BSDL Files Library for JTAG

The only free public library that contains thousands of BSDL (Boundary Scan Description Language) models to use with BScan/JTAG tools

BSDL model: XC4013XLT_PQ240

--$ XILINX$RCSfile: xc4013xlt_pq240.bsd,v $
--$ XILINX$Revision: 1.1 $
--
-- BSDL file for device XC4013XLT, package PQ240
-- Xilinx, Inc. $State: PRELIMINARY $ $Date: 1997-10-01 21:29:43+00 $
-- Generated by createBSDL 2.6
--
-- For technical support, contact Xilinx as follows:
--	North America	1-800-255-7778		hotline@xilinx.com
--	United Kingdom	(44) 1932 820821	ukhelp@xilinx.com
--	France		(33) 1 3463 0100	frhelp@xilinx.com
--	Germany		(49) 89 991 54930	dlhelp@xilinx.com
--	Japan		(81) 3-3297-9163	jhotline@xilinx.com
--

-- This BSDL file reflects the pre-configuration JTAG behavior. To reflect
-- the post-configuration JTAG behavior (if any), edit this file as described
-- below. Many of these changes are demonstrated by commented-out template
-- lines preceeding the lines they would replace:
-- 	
-- 1. Enable USER instructions as appropriate (see below).
-- 2. For inputs using uncontrolled paths (e.g. PGCK, SGCK), change
-- 	boundary cell function from 'input' to 'clock' or 'observe_only'.
-- 3. Set disable result of all pads as configured.
-- 4. Set safe state of boundary cells as necessary.
-- 5. Set safe state of INIT output to X, or as necessary (see below).
-- 6. Rename entity if necessary to avoid name collisions.
-- 7. Change INIT port direction from "in" to "inout" (see below).
-- 8. Change COMPLIANCE_PATTERNS to "(PROGRAM) (1)" (see below).
-- 9. Change INIT boundary cells from internal to controlr, output3,
-- 	and input, respectively (see below).
-- 10. Remove the design warning regarding keeping INIT low.
-- 
-- NOTE: Post-configuration JTAG is available only if the BSCAN symbol
-- 	is instantiated in the FPGA design.
-- NOTE: PULLUP symbols must be instantiated on the TMS and TDI pins
-- 	in the FPGA design to comply with IEEE Std. 1149.1-1993.

entity XC4013XLT_PQ240 is

generic (PHYSICAL_PIN_MAP : string := "PQ240" );

port (
	CCLK: linkage bit;
	DONE: linkage bit;
	GND: linkage bit_vector (1 to 24);
-- INIT is not a compliance enable after configuration. For post-configuration
-- operation un-comment the next line and comment out the following line so
-- that INIT is of type inout.
-- 	INIT: inout bit;
	INIT: in bit; 
	IO2: inout bit;
	IO3: inout bit;
	IO4: inout bit;
	IO5: inout bit;
	IO6: inout bit;
	IO7: inout bit;
	IO9: inout bit;
	IO10: inout bit;
	IO14: inout bit;
	IO15: inout bit;
	IO16: inout bit;
	IO18: inout bit;
	IO19: inout bit;
	IO20: inout bit;
	IO21: inout bit;
	IO22: inout bit;
	IO23: inout bit;
	IO26: inout bit;
	IO27: inout bit;
	IO28: inout bit;
	IO29: inout bit;
	IO30: inout bit;
	IO31: inout bit;
	IO35: inout bit;
	IO36: inout bit;
	IO37: inout bit;
	IO38: inout bit;
	IO43: inout bit;
	IO44: inout bit;
	IO45: inout bit;
	IO46: inout bit;
	IO47: inout bit;
	IO48: inout bit;
	IO50: inout bit;
	IO51: inout bit;
	IO56: inout bit;
	IO57: inout bit;
	IO59: inout bit;
	IO60: inout bit;
	IO61: inout bit;
	IO62: inout bit;
	IO63: inout bit;
	IO65: inout bit;
	IO69: inout bit;
	IO70: inout bit;
	IO71: inout bit;
	IO72: inout bit;
	IO73: inout bit;
	IO74: inout bit;
	IO76: inout bit;
	IO77: inout bit;
	IO81: inout bit;
	IO82: inout bit;
	IO83: inout bit;
	IO85: inout bit;
	IO86: inout bit;
	IO87: inout bit;
	IO88: inout bit;
	IO89: inout bit;
	IO90: inout bit;
	IO93: inout bit;
	IO94: inout bit;
	IO95: inout bit;
	IO96: inout bit;
	IO97: inout bit;
	IO98: inout bit;
	IO105: inout bit;
	IO106: inout bit;
	IO107: inout bit;
	IO108: inout bit;
	IO109: inout bit;
	IO110: inout bit;
	IO113: inout bit;
	IO114: inout bit;
	IO115: inout bit;
	IO116: inout bit;
	IO117: inout bit;
	IO118: inout bit;
	IO120: inout bit;
	IO121: inout bit;
	IO122: inout bit;
	IO126: inout bit;
	IO127: inout bit;
	IO129: inout bit;
	IO130: inout bit;
	IO131: inout bit;
	IO132: inout bit;
	IO133: inout bit;
	IO137: inout bit;
	IO138: inout bit;
	IO139: inout bit;
	IO140: inout bit;
	IO141: inout bit;
	IO142: inout bit;
	IO144: inout bit;
	IO145: inout bit;
	IO149: inout bit;
	IO150: inout bit;
	IO151: inout bit;
	IO153: inout bit;
	IO154: inout bit;
	IO155: inout bit;
	IO156: inout bit;
	IO157: inout bit;
	IO158: inout bit;
	IO161: inout bit;
	IO162: inout bit;
	IO163: inout bit;
	IO164: inout bit;
	IO165: inout bit;
	IO166: inout bit;
	IO172: inout bit;
	IO173: inout bit;
	IO174: inout bit;
	IO175: inout bit;
	IO176: inout bit;
	IO177: inout bit;
	IO180: inout bit;
	IO181: inout bit;
	IO182: inout bit;
	IO183: inout bit;
	IO184: inout bit;
	IO185: inout bit;
	IO187: inout bit;
	IO188: inout bit;
	IO189: inout bit;
	IO193: inout bit;
	IO194: inout bit;
	IO196: inout bit;
	IO197: inout bit;
	IO198: inout bit;
	IO199: inout bit;
	IO200: inout bit;
	IO201: inout bit;
	IO204: inout bit;
	IO205: inout bit;
	IO206: inout bit;
	IO207: inout bit;
	IO208: inout bit;
	IO209: inout bit;
	IO211: inout bit;
	IO212: inout bit;
	IO216: inout bit;
	IO217: inout bit;
	IO218: inout bit;
	IO220: inout bit;
	IO221: inout bit;
	IO222: inout bit;
	IO223: inout bit;
	IO224: inout bit;
	IO225: inout bit;
	IO228: inout bit;
	IO229: inout bit;
	IO230: inout bit;
	IO231: inout bit;
	IO232: inout bit;
	IO233: inout bit;
	IO239: inout bit;
	IO240: inout bit;
	IO241: inout bit;
	IO242: inout bit;
	IO243: inout bit;
	IO244: inout bit;
	IO247: inout bit;
	IO248: inout bit;
	IO249: inout bit;
	IO250: inout bit;
	IO251: inout bit;
	IO252: inout bit;
	IO254: inout bit;
	IO255: inout bit;
	IO256: inout bit;
	IO260: inout bit;
	IO261: inout bit;
	IO263: inout bit;
	IO264: inout bit;
	IO265: inout bit;
	IO266: inout bit;
	IO267: inout bit;
	IO268: inout bit;
	M0: in bit;
	M1: inout bit;
	M2: in bit;
	PROGRAM: in bit;
	TCK: in bit;
	TDI: in bit;
	TDO: out bit;
	TMS: in bit;
	VDD: linkage bit_vector (1 to 16);
	VTT: linkage bit_vector (1 to 8)
); --end port list

