BSDL Files Library for JTAG

The only free public library that contains thousands of BSDL (Boundary Scan Description Language) models to use with BScan/JTAG tools

BSDL model: XCV50E_PQ240

--$ XILINX$RCSfile: xcv50e_pq240.bsd,v $
--$ XILINX$Revision: 1.3 $
--
-- BSDL file for device XCV50E, package PQ240
-- Xilinx, Inc. $State: FINAL $ $Date: 2002-01-29 13:27:40-08 $
-- Generated by createBSDL 2.20
--
-- For technical support, contact Xilinx as follows: 
-- North America 1-800-255-7778 hotline@xilinx.com 
-- United Kingdom +44 870 7350 610 eurosupport@xilinx.com
-- France  (33) 1 3463 0100 eurosupport@xilinx.com
-- Germany  (49) 89 991 54930 eurosupport@xilinx.com
-- Japan  (81) 3-3297-9163 jhotline@xilinx.com
--

-- This BSDL file reflects the pre-configuration JTAG behavior. To reflect
-- the post-configuration JTAG behavior (if any), edit this file as described
-- below. Many of these changes are demonstrated by commented-out template
-- lines preceeding the lines they would replace:
--
-- 1. Enable USER instructions as appropriate (see below).
-- 2. Set disable result of all pads as configured.
-- 3. Set safe state of boundary cells as necessary.
-- 4. Rename entity if necessary to avoid name collisions.
-- 5. Modify USERCODE value in USERCODE_REGISTER declaration.
--
-- The boundary scan test vectors must keep the PROGRAM pin either 3-stated
-- or driving high. If the PROGRAM pin is driven low through any means,
-- the TAP controller will reset.
--
-- All IOBs prior to configuration, and unused and output-only IOBs following
-- configuration, will sense their pad values during boundary-scan with an LVTTL
-- input buffer. In order to properly capture a logic high value driven from one
-- of these IOBs into an input boundary scan cell, VCCO must be
-- at least 2V (Vih for LVTTL).
--
-- For post-configuration boundary scan only: If an IOB is configured to use
-- an input standard that uses VREF pins, then the boundary scan test vectors
-- must keep the used VREF pins 3-stated.
--
-- The disable result of a 3-stated I/O is set to PULL0 - the proper result
-- for configuration modes without the pre-configuration
-- pullups (M2,M1,M0 set to 000, 101, 110, or 111). If not in one of
-- these modes, all PULL0's should be PULL1's. Additionally, when in
-- EXTEST updating the values for M2, M1, and M0 will directly affect
-- the existence of the pre-configuration pullup.
-- It is therefore recommended to shift in the same mode being driven
-- externally when relying upon the disable result.

--
-- BSDL verified to conform to 1149.1b-1994 syntax. This device has been 
-- tested by the Intellitech 1149.1 Verification Lab using the Intellitech
-- Eclipse(TM) Scan Diagnostic Tool and the Intellitech RCT(TM). This
-- device has been verified to operate according to the BSDL provided,
-- and is compatible with the IEEE 1149.1 standard when the operating 
-- instructions in the BSDL are followed. 
-- PH: 603-868-7116 or email: scansupport@intellitech.com
-- November 29, 2000  JRG


entity XCV50E_PQ240 is

generic (PHYSICAL_PIN_MAP : string := "PQ240" );

