_4, IO_4, input, X), " &
" 13(BC_1, IO_4, output3, X, 12, 0, Z), " &
" 12(BC_1, *, control , 0), " &
" 11(BC_4, IO_3, input, X), " &
" 10(BC_1, IO_3, output3, X, 9, 0, Z), " &
" 9(BC_1, *, control , 0), " &
" 8(BC_4, IO_2, input, X), " &
" 7(BC_1, IO_2, output3, X, 6, 0, Z), " &
" 6(BC_1, *, control , 0), " &
" 5(BC_4, IO_1, input, X), " &
" 4(BC_1, IO_1, output3, X, 3, 0, Z), " &
" 3(BC_1, *, control , 0), " &
" 2(BC_4, IO_0, input, X), " &
" 1(BC_1, IO_0, output3, X, 0, 0, Z), " &
" 0(BC_1, *, control , 0)";
attribute DESIGN_WARNING of D064P44J: entity is
" The SAMPLE instruction is only to be used in" &
" conjunction with the EXTEST operation." &
" The SAMPLE instruction is non-1149.1 compliant" &
" wrt a logic analyzer(INTEST) capability for" &
" capturing macrocell output and associated output" &
" enable data on I/O pins. The captured macrocell" &
" data is potentially inverted from the data present" &
" on the I/O pin and the captured output enable data" &
" is always inverted from the output enable signal " &
" controlling the I/O pin. ";
end D064P44J;