use STD_1149_1_1994.all;

attribute COMPONENT_CONFORMANCE of XC4013XLT_PQ240 : entity is
	"STD_1149_1_1993";

attribute PIN_MAP of XC4013XLT_PQ240 : entity is PHYSICAL_PIN_MAP;

constant PQ240: PIN_MAP_STRING:=
	"CCLK:P179," &
	"DONE:P120," &
	"GND:(P219,P227,P1,P14,P22,P29,P37,P45,P59,P75," &
		"P83,P91,P98,P106,P119,P135,P143,P151,P158,P166," &
		"P182,P196,P204,P211)," &
	"INIT:P89," &
	"IO2:P213," &
	"IO3:P214," &
	"IO4:P215," &
	"IO5:P216," &
	"IO6:P217," &
	"IO7:P218," &
	"IO9:P220," &
	"IO10:P221," &
	"IO14:P224," &
	"IO15:P225," &
	"IO16:P226," &
	"IO18:P228," &
	"IO19:P229," &
	"IO20:P230," &
	"IO21:P231," &
	"IO22:P232," &
	"IO23:P233," &
	"IO26:P234," &
	"IO27:P235," &
	"IO28:P236," &
	"IO29:P237," &
	"IO30:P238," &
	"IO31:P239," &
	"IO35:P2," &
	"IO36:P3," &
	"IO37:P4," &
	"IO38:P5," &
	"IO43:P8," &
	"IO44:P9," &
	"IO45:P10," &
	"IO46:P11," &
	"IO47:P12," &
	"IO48:P13," &
	"IO50:P15," &
	"IO51:P16," &
	"IO56:P20," &
	"IO57:P21," &
	"IO59:P23," &
	"IO60:P24," &
	"IO61:P25," &
	"IO62:P26," &
	"IO63:P27," &
	"IO65:P28," &
	"IO69:P31," &
	"IO70:P32," &
	"IO71:P33," &
	"IO72:P34," &
	"IO73:P35," &
	"IO74:P36," &
	"IO76:P38," &
	"IO77:P39," &
	"IO81:P42," &
	"IO82:P43," &
	"IO83:P44," &
	"IO85:P46," &
	"IO86:P47," &
	"IO87:P48," &
	"IO88:P49," &
	"IO89:P50," &
	"IO90:P51," &
	"IO93:P52," &
	"IO94:P53," &
	"IO95:P54," &
	"IO96:P55," &
	"IO97:P56," &
	"IO98:P57," &
	"IO105:P63," &
	"IO106:P64," &
	"IO107:P65," &
	"IO108:P66," &
	"IO109:P67," &
	"IO110:P68," &
	"IO113:P69," &
	"IO114:P70," &
	"IO115:P71," &
	"IO116:P72," &
	"IO117:P73," &
	"IO118:P74," &
	"IO120:P76," &
	"IO121:P77," &
	"IO122:P78," &
	"IO126:P81," &
	"IO127:P82," &
	"IO129:P84," &
	"IO130:P85," &
	"IO131:P86," &
	"IO132:P87," &
	"IO133:P88," &
	"IO137:P92," &
	"IO138:P93," &
	"IO139:P94," &
	"IO140:P95," &
	"IO141:P96," &
	"IO142:P97," &
	"IO144:P99," &
	"IO145:P100," &
	"IO149:P103," &
	"IO150:P104," &
	"IO151:P105," &
	"IO153:P107," &
	"IO154:P108," &
	"IO155:P109," &
	"IO156:P110," &
	"IO157:P111," &
	"IO158:P112," &
	"IO161:P113," &
	"IO162:P114," &
	"IO163:P115," &
	"IO164:P116," &
	"IO165:P117," &
	"IO166:P118," &
	"IO172:P123," &
	"IO173:P124," &
	"IO174:P125," &
	"IO175:P126," &
	"IO176:P127," &
	"IO177:P128," &
	"IO180:P129," &
	"IO181:P130," &
	"IO182:P131," &
	"IO183:P132," &
	"IO184:P133," &
	"IO185:P134," &
	"IO187:P136," &
	"IO188:P137," &
	"IO189:P138," &
	"IO193:P141," &
	"IO194:P142," &
	"IO196:P144," &
	"IO197:P145," &
	"IO198:P146," &
	"IO199:P147," &
	"IO200:P148," &
	"IO201:P149," &
	"IO204:P152," &
	"IO205:P153," &
	"IO206:P154," &
	"IO207:P155," &
	"IO208:P156," &
	"IO209:P157," &
	"IO211:P159," &
	"IO212:P160," &
	"IO216:P163," &
	"IO217:P164," &
	"IO218:P165," &
	"IO220:P167," &
	"IO221:P168," &
	"IO222:P169," &
	"IO223:P170," &
	"IO224:P171," &
	"IO225:P172," &
	"IO228:P173," &
	"IO229:P174," &
	"IO230:P175," &
	"IO231:P176," &
	"IO232:P177," &
	"IO233:P178," &
	"IO239:P183," &
	"IO240:P184," &
	"IO241:P185," &
	"IO242:P186," &
	"IO243:P187," &
	"IO244:P188," &
	"IO247:P189," &
	"IO248:P190," &
	"IO249:P191," &
	"IO250:P192," &
	"IO251:P193," &
	"IO252:P194," &
	"IO254:P197," &
	"IO255:P198," &
	"IO256:P199," &
	"IO260:P202," &
	"IO261:P203," &
	"IO263:P205," &
	"IO264:P206," &
	"IO265:P207," &
	"IO266:P208," &
	"IO267:P209," &
	"IO268:P210," &
	"M0:P60," &
	"M1:P58," &
	"M2:P62," &
	"PROGRAM:P122," &
	"TCK:P7," &
	"TDI:P6," &
	"TDO:P181," &
	"TMS:P17," &
	"VDD:(P212,P222,P240,P19,P30,P40,P61,P80,P90,P101," &
		"P121,P140,P150,P161,P180,P201)," &
	"VTT:(P223,P18,P41,P79,P102,P139,P162,P200)";
--end pin map

attribute TAP_SCAN_IN    of TDI : signal is true;
attribute TAP_SCAN_MODE  of TMS : signal is true;
attribute TAP_SCAN_OUT   of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (2.0e6, LOW);
-- This is conservative. Real max is expected to be (~5MHz, BOTH).