port (
	CCLK_P179: inout bit;
	DONE_P120: inout bit;
	GCK0_P92: in bit;
	GCK1_P89: in bit;
	GCK2_P210: in bit;
	GCK3_P213: in bit;
	GND: linkage bit_vector (1 to 32);
	INIT_P123: inout bit; --  PAD96
	M0_P60: in bit;
	M1_P58: in bit;
	M2_P62: in bit;
	PROGRAM: in bit;
	TCK: in bit;
	TDI: in bit;
	TDO: out bit;
	TMS: in bit;
	VCCINT: linkage bit_vector (1 to 12);
	VCCO0: linkage bit_vector (1 to 3);
	VCCO1: linkage bit_vector (1 to 3);
	VCCO2: linkage bit_vector (1 to 3);
	VCCO3: linkage bit_vector (1 to 3);
	VCCO4: linkage bit_vector (1 to 3);
	VCCO5: linkage bit_vector (1 to 3);
	VCCO6: linkage bit_vector (1 to 3);
	VCCO7: linkage bit_vector (1 to 3);
	IO_P3: inout bit; --  PAD191
	IO_P4: inout bit; --  PAD190
	IO_P5: inout bit; --  PAD189
	IO_P6: inout bit; --  PAD188
	IO_P7: inout bit; --  PAD187
	IO_P9: inout bit; --  PAD186
	IO_P10: inout bit; --  PAD185
	IO_P11: inout bit; --  PAD183
	IO_P12: inout bit; --  PAD182
	IO_P13: inout bit; --  PAD181
	IO_P17: inout bit; --  PAD180
	IO_P18: inout bit; --  PAD179
	IO_P19: inout bit; --  PAD177
	IO_P20: inout bit; --  PAD176
	IO_P21: inout bit; --  PAD175
	IO_P23: inout bit; --  PAD174
	IO_P24: inout bit; --  PAD173
	IO_P26: inout bit; --  PAD171
	IO_P27: inout bit; --  PAD170
	IO_P28: inout bit; --  PAD169
	IO_P31: inout bit; --  PAD168
	IO_P33: inout bit; --  PAD166
	IO_P34: inout bit; --  PAD165
	IO_P35: inout bit; --  PAD164
	IO_P36: inout bit; --  PAD163
	IO_P38: inout bit; --  PAD162
	IO_P39: inout bit; --  PAD161
	IO_P40: inout bit; --  PAD160
	IO_P41: inout bit; --  PAD158
	IO_P42: inout bit; --  PAD157
	IO_P46: inout bit; --  PAD156
	IO_P47: inout bit; --  PAD155
	IO_P48: inout bit; --  PAD154
	IO_P49: inout bit; --  PAD152
	IO_P50: inout bit; --  PAD151
	IO_P52: inout bit; --  PAD150
	IO_P53: inout bit; --  PAD149
	IO_P54: inout bit; --  PAD148
	IO_P56: inout bit; --  PAD146
	IO_P57: inout bit; --  PAD145
	IO_P63: inout bit; --  PAD144
	IO_P64: inout bit; --  PAD143
	IO_P65: inout bit; --  PAD142
	IO_P66: inout bit; --  PAD141
	IO_P67: inout bit; --  PAD140
	IO_P68: inout bit; --  PAD139
	IO_P70: inout bit; --  PAD138
	IO_P71: inout bit; --  PAD137
	IO_P72: inout bit; --  PAD135
	IO_P73: inout bit; --  PAD134
	IO_P74: inout bit; --  PAD133
	IO_P78: inout bit; --  PAD132
	IO_P79: inout bit; --  PAD131
	IO_P80: inout bit; --  PAD129
	IO_P81: inout bit; --  PAD128
	IO_P82: inout bit; --  PAD127
	IO_P84: inout bit; --  PAD126
	IO_P86: inout bit; --  PAD124
	IO_P87: inout bit; --  PAD121
	IO_P93: inout bit; --  PAD120
	IO_P94: inout bit; --  PAD118
	IO_P95: inout bit; --  PAD117
	IO_P96: inout bit; --  PAD116
	IO_P97: inout bit; --  PAD115
	IO_P99: inout bit; --  PAD114
	IO_P100: inout bit; --  PAD113
	IO_P101: inout bit; --  PAD112
	IO_P102: inout bit; --  PAD110
	IO_P103: inout bit; --  PAD109
	IO_P107: inout bit; --  PAD108
	IO_P108: inout bit; --  PAD107
	IO_P109: inout bit; --  PAD106
	IO_P110: inout bit; --  PAD104
	IO_P111: inout bit; --  PAD103
	IO_P113: inout bit; --  PAD102
	IO_P114: inout bit; --  PAD101
	IO_P115: inout bit; --  PAD100
	IO_P117: inout bit; --  PAD98
	IO_P118: inout bit; --  PAD97
	IO_P124: inout bit; --  PAD95
	IO_P125: inout bit; --  PAD94
	IO_P126: inout bit; --  PAD93
	IO_P127: inout bit; --  PAD92
	IO_P128: inout bit; --  PAD91
	IO_P130: inout bit; --  PAD90
	IO_P131: inout bit; --  PAD89
	IO_P132: inout bit; --  PAD87
	IO_P133: inout bit; --  PAD86
	IO_P134: inout bit; --  PAD85
	IO_P138: inout bit; --  PAD84
	IO_P139: inout bit; --  PAD83
	IO_P140: inout bit; --  PAD81
	IO_P141: inout bit; --  PAD80
	IO_P142: inout bit; --  PAD79
	IO_P144: inout bit; --  PAD78
	IO_P145: inout bit; --  PAD77
	IO_P147: inout bit; --  PAD75
	IO_P149: inout bit; --  PAD73
	IO_P152: inout bit; --  PAD72
	IO_P153: inout bit; --  PAD71
	IO_P154: inout bit; --  PAD70
	IO_P155: inout bit; --  PAD69
	IO_P156: inout bit; --  PAD68
	IO_P157: inout bit; --  PAD67
	IO_P159: inout bit; --  PAD66
	IO_P160: inout bit; --  PAD65
	IO_P161: inout bit; --  PAD64
	IO_P162: inout bit; --  PAD62
	IO_P163: inout bit; --  PAD61
	IO_P167: inout bit; --  PAD60
	IO_P168: inout bit; --  PAD59
	IO_P169: inout bit; --  PAD58
	IO_P170: inout bit; --  PAD56
	IO_P171: inout bit; --  PAD55
	IO_P173: inout bit; --  PAD54
	IO_P174: inout bit; --  PAD53
	IO_P175: inout bit; --  PAD52
	IO_P177: inout bit; --  PAD50
	IO_P178: inout bit; --  PAD49
	IO_P184: inout bit; --  PAD48
	IO_P185: inout bit; --  PAD47
	IO_P186: inout bit; --  PAD46
	IO_P187: inout bit; --  PAD45
	IO_P188: inout bit; --  PAD44
	IO_P189: inout bit; --  PAD43
	IO_P191: inout bit; --  PAD42
	IO_P192: inout bit; --  PAD41
	IO_P193: inout bit; --  PAD39
	IO_P194: inout bit; --  PAD38
	IO_P195: inout bit; --  PAD37
	IO_P199: inout bit; --  PAD36
	IO_P200: inout bit; --  PAD35
	IO_P201: inout bit; --  PAD33
	IO_P202: inout bit; --  PAD32
	IO_P203: inout bit; --  PAD31
	IO_P205: inout bit; --  PAD30
	IO_P206: inout bit; --  PAD29
	IO_P208: inout bit; --  PAD27
	IO_P209: inout bit; --  PAD25
	IO_P215: inout bit; --  PAD24
	IO_P216: inout bit; --  PAD21
	IO_P217: inout bit; --  PAD20
	IO_P218: inout bit; --  PAD19
	IO_P220: inout bit; --  PAD18
	IO_P221: inout bit; --  PAD17
	IO_P222: inout bit; --  PAD16
	IO_P223: inout bit; --  PAD14
	IO_P224: inout bit; --  PAD13
	IO_P228: inout bit; --  PAD12
	IO_P229: inout bit; --  PAD11
	IO_P230: inout bit; --  PAD10
	IO_P231: inout bit; --  PAD7
	IO_P234: inout bit; --  PAD6
	IO_P235: inout bit; --  PAD5
	IO_P236: inout bit; --  PAD4
	IO_P237: inout bit; --  PAD3
	IO_P238: inout bit --  PAD2
); --end port list