attribute COMPLIANCE_PATTERNS of XC4013XLT_PQ240 : entity is
-- INIT is not a compliance enable after configuration. For post-configuration
-- operation un-comment the next line and comment out the corresponding line
-- below.
-- 	"(PROGRAM) (1)";
-- 
-- NOTE: If INIT has been high or floating since the later of power-on
-- 	and the last rising transition of PROGRAM, then the device may
-- 	be in configuration mode in which case some JTAG instructions
-- 	will not be available.
	"(INIT,PROGRAM) (01)"; 

attribute INSTRUCTION_LENGTH of XC4013XLT_PQ240 : entity is 3;

attribute INSTRUCTION_OPCODE of XC4013XLT_PQ240 : entity is
	"SAMPLE (001)," & -- Internal capture not valid until after config
	"RESERVED (110)," &
	"READBACK (100)," & -- Not available during configuration
	"CONFIGURE (101)," & -- Not available during configuration
	"USER2 (011)," & -- Not available until after configuration
	"USER1 (010)," & -- Not available until after configuration
	"EXTEST (000)," & -- Not available during configuration
	"BYPASS (111)";

attribute INSTRUCTION_CAPTURE of XC4013XLT_PQ240 : entity is "X01";
-- MSB of instruction capture is low during configuration.

-- If the device is configured, and a USER instruction is implemented
-- and not private to the FPGA designer, then it should be removed
-- from INSTRUCTION_PRIVATE, and the target register should be defined
-- in REGISTER_ACCESS.

attribute INSTRUCTION_PRIVATE of XC4013XLT_PQ240 : entity is
	"USER1," &
	"USER2," &
	"READBACK," &
	"RESERVED," &
	"CONFIGURE";

attribute REGISTER_ACCESS of XC4013XLT_PQ240 : entity is
--	"<reg_name>[<length>] (USER1)," &
--	"<reg_name>[<length>] (USER2)," &
	"BYPASS (BYPASS)," &
	"BOUNDARY (SAMPLE,EXTEST)";

attribute BOUNDARY_LENGTH of XC4013XLT_PQ240 : entity is 584;