use STD_1149_1_1994.all;

attribute COMPONENT_CONFORMANCE of XCV50E_PQ240 : entity is
	"STD_1149_1_1993";

attribute PIN_MAP of XCV50E_PQ240 : entity is PHYSICAL_PIN_MAP;

constant PQ240: PIN_MAP_STRING:=
	"CCLK_P179:P179," &
	"DONE_P120:P120," &
	"GCK0_P92:P92," &
	"GCK1_P89:P89," &
	"GCK2_P210:P210," &
	"GCK3_P213:P213," &
	"GND:(P1,P8,P14,P22,P29,P37,P45,P51,P59,P69," &
		"P75,P83,P91,P98,P106,P112,P119,P129,P135,P143," &
		"P151,P158,P166,P172,P182,P190,P196,P204,P211,P219," &
		"P227,P233)," &
	"INIT_P123:P123," &
	"M0_P60:P60," &
	"M1_P58:P58," &
	"M2_P62:P62," &
	"PROGRAM:P122," &
	"TCK:P239," &
	"TDI:P183," &
	"TDO:P181," &
	"TMS:P2," &
	"VCCINT:(P16,P32,P43,P77,P88,P104,P137,P148,P164,P198," &
		"P214,P225)," &
	"VCCO0:(P212,P226,P232)," &
	"VCCO1:(P180,P197,P207)," &
	"VCCO2:(P150,P165,P176)," &
	"VCCO3:(P121,P136,P146)," &
	"VCCO4:(P90,P105,P116)," &
	"VCCO5:(P61,P76,P85)," &
	"VCCO6:(P30,P44,P55)," &
	"VCCO7:(P15,P25,P240)," &
	"IO_P3:P3," &
	"IO_P4:P4," &
	"IO_P5:P5," &
	"IO_P6:P6," &
	"IO_P7:P7," &
	"IO_P9:P9," &
	"IO_P10:P10," &
	"IO_P11:P11," &
	"IO_P12:P12," &
	"IO_P13:P13," &
	"IO_P17:P17," &
	"IO_P18:P18," &
	"IO_P19:P19," &
	"IO_P20:P20," &
	"IO_P21:P21," &
	"IO_P23:P23," &
	"IO_P24:P24," &
	"IO_P26:P26," &
	"IO_P27:P27," &
	"IO_P28:P28," &
	"IO_P31:P31," &
	"IO_P33:P33," &
	"IO_P34:P34," &
	"IO_P35:P35," &
	"IO_P36:P36," &
	"IO_P38:P38," &
	"IO_P39:P39," &
	"IO_P40:P40," &
	"IO_P41:P41," &
	"IO_P42:P42," &
	"IO_P46:P46," &
	"IO_P47:P47," &
	"IO_P48:P48," &
	"IO_P49:P49," &
	"IO_P50:P50," &
	"IO_P52:P52," &
	"IO_P53:P53," &
	"IO_P54:P54," &
	"IO_P56:P56," &
	"IO_P57:P57," &
	"IO_P63:P63," &
	"IO_P64:P64," &
	"IO_P65:P65," &
	"IO_P66:P66," &
	"IO_P67:P67," &
	"IO_P68:P68," &
	"IO_P70:P70," &
	"IO_P71:P71," &
	"IO_P72:P72," &
	"IO_P73:P73," &
	"IO_P74:P74," &
	"IO_P78:P78," &
	"IO_P79:P79," &
	"IO_P80:P80," &
	"IO_P81:P81," &
	"IO_P82:P82," &
	"IO_P84:P84," &
	"IO_P86:P86," &
	"IO_P87:P87," &
	"IO_P93:P93," &
	"IO_P94:P94," &
	"IO_P95:P95," &
	"IO_P96:P96," &
	"IO_P97:P97," &
	"IO_P99:P99," &
	"IO_P100:P100," &
	"IO_P101:P101," &
	"IO_P102:P102," &
	"IO_P103:P103," &
	"IO_P107:P107," &
	"IO_P108:P108," &
	"IO_P109:P109," &
	"IO_P110:P110," &
	"IO_P111:P111," &
	"IO_P113:P113," &
	"IO_P114:P114," &
	"IO_P115:P115," &
	"IO_P117:P117," &
	"IO_P118:P118," &
	"IO_P124:P124," &
	"IO_P125:P125," &
	"IO_P126:P126," &
	"IO_P127:P127," &
	"IO_P128:P128," &
	"IO_P130:P130," &
	"IO_P131:P131," &
	"IO_P132:P132," &
	"IO_P133:P133," &
	"IO_P134:P134," &
	"IO_P138:P138," &
	"IO_P139:P139," &
	"IO_P140:P140," &
	"IO_P141:P141," &
	"IO_P142:P142," &
	"IO_P144:P144," &
	"IO_P145:P145," &
	"IO_P147:P147," &
	"IO_P149:P149," &
	"IO_P152:P152," &
	"IO_P153:P153," &
	"IO_P154:P154," &
	"IO_P155:P155," &
	"IO_P156:P156," &
	"IO_P157:P157," &
	"IO_P159:P159," &
	"IO_P160:P160," &
	"IO_P161:P161," &
	"IO_P162:P162," &
	"IO_P163:P163," &
	"IO_P167:P167," &
	"IO_P168:P168," &
	"IO_P169:P169," &
	"IO_P170:P170," &
	"IO_P171:P171," &
	"IO_P173:P173," &
	"IO_P174:P174," &
	"IO_P175:P175," &
	"IO_P177:P177," &
	"IO_P178:P178," &
	"IO_P184:P184," &
	"IO_P185:P185," &
	"IO_P186:P186," &
	"IO_P187:P187," &
	"IO_P188:P188," &
	"IO_P189:P189," &
	"IO_P191:P191," &
	"IO_P192:P192," &
	"IO_P193:P193," &
	"IO_P194:P194," &
	"IO_P195:P195," &
	"IO_P199:P199," &
	"IO_P200:P200," &
	"IO_P201:P201," &
	"IO_P202:P202," &
	"IO_P203:P203," &
	"IO_P205:P205," &
	"IO_P206:P206," &
	"IO_P208:P208," &
	"IO_P209:P209," &
	"IO_P215:P215," &
	"IO_P216:P216," &
	"IO_P217:P217," &
	"IO_P218:P218," &
	"IO_P220:P220," &
	"IO_P221:P221," &
	"IO_P222:P222," &
	"IO_P223:P223," &
	"IO_P224:P224," &
	"IO_P228:P228," &
	"IO_P229:P229," &
	"IO_P230:P230," &
	"IO_P231:P231," &
	"IO_P234:P234," &
	"IO_P235:P235," &
	"IO_P236:P236," &
	"IO_P237:P237," &
	"IO_P238:P238";


attribute TAP_SCAN_IN    of TDI : signal is true;
attribute TAP_SCAN_MODE  of TMS : signal is true;
attribute TAP_SCAN_OUT   of TDO : signal is true;

  

attribute TAP_SCAN_CLOCK of TCK : signal is (33.0e6, BOTH);



attribute COMPLIANCE_PATTERNS of XCV50E_PQ240 : entity is
        "(PROGRAM) (1)";

attribute INSTRUCTION_LENGTH of XCV50E_PQ240 : entity is 5;

attribute INSTRUCTION_OPCODE of XCV50E_PQ240 : entity is
	"SAMPLE (00001)," &
	"INTEST (00111)," &
	"USERCODE (01000)," &
	"IDCODE (01001)," &
	"HIGHZ (01010)," &
	"JSTART (01100)," & -- Not available during configuration with another mode.
	"RESERVED (00110)," &
	"CFG_OUT (00100)," & -- Not available during configuration with another mode.
	"CFG_IN (00101)," & -- Not available during configuration with another mode.
	"USER2 (00011)," & -- Not available until after configuration
	"USER1 (00010)," & -- Not available until after configuration
	"EXTEST (00000)," &
	"BYPASS (11111)";


attribute INSTRUCTION_CAPTURE of XCV50E_PQ240 : entity is "XXX01";
-- Bit 4 of instruction capture is CRC_ERROR (1 if a CRC error occurred)
-- Bit 3 indicates whether CRC register is non-zero (1 if non-zero)
-- Bit 2 is DONE.

  
-- If the device is configured, and a USER instruction is implemented
-- and not private to the FPGA designer, then it should be removed
-- from INSTRUCTION_PRIVATE, and the target register should be defined
-- in REGISTER_ACCESS.
 

 
attribute INSTRUCTION_PRIVATE of XCV50E_PQ240 : entity is
	"USER1," &
	"USER2," &
	"JSTART," &
	"CFG_IN," &
	"RESERVED," &
	"CFG_OUT";

 

 
attribute IDCODE_REGISTER of XCV50E_PQ240 : entity is
	"XXXX" &	-- version
	"0000101" &	-- family
	"000010000" &	-- array size
	"00001001001" &	-- manufacturer
	"1";		-- required by 1149.1

 

 
attribute USERCODE_REGISTER of XCV50E_PQ240 : entity is
	"XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX";
 

 
attribute REGISTER_ACCESS of XCV50E_PQ240 : entity is
--	"<reg_name>[<length>] (USER1)," &
--	"<reg_name>[<length>] (USER2)," &
	"BYPASS (HIGHZ,BYPASS)," &
	"DEVICE_ID (USERCODE,IDCODE)," &
	"BOUNDARY (SAMPLE,INTEST,EXTEST)";