attribute BOUNDARY_REGISTER of XC4013XLT_PQ240 : entity is
-- cellnum (type, port, function, safe[, ccell, disval, disrslt])
	"   0 (BC_1, *, internal, X)," &
	"   1 (BC_1, *, internal, X)," &
	"   2 (BC_1, *, controlr, 1)," &
	"   3 (BC_1, IO239, output3, X, 2, 1, PULL1)," &
	"   4 (BC_1, IO239, input, X)," &
	"   5 (BC_1, *, controlr, 1)," &
	"   6 (BC_1, IO240, output3, X, 5, 1, PULL1)," &
	"   7 (BC_1, IO240, input, X)," &
	"   8 (BC_1, *, controlr, 1)," &
	"   9 (BC_1, IO241, output3, X, 8, 1, PULL1)," &
	"  10 (BC_1, IO241, input, X)," &
	"  11 (BC_1, *, controlr, 1)," &
	"  12 (BC_1, IO242, output3, X, 11, 1, PULL1)," &
	"  13 (BC_1, IO242, input, X)," &
	"  14 (BC_1, *, controlr, 1)," &
	"  15 (BC_1, IO243, output3, X, 14, 1, PULL1)," &
	"  16 (BC_1, IO243, input, X)," &
	"  17 (BC_1, *, controlr, 1)," &
	"  18 (BC_1, IO244, output3, X, 17, 1, PULL1)," &
	"  19 (BC_1, IO244, input, X)," &
	"  20 (BC_1, *, controlr, 1)," &
	"  21 (BC_1, IO247, output3, X, 20, 1, PULL1)," &
	"  22 (BC_1, IO247, input, X)," &
	"  23 (BC_1, *, controlr, 1)," &
	"  24 (BC_1, IO248, output3, X, 23, 1, PULL1)," &
	"  25 (BC_1, IO248, input, X)," &
	"  26 (BC_1, *, controlr, 1)," &
	"  27 (BC_1, IO249, output3, X, 26, 1, PULL1)," &
	"  28 (BC_1, IO249, input, X)," &
	"  29 (BC_1, *, controlr, 1)," &
	"  30 (BC_1, IO250, output3, X, 29, 1, PULL1)," &
	"  31 (BC_1, IO250, input, X)," &
	"  32 (BC_1, *, controlr, 1)," &
	"  33 (BC_1, IO251, output3, X, 32, 1, PULL1)," &
	"  34 (BC_1, IO251, input, X)," &
	"  35 (BC_1, *, controlr, 1)," &
	"  36 (BC_1, IO252, output3, X, 35, 1, PULL1)," &
	"  37 (BC_1, IO252, input, X)," &
	"  38 (BC_1, *, controlr, 1)," &
	"  39 (BC_1, IO254, output3, X, 38, 1, PULL1)," &
	"  40 (BC_1, IO254, input, X)," &
	"  41 (BC_1, *, controlr, 1)," &
	"  42 (BC_1, IO255, output3, X, 41, 1, PULL1)," &
	"  43 (BC_1, IO255, input, X)," &
	"  44 (BC_1, *, controlr, 1)," &
	"  45 (BC_1, IO256, output3, X, 44, 1, PULL1)," &
	"  46 (BC_1, IO256, input, X)," &
	"  47 (BC_1, *, internal, 1)," & -- IO257.T
	"  48 (BC_1, *, internal, X)," & -- IO257.O
	"  49 (BC_1, *, internal, X)," & -- IO257.I
	"  50 (BC_1, *, controlr, 1)," &
	"  51 (BC_1, IO260, output3, X, 50, 1, PULL1)," &
	"  52 (BC_1, IO260, input, X)," &
	"  53 (BC_1, *, controlr, 1)," &
	"  54 (BC_1, IO261, output3, X, 53, 1, PULL1)," &
	"  55 (BC_1, IO261, input, X)," &
	"  56 (BC_1, *, controlr, 1)," &
	"  57 (BC_1, IO263, output3, X, 56, 1, PULL1)," &
	"  58 (BC_1, IO263, input, X)," &
	"  59 (BC_1, *, controlr, 1)," &
	"  60 (BC_1, IO264, output3, X, 59, 1, PULL1)," &
	"  61 (BC_1, IO264, input, X)," &
	"  62 (BC_1, *, controlr, 1)," &
	"  63 (BC_1, IO265, output3, X, 62, 1, PULL1)," &
	"  64 (BC_1, IO265, input, X)," &
	"  65 (BC_1, *, controlr, 1)," &
	"  66 (BC_1, IO266, output3, X, 65, 1, PULL1)," &
	"  67 (BC_1, IO266, input, X)," &
	"  68 (BC_1, *, controlr, 1)," &
	"  69 (BC_1, IO267, output3, X, 68, 1, PULL1)," &
	"  70 (BC_1, IO267, input, X)," &
	"  71 (BC_1, *, controlr, 1)," &
	"  72 (BC_1, IO268, output3, X, 71, 1, PULL1)," &
	"  73 (BC_1, IO268, input, X)," &
	"  74 (BC_1, *, controlr, 1)," &
	"  75 (BC_1, IO2, output3, X, 74, 1, PULL1)," &
	"  76 (BC_1, IO2, input, X)," &
	"  77 (BC_1, *, controlr, 1)," &
	"  78 (BC_1, IO3, output3, X, 77, 1, PULL1)," &
	"  79 (BC_1, IO3, input, X)," &
	"  80 (BC_1, *, controlr, 1)," &
	"  81 (BC_1, IO4, output3, X, 80, 1, PULL1)," &
	"  82 (BC_1, IO4, input, X)," &
	"  83 (BC_1, *, controlr, 1)," &
	"  84 (BC_1, IO5, output3, X, 83, 1, PULL1)," &
	"  85 (BC_1, IO5, input, X)," &
	"  86 (BC_1, *, controlr, 1)," &
	"  87 (BC_1, IO6, output3, X, 86, 1, PULL1)," &
	"  88 (BC_1, IO6, input, X)," &
	"  89 (BC_1, *, controlr, 1)," &
	"  90 (BC_1, IO7, output3, X, 89, 1, PULL1)," &
	"  91 (BC_1, IO7, input, X)," &
	"  92 (BC_1, *, controlr, 1)," &
	"  93 (BC_1, IO9, output3, X, 92, 1, PULL1)," &
	"  94 (BC_1, IO9, input, X)," &
	"  95 (BC_1, *, controlr, 1)," &
	"  96 (BC_1, IO10, output3, X, 95, 1, PULL1)," &
	"  97 (BC_1, IO10, input, X)," &
	"  98 (BC_1, *, internal, 1)," & -- IO13.T
	"  99 (BC_1, *, internal, X)," & -- IO13.O
	" 100 (BC_1, *, internal, X)," & -- IO13.I
	" 101 (BC_1, *, controlr, 1)," &
	" 102 (BC_1, IO14, output3, X, 101, 1, PULL1)," &
	" 103 (BC_1, IO14, input, X)," &
	" 104 (BC_1, *, controlr, 1)," &
	" 105 (BC_1, IO15, output3, X, 104, 1, PULL1)," &
	" 106 (BC_1, IO15, input, X)," &
	" 107 (BC_1, *, controlr, 1)," &
	" 108 (BC_1, IO16, output3, X, 107, 1, PULL1)," &
	" 109 (BC_1, IO16, input, X)," &
	" 110 (BC_1, *, controlr, 1)," &
	" 111 (BC_1, IO18, output3, X, 110, 1, PULL1)," &
	" 112 (BC_1, IO18, input, X)," &
	" 113 (BC_1, *, controlr, 1)," &
	" 114 (BC_1, IO19, output3, X, 113, 1, PULL1)," &
	" 115 (BC_1, IO19, input, X)," &
	" 116 (BC_1, *, controlr, 1)," &
	" 117 (BC_1, IO20, output3, X, 116, 1, PULL1)," &
	" 118 (BC_1, IO20, input, X)," &
	" 119 (BC_1, *, controlr, 1)," &
	" 120 (BC_1, IO21, output3, X, 119, 1, PULL1)," &