 

attribute BOUNDARY_LENGTH of XCV50E_PQ240 : entity is 590;

attribute BOUNDARY_REGISTER of XCV50E_PQ240 : entity is
-- cellnum (type, port, function, safe[, ccell, disval, disrslt])
	"   0 (BC_1, *, controlr, 1)," &
	"   1 (BC_1, IO_P184, output3, X, 0, 1, PULL0)," & --  PAD48
	"   2 (BC_1, IO_P184, input, X)," & --  PAD48
	"   3 (BC_1, *, controlr, 1)," &
	"   4 (BC_1, IO_P185, output3, X, 3, 1, PULL0)," & --  PAD47
	"   5 (BC_1, IO_P185, input, X)," & --  PAD47
	"   6 (BC_1, *, controlr, 1)," &
	"   7 (BC_1, IO_P186, output3, X, 6, 1, PULL0)," & --  PAD46
	"   8 (BC_1, IO_P186, input, X)," & --  PAD46
	"   9 (BC_1, *, controlr, 1)," &
	"  10 (BC_1, IO_P187, output3, X, 9, 1, PULL0)," & --  PAD45
	"  11 (BC_1, IO_P187, input, X)," & --  PAD45
	"  12 (BC_1, *, controlr, 1)," &
	"  13 (BC_1, IO_P188, output3, X, 12, 1, PULL0)," & --  PAD44
	"  14 (BC_1, IO_P188, input, X)," & --  PAD44
	"  15 (BC_1, *, controlr, 1)," &
	"  16 (BC_1, IO_P189, output3, X, 15, 1, PULL0)," & --  PAD43
	"  17 (BC_1, IO_P189, input, X)," & --  PAD43
	"  18 (BC_1, *, controlr, 1)," &
	"  19 (BC_1, IO_P191, output3, X, 18, 1, PULL0)," & --  PAD42
	"  20 (BC_1, IO_P191, input, X)," & --  PAD42
	"  21 (BC_1, *, controlr, 1)," &
	"  22 (BC_1, IO_P192, output3, X, 21, 1, PULL0)," & --  PAD41
	"  23 (BC_1, IO_P192, input, X)," & --  PAD41
	"  24 (BC_1, *, internal, 1)," & -- PAD40.T
	"  25 (BC_1, *, internal, X)," & -- PAD40.O
	"  26 (BC_1, *, internal, X)," & -- PAD40.I
	"  27 (BC_1, *, controlr, 1)," &
	"  28 (BC_1, IO_P193, output3, X, 27, 1, PULL0)," & --  PAD39
	"  29 (BC_1, IO_P193, input, X)," & --  PAD39
	"  30 (BC_1, *, controlr, 1)," &
	"  31 (BC_1, IO_P194, output3, X, 30, 1, PULL0)," & --  PAD38
	"  32 (BC_1, IO_P194, input, X)," & --  PAD38
	"  33 (BC_1, *, controlr, 1)," &
	"  34 (BC_1, IO_P195, output3, X, 33, 1, PULL0)," & --  PAD37
	"  35 (BC_1, IO_P195, input, X)," & --  PAD37
	"  36 (BC_1, *, controlr, 1)," &
	"  37 (BC_1, IO_P199, output3, X, 36, 1, PULL0)," & --  PAD36
	"  38 (BC_1, IO_P199, input, X)," & --  PAD36
	"  39 (BC_1, *, controlr, 1)," &
	"  40 (BC_1, IO_P200, output3, X, 39, 1, PULL0)," & --  PAD35
	"  41 (BC_1, IO_P200, input, X)," & --  PAD35
	"  42 (BC_1, *, internal, 1)," & -- PAD34.T
	"  43 (BC_1, *, internal, X)," & -- PAD34.O
	"  44 (BC_1, *, internal, X)," & -- PAD34.I
	"  45 (BC_1, *, controlr, 1)," &
	"  46 (BC_1, IO_P201, output3, X, 45, 1, PULL0)," & --  PAD33
	"  47 (BC_1, IO_P201, input, X)," & --  PAD33
	"  48 (BC_1, *, controlr, 1)," &
	"  49 (BC_1, IO_P202, output3, X, 48, 1, PULL0)," & --  PAD32
	"  50 (BC_1, IO_P202, input, X)," & --  PAD32
	"  51 (BC_1, *, controlr, 1)," &
	"  52 (BC_1, IO_P203, output3, X, 51, 1, PULL0)," & --  PAD31
	"  53 (BC_1, IO_P203, input, X)," & --  PAD31
	"  54 (BC_1, *, controlr, 1)," &
	"  55 (BC_1, IO_P205, output3, X, 54, 1, PULL0)," & --  PAD30
	"  56 (BC_1, IO_P205, input, X)," & --  PAD30
	"  57 (BC_1, *, controlr, 1)," &
	"  58 (BC_1, IO_P206, output3, X, 57, 1, PULL0)," & --  PAD29
	"  59 (BC_1, IO_P206, input, X)," & --  PAD29
	"  60 (BC_1, *, internal, 1)," & -- PAD28.T
	"  61 (BC_1, *, internal, X)," & -- PAD28.O
	"  62 (BC_1, *, internal, X)," & -- PAD28.I
	"  63 (BC_1, *, controlr, 1)," &