	" 121 (BC_1, IO21, input, X)," &
	" 122 (BC_1, *, controlr, 1)," &
	" 123 (BC_1, IO22, output3, X, 122, 1, PULL1)," &
	" 124 (BC_1, IO22, input, X)," &
	" 125 (BC_1, *, controlr, 1)," &
	" 126 (BC_1, IO23, output3, X, 125, 1, PULL1)," &
	" 127 (BC_1, IO23, input, X)," &
	" 128 (BC_1, *, controlr, 1)," &
	" 129 (BC_1, IO26, output3, X, 128, 1, PULL1)," &
	" 130 (BC_1, IO26, input, X)," &
	" 131 (BC_1, *, controlr, 1)," &
	" 132 (BC_1, IO27, output3, X, 131, 1, PULL1)," &
	" 133 (BC_1, IO27, input, X)," &
	" 134 (BC_1, *, controlr, 1)," &
	" 135 (BC_1, IO28, output3, X, 134, 1, PULL1)," &
	" 136 (BC_1, IO28, input, X)," &
	" 137 (BC_1, *, controlr, 1)," &
	" 138 (BC_1, IO29, output3, X, 137, 1, PULL1)," &
	" 139 (BC_1, IO29, input, X)," &
	" 140 (BC_1, *, controlr, 1)," &
	" 141 (BC_1, IO30, output3, X, 140, 1, PULL1)," &
	" 142 (BC_1, IO30, input, X)," &
	" 143 (BC_1, *, controlr, 1)," &
	" 144 (BC_1, IO31, output3, X, 143, 1, PULL1)," &
	" 145 (BC_1, IO31, input, X)," &
	" 146 (BC_1, *, controlr, 1)," &
	" 147 (BC_1, IO35, output3, X, 146, 1, PULL1)," &
	" 148 (BC_1, IO35, input, X)," &
	" 149 (BC_1, *, controlr, 1)," &
	" 150 (BC_1, IO36, output3, X, 149, 1, PULL1)," &
	" 151 (BC_1, IO36, input, X)," &
	" 152 (BC_1, *, controlr, 1)," &
	" 153 (BC_1, IO37, output3, X, 152, 1, PULL1)," &
	" 154 (BC_1, IO37, input, X)," &
	" 155 (BC_1, *, controlr, 1)," &
	" 156 (BC_1, IO38, output3, X, 155, 1, PULL1)," &
	" 157 (BC_1, IO38, input, X)," &
	" 158 (BC_1, *, internal, X)," &
	" 159 (BC_1, *, internal, X)," &
	" 160 (BC_1, *, internal, X)," &
	" 161 (BC_1, *, internal, X)," &
	" 162 (BC_1, *, internal, X)," &
	" 163 (BC_1, *, internal, X)," &
	" 164 (BC_1, *, controlr, 1)," &
	" 165 (BC_1, IO43, output3, X, 164, 1, PULL1)," &
	" 166 (BC_1, IO43, input, X)," &
	" 167 (BC_1, *, controlr, 1)," &
	" 168 (BC_1, IO44, output3, X, 167, 1, PULL1)," &
	" 169 (BC_1, IO44, input, X)," &
	" 170 (BC_1, *, controlr, 1)," &
	" 171 (BC_1, IO45, output3, X, 170, 1, PULL1)," &
	" 172 (BC_1, IO45, input, X)," &
	" 173 (BC_1, *, controlr, 1)," &
	" 174 (BC_1, IO46, output3, X, 173, 1, PULL1)," &
	" 175 (BC_1, IO46, input, X)," &
	" 176 (BC_1, *, controlr, 1)," &
	" 177 (BC_1, IO47, output3, X, 176, 1, PULL1)," &
	" 178 (BC_1, IO47, input, X)," &
	" 179 (BC_1, *, controlr, 1)," &
	" 180 (BC_1, IO48, output3, X, 179, 1, PULL1)," &
	" 181 (BC_1, IO48, input, X)," &
	" 182 (BC_1, *, controlr, 1)," &
	" 183 (BC_1, IO50, output3, X, 182, 1, PULL1)," &
	" 184 (BC_1, IO50, input, X)," &
	" 185 (BC_1, *, controlr, 1)," &
	" 186 (BC_1, IO51, output3, X, 185, 1, PULL1)," &
	" 187 (BC_1, IO51, input, X)," &
	" 188 (BC_1, *, internal, X)," &
	" 189 (BC_1, *, internal, X)," &
	" 190 (BC_1, *, internal, X)," &
	" 191 (BC_1, *, internal, 1)," & -- IO53.T
	" 192 (BC_1, *, internal, X)," & -- IO53.O
	" 193 (BC_1, *, internal, X)," & -- IO53.I
	" 194 (BC_1, *, controlr, 1)," &
	" 195 (BC_1, IO56, output3, X, 194, 1, PULL1)," &
	" 196 (BC_1, IO56, input, X)," &
	" 197 (BC_1, *, controlr, 1)," &
	" 198 (BC_1, IO57, output3, X, 197, 1, PULL1)," &
	" 199 (BC_1, IO57, input, X)," &
	" 200 (BC_1, *, controlr, 1)," &
	" 201 (BC_1, IO59, output3, X, 200, 1, PULL1)," &
	" 202 (BC_1, IO59, input, X)," &
	" 203 (BC_1, *, controlr, 1)," &
	" 204 (BC_1, IO60, output3, X, 203, 1, PULL1)," &
	" 205 (BC_1, IO60, input, X)," &
	" 206 (BC_1, *, controlr, 1)," &
	" 207 (BC_1, IO61, output3, X, 206, 1, PULL1)," &
	" 208 (BC_1, IO61, input, X)," &
	" 209 (BC_1, *, controlr, 1)," &
	" 210 (BC_1, IO62, output3, X, 209, 1, PULL1)," &
	" 211 (BC_1, IO62, input, X)," &
	" 212 (BC_1, *, controlr, 1)," &
	" 213 (BC_1, IO63, output3, X, 212, 1, PULL1)," &
	" 214 (BC_1, IO63, input, X)," &
	" 215 (BC_1, *, controlr, 1)," &
	" 216 (BC_1, IO65, output3, X, 215, 1, PULL1)," &
	" 217 (BC_1, IO65, input, X)," &
	" 218 (BC_1, *, controlr, 1)," &
	" 219 (BC_1, IO69, output3, X, 218, 1, PULL1)," &
	" 220 (BC_1, IO69, input, X)," &
	" 221 (BC_1, *, controlr, 1)," &
	" 222 (BC_1, IO70, output3, X, 221, 1, PULL1)," &
	" 223 (BC_1, IO70, input, X)," &
	" 224 (BC_1, *, controlr, 1)," &
	" 225 (BC_1, IO71, output3, X, 224, 1, PULL1)," &
	" 226 (BC_1, IO71, input, X)," &
	" 227 (BC_1, *, controlr, 1)," &
	" 228 (BC_1, IO72, output3, X, 227, 1, PULL1)," &
	" 229 (BC_1, IO72, input, X)," &
	" 230 (BC_1, *, controlr, 1)," &
	" 231 (BC_1, IO73, output3, X, 230, 1, PULL1)," &
	" 232 (BC_1, IO73, input, X)," &
	" 233 (BC_1, *, controlr, 1)," &
	" 234 (BC_1, IO74, output3, X, 233, 1, PULL1)," &
	" 235 (BC_1, IO74, input, X)," &
	" 236 (BC_1, *, controlr, 1)," &
	" 237 (BC_1, IO76, output3, X, 236, 1, PULL1)," &
	" 238 (BC_1, IO76, input, X)," &
	" 239 (BC_1, *, controlr, 1)," &
	" 240 (BC_1, IO77, output3, X, 239, 1, PULL1)," &
	" 241 (BC_1, IO77, input, X)," &
	" 242 (BC_1, *, internal, 1)," & -- IO80.T
	" 243 (BC_1, *, internal, X)," & -- IO80.O
	" 244 (BC_1, *, internal, X)," & -- IO80.I
	" 245 (BC_1, *, controlr, 1)," &