	"  64 (BC_1, IO_P208, output3, X, 63, 1, PULL0)," & --  PAD27
	"  65 (BC_1, IO_P208, input, X)," & --  PAD27
	"  66 (BC_1, *, internal, X)," &
	"  67 (BC_1, *, internal, X)," &
	"  68 (BC_1, *, internal, X)," &
	"  69 (BC_1, *, controlr, 1)," &
	"  70 (BC_1, IO_P209, output3, X, 69, 1, PULL0)," & --  PAD25
	"  71 (BC_1, IO_P209, input, X)," & --  PAD25
	"  72 (BC_1, GCK2_P210, input, X)," &
	"  73 (BC_1, GCK3_P213, input, X)," &
	"  74 (BC_1, *, controlr, 1)," &
	"  75 (BC_1, IO_P215, output3, X, 74, 1, PULL0)," & --  PAD24
	"  76 (BC_1, IO_P215, input, X)," & --  PAD24
	"  77 (BC_1, *, internal, X)," &
	"  78 (BC_1, *, internal, X)," &
	"  79 (BC_1, *, internal, X)," &
	"  80 (BC_1, *, internal, X)," &
	"  81 (BC_1, *, internal, X)," &
	"  82 (BC_1, *, internal, X)," &
	"  83 (BC_1, *, controlr, 1)," &
	"  84 (BC_1, IO_P216, output3, X, 83, 1, PULL0)," & --  PAD21
	"  85 (BC_1, IO_P216, input, X)," & --  PAD21
	"  86 (BC_1, *, controlr, 1)," &
	"  87 (BC_1, IO_P217, output3, X, 86, 1, PULL0)," & --  PAD20
	"  88 (BC_1, IO_P217, input, X)," & --  PAD20
	"  89 (BC_1, *, controlr, 1)," &
	"  90 (BC_1, IO_P218, output3, X, 89, 1, PULL0)," & --  PAD19
	"  91 (BC_1, IO_P218, input, X)," & --  PAD19
	"  92 (BC_1, *, controlr, 1)," &
	"  93 (BC_1, IO_P220, output3, X, 92, 1, PULL0)," & --  PAD18
	"  94 (BC_1, IO_P220, input, X)," & --  PAD18
	"  95 (BC_1, *, controlr, 1)," &
	"  96 (BC_1, IO_P221, output3, X, 95, 1, PULL0)," & --  PAD17
	"  97 (BC_1, IO_P221, input, X)," & --  PAD17
	"  98 (BC_1, *, controlr, 1)," &
	"  99 (BC_1, IO_P222, output3, X, 98, 1, PULL0)," & --  PAD16
	" 100 (BC_1, IO_P222, input, X)," & --  PAD16
	" 101 (BC_1, *, internal, 1)," & -- PAD15.T
	" 102 (BC_1, *, internal, X)," & -- PAD15.O
	" 103 (BC_1, *, internal, X)," & -- PAD15.I
	" 104 (BC_1, *, controlr, 1)," &
	" 105 (BC_1, IO_P223, output3, X, 104, 1, PULL0)," & --  PAD14
	" 106 (BC_1, IO_P223, input, X)," & --  PAD14
	" 107 (BC_1, *, controlr, 1)," &
	" 108 (BC_1, IO_P224, output3, X, 107, 1, PULL0)," & --  PAD13
	" 109 (BC_1, IO_P224, input, X)," & --  PAD13
	" 110 (BC_1, *, controlr, 1)," &
	" 111 (BC_1, IO_P228, output3, X, 110, 1, PULL0)," & --  PAD12
	" 112 (BC_1, IO_P228, input, X)," & --  PAD12
	" 113 (BC_1, *, controlr, 1)," &
	" 114 (BC_1, IO_P229, output3, X, 113, 1, PULL0)," & --  PAD11
	" 115 (BC_1, IO_P229, input, X)," & --  PAD11
	" 116 (BC_1, *, controlr, 1)," &
	" 117 (BC_1, IO_P230, output3, X, 116, 1, PULL0)," & --  PAD10
	" 118 (BC_1, IO_P230, input, X)," & --  PAD10
	" 119 (BC_1, *, internal, 1)," & -- PAD9.T
	" 120 (BC_1, *, internal, X)," & -- PAD9.O
	" 121 (BC_1, *, internal, X)," & -- PAD9.I
	" 122 (BC_1, *, internal, 1)," & -- PAD8.T
	" 123 (BC_1, *, internal, X)," & -- PAD8.O
	" 124 (BC_1, *, internal, X)," & -- PAD8.I
	" 125 (BC_1, *, controlr, 1)," &
	" 126 (BC_1, IO_P231, output3, X, 125, 1, PULL0)," & --  PAD7
	" 127 (BC_1, IO_P231, input, X)," & --  PAD7
	" 128 (BC_1, *, controlr, 1)," &
	" 129 (BC_1, IO_P234, output3, X, 128, 1, PULL0)," & --  PAD6
	" 130 (BC_1, IO_P234, input, X)," & --  PAD6
	" 131 (BC_1, *, controlr, 1)," &
	" 132 (BC_1, IO_P235, output3, X, 131, 1, PULL0)," & --  PAD5
	" 133 (BC_1, IO_P235, input, X)," & --  PAD5
	" 134 (BC_1, *, controlr, 1)," &
	" 135 (BC_1, IO_P236, output3, X, 134, 1, PULL0)," & --  PAD4
	" 136 (BC_1, IO_P236, input, X)," & --  PAD4
	" 137 (BC_1, *, controlr, 1)," &
	" 138 (BC_1, IO_P237, output3, X, 137, 1, PULL0)," & --  PAD3
	" 139 (BC_1, IO_P237, input, X)," & --  PAD3
	" 140 (BC_1, *, controlr, 1)," &
	" 141 (BC_1, IO_P238, output3, X, 140, 1, PULL0)," & --  PAD2
	" 142 (BC_1, IO_P238, input, X)," & --  PAD2
	" 143 (BC_1, *, internal, X)," &
	" 144 (BC_1, *, internal, X)," &
	" 145 (BC_1, *, internal, X)," &
	" 146 (BC_1, *, internal, X)," &
	" 147 (BC_1, *, internal, X)," &
	" 148 (BC_1, *, internal, X)," &
	" 149 (BC_1, *, controlr, 1)," &
	" 150 (BC_1, IO_P3, output3, X, 149, 1, PULL0)," & --  PAD191
	" 151 (BC_1, IO_P3, input, X)," & --  PAD191
	" 152 (BC_1, *, controlr, 1)," &
	" 153 (BC_1, IO_P4, output3, X, 152, 1, PULL0)," & --  PAD190
	" 154 (BC_1, IO_P4, input, X)," & --  PAD190
	" 155 (BC_1, *, controlr, 1)," &
	" 156 (BC_1, IO_P5, output3, X, 155, 1, PULL0)," & --  PAD189
	" 157 (BC_1, IO_P5, input, X)," & --  PAD189
	" 158 (BC_1, *, controlr, 1)," &
	" 159 (BC_1, IO_P6, output3, X, 158, 1, PULL0)," & --  PAD188
	" 160 (BC_1, IO_P6, input, X)," & --  PAD188
	" 161 (BC_1, *, controlr, 1)," &
	" 162 (BC_1, IO_P7, output3, X, 161, 1, PULL0)," & --  PAD187
	" 163 (BC_1, IO_P7, input, X)," & --  PAD187
	" 164 (BC_1, *, controlr, 1)," &
	" 165 (BC_1, IO_P9, output3, X, 164, 1, PULL0)," & --  PAD186
	" 166 (BC_1, IO_P9, input, X)," & --  PAD186
	" 167 (BC_1, *, controlr, 1)," &
	" 168 (BC_1, IO_P10, output3, X, 167, 1, PULL0)," & --  PAD185
	" 169 (BC_1, IO_P10, input, X)," & --  PAD185
	" 170 (BC_1, *, internal, 1)," & -- PAD184.T
	" 171 (BC_1, *, internal, X)," & -- PAD184.O
	" 172 (BC_1, *, internal, X)," & -- PAD184.I
	" 173 (BC_1, *, controlr, 1)," &
	" 174 (BC_1, IO_P11, output3, X, 173, 1, PULL0)," & --  PAD183
	" 175 (BC_1, IO_P11, input, X)," & --  PAD183
	" 176 (BC_1, *, controlr, 1)," &
	" 177 (BC_1, IO_P12, output3, X, 176, 1, PULL0)," & --  PAD182
	" 178 (BC_1, IO_P12, input, X)," & --  PAD182
	" 179 (BC_1, *, controlr, 1)," &
	" 180 (BC_1, IO_P13, output3, X, 179, 1, PULL0)," & --  PAD181
	" 181 (BC_1, IO_P13, input, X)," & --  PAD181
	" 182 (BC_1, *, controlr, 1)," &
	" 183 (BC_1, IO_P17, output3, X, 182, 1, PULL0)," & --  PAD180
	" 184 (BC_1, IO_P17, input, X)," & --  PAD180
	" 185 (BC_1, *, controlr, 1)," &
	" 186 (BC_1, IO_P18, output3, X, 185, 1, PULL0)," & --  PAD179
	" 187 (BC_1, IO_P18, input, X)," & --  PAD179
	" 188 (BC_1, *, internal, 1)," & -- PAD178.T
	" 189 (BC_1, *, internal, X)," & -- PAD178.O
	" 190 (BC_1, *, internal, X)," & -- PAD178.I
	" 191 (BC_1, *, controlr, 1)," &
	" 192 (BC_1, IO_P19, output3, X, 191, 1, PULL0)," & --  PAD177
	" 193 (BC_1, IO_P19, input, X)," & --  PAD177
	" 194 (BC_1, *, controlr, 1)," &
	" 195 (BC_1, IO_P20, output3, X, 194, 1, PULL0)," & --  PAD176
	" 196 (BC_1, IO_P20, input, X)," & --  PAD176
	" 197 (BC_1, *, controlr, 1)," &
	" 198 (BC_1, IO_P21, output3, X, 197, 1, PULL0)," & --  PAD175
	" 199 (BC_1, IO_P21, input, X)," & --  PAD175
	" 200 (BC_1, *, controlr, 1)," &
	" 201 (BC_1, IO_P23, output3, X, 200, 1, PULL0)," & --  PAD174
	" 202 (BC_1, IO_P23, input, X)," & --  PAD174