	" 246 (BC_1, IO81, output3, X, 245, 1, PULL1)," &
	" 247 (BC_1, IO81, input, X)," &
	" 248 (BC_1, *, controlr, 1)," &
	" 249 (BC_1, IO82, output3, X, 248, 1, PULL1)," &
	" 250 (BC_1, IO82, input, X)," &
	" 251 (BC_1, *, controlr, 1)," &
	" 252 (BC_1, IO83, output3, X, 251, 1, PULL1)," &
	" 253 (BC_1, IO83, input, X)," &
	" 254 (BC_1, *, controlr, 1)," &
	" 255 (BC_1, IO85, output3, X, 254, 1, PULL1)," &
	" 256 (BC_1, IO85, input, X)," &
	" 257 (BC_1, *, controlr, 1)," &
	" 258 (BC_1, IO86, output3, X, 257, 1, PULL1)," &
	" 259 (BC_1, IO86, input, X)," &
	" 260 (BC_1, *, controlr, 1)," &
	" 261 (BC_1, IO87, output3, X, 260, 1, PULL1)," &
	" 262 (BC_1, IO87, input, X)," &
	" 263 (BC_1, *, controlr, 1)," &
	" 264 (BC_1, IO88, output3, X, 263, 1, PULL1)," &
	" 265 (BC_1, IO88, input, X)," &
	" 266 (BC_1, *, controlr, 1)," &
	" 267 (BC_1, IO89, output3, X, 266, 1, PULL1)," &
	" 268 (BC_1, IO89, input, X)," &
	" 269 (BC_1, *, controlr, 1)," &
	" 270 (BC_1, IO90, output3, X, 269, 1, PULL1)," &
	" 271 (BC_1, IO90, input, X)," &
	" 272 (BC_1, *, controlr, 1)," &
	" 273 (BC_1, IO93, output3, X, 272, 1, PULL1)," &
	" 274 (BC_1, IO93, input, X)," &
	" 275 (BC_1, *, controlr, 1)," &
	" 276 (BC_1, IO94, output3, X, 275, 1, PULL1)," &
	" 277 (BC_1, IO94, input, X)," &
	" 278 (BC_1, *, controlr, 1)," &
	" 279 (BC_1, IO95, output3, X, 278, 1, PULL1)," &
	" 280 (BC_1, IO95, input, X)," &
	" 281 (BC_1, *, controlr, 1)," &
	" 282 (BC_1, IO96, output3, X, 281, 1, PULL1)," &
	" 283 (BC_1, IO96, input, X)," &
	" 284 (BC_1, *, controlr, 1)," &
	" 285 (BC_1, IO97, output3, X, 284, 1, PULL1)," &
	" 286 (BC_1, IO97, input, X)," &
	" 287 (BC_1, *, controlr, 1)," &
	" 288 (BC_1, IO98, output3, X, 287, 1, PULL1)," &
	" 289 (BC_1, IO98, input, X)," &
	" 290 (BC_1, *, controlr, 1)," &
	" 291 (BC_1, M1, output3, X, 290, 1, PULL1)," &
	" 292 (BC_1, M1, input, X)," &
	" 293 (BC_1, M0, input, X)," &
	" 294 (BC_1, M2, input, X)," &
	" 295 (BC_1, *, controlr, 1)," &
	" 296 (BC_1, IO105, output3, X, 295, 1, PULL1)," &
	" 297 (BC_1, IO105, input, X)," &
	" 298 (BC_1, *, controlr, 1)," &
	" 299 (BC_1, IO106, output3, X, 298, 1, PULL1)," &
	" 300 (BC_1, IO106, input, X)," &
	" 301 (BC_1, *, controlr, 1)," &
	" 302 (BC_1, IO107, output3, X, 301, 1, PULL1)," &
	" 303 (BC_1, IO107, input, X)," &
	" 304 (BC_1, *, controlr, 1)," &
	" 305 (BC_1, IO108, output3, X, 304, 1, PULL1)," &
	" 306 (BC_1, IO108, input, X)," &
	" 307 (BC_1, *, controlr, 1)," &
	" 308 (BC_1, IO109, output3, X, 307, 1, PULL1)," &
	" 309 (BC_1, IO109, input, X)," &
	" 310 (BC_1, *, controlr, 1)," &
	" 311 (BC_1, IO110, output3, X, 310, 1, PULL1)," &
	" 312 (BC_1, IO110, input, X)," &
	" 313 (BC_1, *, controlr, 1)," &
	" 314 (BC_1, IO113, output3, X, 313, 1, PULL1)," &
	" 315 (BC_1, IO113, input, X)," &
	" 316 (BC_1, *, controlr, 1)," &
	" 317 (BC_1, IO114, output3, X, 316, 1, PULL1)," &
	" 318 (BC_1, IO114, input, X)," &
	" 319 (BC_1, *, controlr, 1)," &
	" 320 (BC_1, IO115, output3, X, 319, 1, PULL1)," &
	" 321 (BC_1, IO115, input, X)," &
	" 322 (BC_1, *, controlr, 1)," &
	" 323 (BC_1, IO116, output3, X, 322, 1, PULL1)," &
	" 324 (BC_1, IO116, input, X)," &
	" 325 (BC_1, *, controlr, 1)," &
	" 326 (BC_1, IO117, output3, X, 325, 1, PULL1)," &
	" 327 (BC_1, IO117, input, X)," &
	" 328 (BC_1, *, controlr, 1)," &
	" 329 (BC_1, IO118, output3, X, 328, 1, PULL1)," &
	" 330 (BC_1, IO118, input, X)," &
	" 331 (BC_1, *, controlr, 1)," &
	" 332 (BC_1, IO120, output3, X, 331, 1, PULL1)," &
	" 333 (BC_1, IO120, input, X)," &
	" 334 (BC_1, *, controlr, 1)," &
	" 335 (BC_1, IO121, output3, X, 334, 1, PULL1)," &
	" 336 (BC_1, IO121, input, X)," &
	" 337 (BC_1, *, controlr, 1)," &
	" 338 (BC_1, IO122, output3, X, 337, 1, PULL1)," &
	" 339 (BC_1, IO122, input, X)," &
	" 340 (BC_1, *, internal, 1)," & -- IO123.T
	" 341 (BC_1, *, internal, X)," & -- IO123.O
	" 342 (BC_1, *, internal, X)," & -- IO123.I
	" 343 (BC_1, *, controlr, 1)," &
	" 344 (BC_1, IO126, output3, X, 343, 1, PULL1)," &
	" 345 (BC_1, IO126, input, X)," &
	" 346 (BC_1, *, controlr, 1)," &
	" 347 (BC_1, IO127, output3, X, 346, 1, PULL1)," &
	" 348 (BC_1, IO127, input, X)," &
	" 349 (BC_1, *, controlr, 1)," &
	" 350 (BC_1, IO129, output3, X, 349, 1, PULL1)," &
	" 351 (BC_1, IO129, input, X)," &
	" 352 (BC_1, *, controlr, 1)," &
	" 353 (BC_1, IO130, output3, X, 352, 1, PULL1)," &
	" 354 (BC_1, IO130, input, X)," &
	" 355 (BC_1, *, controlr, 1)," &
	" 356 (BC_1, IO131, output3, X, 355, 1, PULL1)," &
	" 357 (BC_1, IO131, input, X)," &
	" 358 (BC_1, *, controlr, 1)," &
	" 359 (BC_1, IO132, output3, X, 358, 1, PULL1)," &
	" 360 (BC_1, IO132, input, X)," &
	" 361 (BC_1, *, controlr, 1)," &
	" 362 (BC_1, IO133, output3, X, 361, 1, PULL1)," &
	" 363 (BC_1, IO133, input, X)," &
-- INIT is not a compliance enable after configuration. For post-configuration
-- operation un-comment the next line and comment out the following line.
-- Repeat for registers 364 through 366.
-- 	" 364 (BC_1, *, controlr, 1)," &
	" 364 (BC_1, *, internal, 1)," & 
-- 	" 365 (BC_1, INIT, output3, X, 364, 1, PULL1)," &
	" 365 (BC_1, *, internal, 0)," & 
-- 	" 366 (BC_1, INIT, input, X)," &
	" 366 (BC_1, *, internal, X)," & 
	" 367 (BC_1, *, controlr, 1)," &
	" 368 (BC_1, IO137, output3, X, 367, 1, PULL1)," &
	" 369 (BC_1, IO137, input, X)," &
	" 370 (BC_1, *, controlr, 1)," &
	" 371 (BC_1, IO138, output3, X, 370, 1, PULL1)," &
	" 372 (BC_1, IO138, input, X)," &
	" 373 (BC_1, *, controlr, 1)," &
	" 374 (BC_1, IO139, output3, X, 373, 1, PULL1)," &
	" 375 (BC_1, IO139, input, X)," &
	" 376 (BC_1, *, controlr, 1)," &
	" 377 (BC_1, IO140, output3, X, 376, 1, PULL1)," &
	" 378 (BC_1, IO140, input, X)," &
	" 379 (BC_1, *, controlr, 1)," &
	" 380 (BC_1, IO141, output3, X, 379, 1, PULL1)," &
	" 381 (BC_1, IO141, input, X)," &
	" 382 (BC_1, *, controlr, 1)," &
	" 383 (BC_1, IO142, output3, X, 382, 1, PULL1)," &
	" 384 (BC_1, IO142, input, X)," &
	" 385 (BC_1, *, controlr, 1)," &
	" 386 (BC_1, IO144, output3, X, 385, 1, PULL1)," &
	" 387 (BC_1, IO144, input, X)," &
	" 388 (BC_1, *, controlr, 1)," &
	" 389 (BC_1, IO145, output3, X, 388, 1, PULL1)," &
	" 390 (BC_1, IO145, input, X)," &
	" 391 (BC_1, *, internal, 1)," & -- IO148.T
	" 392 (BC_1, *, internal, X)," & -- IO148.O
	" 393 (BC_1, *, internal, X)," & -- IO148.I
	" 394 (BC_1, *, controlr, 1)," &
	" 395 (BC_1, IO149, output3, X, 394, 1, PULL1)," &
	" 396 (BC_1, IO149, input, X)," &
	" 397 (BC_1, *, controlr, 1)," &
	" 398 (BC_1, IO150, output3, X, 397, 1, PULL1)," &
	" 399 (BC_1, IO150, input, X)," &
	" 400 (BC_1, *, controlr, 1)," &
	" 401 (BC_1, IO151, output3, X, 400, 1, PULL1)," &
	" 402 (BC_1, IO151, input, X)," &
	" 403 (BC_1, *, controlr, 1)," &
	" 404 (BC_1, IO153, output3, X, 403, 1, PULL1)," &
	" 405 (BC_1, IO153, input, X)," &
	" 406 (BC_1, *, controlr, 1)," &
	" 407 (BC_1, IO154, output3, X, 406, 1, PULL1)," &
	" 408 (BC_1, IO154, input, X)," &
	" 409 (BC_1, *, controlr, 1)," &
	" 410 (BC_1, IO155, output3, X, 409, 1, PULL1)," &
	" 411 (BC_1, IO155, input, X)," &
	" 412 (BC_1, *, controlr, 1)," &
	" 413 (BC_1, IO156, output3, X, 412, 1, PULL1)," &
	" 414 (BC_1, IO156, input, X)," &
	" 415 (BC_1, *, controlr, 1)," &
	" 416 (BC_1, IO157, output3, X, 415, 1, PULL1)," &
	" 417 (BC_1, IO157, input, X)," &
	" 418 (BC_1, *, controlr, 1)," &
	" 419 (BC_1, IO158, output3, X, 418, 1, PULL1)," &
	" 420 (BC_1, IO158, input, X)," &
	" 421 (BC_1, *, controlr, 1)," &
	" 422 (BC_1, IO161, output3, X, 421, 1, PULL1)," &
	" 423 (BC_1, IO161, input, X)," &
	" 424 (BC_1, *, controlr, 1)," &
	" 425 (BC_1, IO162, output3, X, 424, 1, PULL1)," &
	" 426 (BC_1, IO162, input, X)," &
	" 427 (BC_1, *, controlr, 1)," &
	" 428 (BC_1, IO163, output3, X, 427, 1, PULL1)," &
	" 429 (BC_1, IO163, input, X)," &
	" 430 (BC_1, *, controlr, 1)," &
	" 431 (BC_1, IO164, output3, X, 430, 1, PULL1)," &
	" 432 (BC_1, IO164, input, X)," &
	" 433 (BC_1, *, controlr, 1)," &
	" 434 (BC_1, IO165, output3, X, 433, 1, PULL1)," &
	" 435 (BC_1, IO165, input, X)," &
	" 436 (BC_1, *, controlr, 1)," &
	" 437 (BC_1, IO166, output3, X, 436, 1, PULL1)," &
	" 438 (BC_1, IO166, input, X)," &
	" 439 (BC_1, *, controlr, 1)," &
	" 440 (BC_1, IO172, output3, X, 439, 1, PULL1)," &
	" 441 (BC_1, IO172, input, X)," &
	" 442 (BC_1, *, controlr, 1)," &
	" 443 (BC_1, IO173, output3, X, 442, 1, PULL1)," &
	" 444 (BC_1, IO173, input, X)," &
	" 445 (BC_1, *, controlr, 1)," &
	" 446 (BC_1, IO174, output3, X, 445, 1, PULL1)," &
	" 447 (BC_1, IO174, input, X)," &
	" 448 (BC_1, *, controlr, 1)," &
	" 449 (BC_1, IO175, output3, X, 448, 1, PULL1)," &
	" 450 (BC_1, IO175, input, X)," &
	" 451 (BC_1, *, controlr, 1)," &
	" 452 (BC_1, IO176, output3, X, 451, 1, PULL1)," &
	" 453 (BC_1, IO176, input, X)," &
	" 454 (BC_1, *, controlr, 1)," &
	" 455 (BC_1, IO177, output3, X, 454, 1, PULL1)," &
	" 456 (BC_1, IO177, input, X)," &
	" 457 (BC_1, *, controlr, 1)," &
	" 458 (BC_1, IO180, output3, X, 457, 1, PULL1)," &
	" 459 (BC_1, IO180, input, X)," &
	" 460 (BC_1, *, controlr, 1)," &
	" 461 (BC_1, IO181, output3, X, 460, 1, PULL1)," &
	" 462 (BC_1, IO181, input, X)," &
	" 463 (BC_1, *, controlr, 1)," &
	" 464 (BC_1, IO182, output3, X, 463, 1, PULL1)," &
	" 465 (BC_1, IO182, input, X)," &
	" 466 (BC_1, *, controlr, 1)," &
	" 467 (BC_1, IO183, output3, X, 466, 1, PULL1)," &
	" 468 (BC_1, IO183, input, X)," &
	" 469 (BC_1, *, controlr, 1)," &
	" 470 (BC_1, IO184, output3, X, 469, 1, PULL1)," &
	" 471 (BC_1, IO184, input, X)," &
	" 472 (BC_1, *, controlr, 1)," &
	" 473 (BC_1, IO185, output3, X, 472, 1, PULL1)," &
	" 474 (BC_1, IO185, input, X)," &
	" 475 (BC_1, *, controlr, 1)," &
	" 476 (BC_1, IO187, output3, X, 475, 1, PULL1)," &
	" 477 (BC_1, IO187, input, X)," &
	" 478 (BC_1, *, controlr, 1)," &
	" 479 (BC_1, IO188, output3, X, 478, 1, PULL1)," &
	" 480 (BC_1, IO188, input, X)," &
	" 481 (BC_1, *, controlr, 1)," &
	" 482 (BC_1, IO189, output3, X, 481, 1, PULL1)," &
	" 483 (BC_1, IO189, input, X)," &
	" 484 (BC_1, *, internal, 1)," & -- IO190.T
	" 485 (BC_1, *, internal, X)," & -- IO190.O
	" 486 (BC_1, *, internal, X)," & -- IO190.I
	" 487 (BC_1, *, controlr, 1)," &
	" 488 (BC_1, IO193, output3, X, 487, 1, PULL1)," &
	" 489 (BC_1, IO193, input, X)," &
	" 490 (BC_1, *, controlr, 1)," &
	" 491 (BC_1, IO194, output3, X, 490, 1, PULL1)," &
	" 492 (BC_1, IO194, input, X)," &
	" 493 (BC_1, *, controlr, 1)," &
	" 494 (BC_1, IO196, output3, X, 493, 1, PULL1)," &
	" 495 (BC_1, IO196, input, X)," &
	" 496 (BC_1, *, controlr, 1)," &
	" 497 (BC_1, IO197, output3, X, 496, 1, PULL1)," &
	" 498 (BC_1, IO197, input, X)," &
	" 499 (BC_1, *, controlr, 1)," &
	" 500 (BC_1, IO198, output3, X, 499, 1, PULL1)," &
	" 501 (BC_1, IO198, input, X)," &
	" 502 (BC_1, *, controlr, 1)," &
	" 503 (BC_1, IO199, output3, X, 502, 1, PULL1)," &
	" 504 (BC_1, IO199, input, X)," &
	" 505 (BC_1, *, controlr, 1)," &
	" 506 (BC_1, IO200, output3, X, 505, 1, PULL1)," &
	" 507 (BC_1, IO200, input, X)," &
	" 508 (BC_1, *, controlr, 1)," &
	" 509 (BC_1, IO201, output3, X, 508, 1, PULL1)," &
	" 510 (BC_1, IO201, input, X)," &
	" 511 (BC_1, *, controlr, 1)," &
	" 512 (BC_1, IO204, output3, X, 511, 1, PULL1)," &
	" 513 (BC_1, IO204, input, X)," &
	" 514 (BC_1, *, controlr, 1)," &
	" 515 (BC_1, IO205, output3, X, 514, 1, PULL1)," &
	" 516 (BC_1, IO205, input, X)," &
	" 517 (BC_1, *, controlr, 1)," &
	" 518 (BC_1, IO206, output3, X, 517, 1, PULL1)," &
	" 519 (BC_1, IO206, input, X)," &
	" 520 (BC_1, *, controlr, 1)," &
	" 521 (BC_1, IO207, output3, X, 520, 1, PULL1)," &
	" 522 (BC_1, IO207, input, X)," &
	" 523 (BC_1, *, controlr, 1)," &
	" 524 (BC_1, IO208, output3, X, 523, 1, PULL1)," &
	" 525 (BC_1, IO208, input, X)," &
	" 526 (BC_1, *, controlr, 1)," &
	" 527 (BC_1, IO209, output3, X, 526, 1, PULL1)," &
	" 528 (BC_1, IO209, input, X)," &
	" 529 (BC_1, *, controlr, 1)," &
	" 530 (BC_1, IO211, output3, X, 529, 1, PULL1)," &
	" 531 (BC_1, IO211, input, X)," &
	" 532 (BC_1, *, controlr, 1)," &
	" 533 (BC_1, IO212, output3, X, 532, 1, PULL1)," &
	" 534 (BC_1, IO212, input, X)," &
	" 535 (BC_1, *, internal, 1)," & -- IO215.T
	" 536 (BC_1, *, internal, X)," & -- IO215.O
	" 537 (BC_1, *, internal, X)," & -- IO215.I
	" 538 (BC_1, *, controlr, 1)," &
	" 539 (BC_1, IO216, output3, X, 538, 1, PULL1)," &
	" 540 (BC_1, IO216, input, X)," &
	" 541 (BC_1, *, controlr, 1)," &
	" 542 (BC_1, IO217, output3, X, 541, 1, PULL1)," &
	" 543 (BC_1, IO217, input, X)," &
	" 544 (BC_1, *, controlr, 1)," &
	" 545 (BC_1, IO218, output3, X, 544, 1, PULL1)," &
	" 546 (BC_1, IO218, input, X)," &
	" 547 (BC_1, *, controlr, 1)," &
	" 548 (BC_1, IO220, output3, X, 547, 1, PULL1)," &
	" 549 (BC_1, IO220, input, X)," &
	" 550 (BC_1, *, controlr, 1)," &
	" 551 (BC_1, IO221, output3, X, 550, 1, PULL1)," &
	" 552 (BC_1, IO221, input, X)," &
	" 553 (BC_1, *, controlr, 1)," &
	" 554 (BC_1, IO222, output3, X, 553, 1, PULL1)," &
	" 555 (BC_1, IO222, input, X)," &
	" 556 (BC_1, *, controlr, 1)," &
	" 557 (BC_1, IO223, output3, X, 556, 1, PULL1)," &
	" 558 (BC_1, IO223, input, X)," &
	" 559 (BC_1, *, controlr, 1)," &
	" 560 (BC_1, IO224, output3, X, 559, 1, PULL1)," &
	" 561 (BC_1, IO224, input, X)," &
	" 562 (BC_1, *, controlr, 1)," &
	" 563 (BC_1, IO225, output3, X, 562, 1, PULL1)," &
	" 564 (BC_1, IO225, input, X)," &
	" 565 (BC_1, *, controlr, 1)," &
	" 566 (BC_1, IO228, output3, X, 565, 1, PULL1)," &
	" 567 (BC_1, IO228, input, X)," &
	" 568 (BC_1, *, controlr, 1)," &
	" 569 (BC_1, IO229, output3, X, 568, 1, PULL1)," &
	" 570 (BC_1, IO229, input, X)," &
	" 571 (BC_1, *, controlr, 1)," &
	" 572 (BC_1, IO230, output3, X, 571, 1, PULL1)," &
	" 573 (BC_1, IO230, input, X)," &
	" 574 (BC_1, *, controlr, 1)," &
	" 575 (BC_1, IO231, output3, X, 574, 1, PULL1)," &
	" 576 (BC_1, IO231, input, X)," &
	" 577 (BC_1, *, controlr, 1)," &
	" 578 (BC_1, IO232, output3, X, 577, 1, PULL1)," &
	" 579 (BC_1, IO232, input, X)," &
	" 580 (BC_1, *, controlr, 1)," &
	" 581 (BC_1, IO233, output3, X, 580, 1, PULL1)," &
	" 582 (BC_1, IO233, input, X)," &
	" 583 (BC_1, *, internal, X)";
--end boundary register

attribute DESIGN_WARNING of XC4013XLT_PQ240 : entity is
	"This is a preliminary BSDL file which has not been verified." &
	"CCLK and DONE are not represented in BOUNDARY_REGISTER." &
	"This BSDL file must be modified by the FPGA designer in order to" &
		"reflect post-configuration behavior (if any)." &
	"If INIT has been high or floating since power-on or the last" &
		"rising edge of PROGRAM, then the device may be in" &
		"configuration mode in which case this file is not valid." &
	"The output and tristate capture values are not valid until after" &
		"the device is configured." &
	"The fast output mux (where used) is not captured properly." &
	"The tristate control is not captured properly when GTS is activated." &
	"Some pins have both controlled and uncontrolled input paths.";

end XC4013XLT_PQ240;