	" 203 (BC_1, *, controlr, 1)," &
	" 204 (BC_1, IO_P24, output3, X, 203, 1, PULL0)," & --  PAD173
	" 205 (BC_1, IO_P24, input, X)," & --  PAD173
	" 206 (BC_1, *, internal, 1)," & -- PAD172.T
	" 207 (BC_1, *, internal, X)," & -- PAD172.O
	" 208 (BC_1, *, internal, X)," & -- PAD172.I
	" 209 (BC_1, *, controlr, 1)," &
	" 210 (BC_1, IO_P26, output3, X, 209, 1, PULL0)," & --  PAD171
	" 211 (BC_1, IO_P26, input, X)," & --  PAD171
	" 212 (BC_1, *, controlr, 1)," &
	" 213 (BC_1, IO_P27, output3, X, 212, 1, PULL0)," & --  PAD170
	" 214 (BC_1, IO_P27, input, X)," & --  PAD170
	" 215 (BC_1, *, controlr, 1)," &
	" 216 (BC_1, IO_P28, output3, X, 215, 1, PULL0)," & --  PAD169
	" 217 (BC_1, IO_P28, input, X)," & --  PAD169
	" 218 (BC_1, *, controlr, 1)," &
	" 219 (BC_1, IO_P31, output3, X, 218, 1, PULL0)," & --  PAD168
	" 220 (BC_1, IO_P31, input, X)," & --  PAD168
	" 221 (BC_1, *, internal, X)," &
	" 222 (BC_1, *, internal, X)," &
	" 223 (BC_1, *, internal, X)," &
	" 224 (BC_1, *, controlr, 1)," &
	" 225 (BC_1, IO_P33, output3, X, 224, 1, PULL0)," & --  PAD166
	" 226 (BC_1, IO_P33, input, X)," & --  PAD166
	" 227 (BC_1, *, controlr, 1)," &
	" 228 (BC_1, IO_P34, output3, X, 227, 1, PULL0)," & --  PAD165
	" 229 (BC_1, IO_P34, input, X)," & --  PAD165
	" 230 (BC_1, *, controlr, 1)," &
	" 231 (BC_1, IO_P35, output3, X, 230, 1, PULL0)," & --  PAD164
	" 232 (BC_1, IO_P35, input, X)," & --  PAD164
	" 233 (BC_1, *, controlr, 1)," &
	" 234 (BC_1, IO_P36, output3, X, 233, 1, PULL0)," & --  PAD163
	" 235 (BC_1, IO_P36, input, X)," & --  PAD163
	" 236 (BC_1, *, controlr, 1)," &
	" 237 (BC_1, IO_P38, output3, X, 236, 1, PULL0)," & --  PAD162
	" 238 (BC_1, IO_P38, input, X)," & --  PAD162
	" 239 (BC_1, *, controlr, 1)," &
	" 240 (BC_1, IO_P39, output3, X, 239, 1, PULL0)," & --  PAD161
	" 241 (BC_1, IO_P39, input, X)," & --  PAD161
	" 242 (BC_1, *, controlr, 1)," &
	" 243 (BC_1, IO_P40, output3, X, 242, 1, PULL0)," & --  PAD160
	" 244 (BC_1, IO_P40, input, X)," & --  PAD160
	" 245 (BC_1, *, internal, 1)," & -- PAD159.T
	" 246 (BC_1, *, internal, X)," & -- PAD159.O
	" 247 (BC_1, *, internal, X)," & -- PAD159.I
	" 248 (BC_1, *, controlr, 1)," &
	" 249 (BC_1, IO_P41, output3, X, 248, 1, PULL0)," & --  PAD158
	" 250 (BC_1, IO_P41, input, X)," & --  PAD158
	" 251 (BC_1, *, controlr, 1)," &
	" 252 (BC_1, IO_P42, output3, X, 251, 1, PULL0)," & --  PAD157
	" 253 (BC_1, IO_P42, input, X)," & --  PAD157
	" 254 (BC_1, *, controlr, 1)," &
	" 255 (BC_1, IO_P46, output3, X, 254, 1, PULL0)," & --  PAD156
	" 256 (BC_1, IO_P46, input, X)," & --  PAD156
	" 257 (BC_1, *, controlr, 1)," &
	" 258 (BC_1, IO_P47, output3, X, 257, 1, PULL0)," & --  PAD155
	" 259 (BC_1, IO_P47, input, X)," & --  PAD155
	" 260 (BC_1, *, controlr, 1)," &
	" 261 (BC_1, IO_P48, output3, X, 260, 1, PULL0)," & --  PAD154
	" 262 (BC_1, IO_P48, input, X)," & --  PAD154
	" 263 (BC_1, *, internal, 1)," & -- PAD153.T
	" 264 (BC_1, *, internal, X)," & -- PAD153.O
	" 265 (BC_1, *, internal, X)," & -- PAD153.I
	" 266 (BC_1, *, controlr, 1)," &
	" 267 (BC_1, IO_P49, output3, X, 266, 1, PULL0)," & --  PAD152
	" 268 (BC_1, IO_P49, input, X)," & --  PAD152
	" 269 (BC_1, *, controlr, 1)," &
	" 270 (BC_1, IO_P50, output3, X, 269, 1, PULL0)," & --  PAD151
	" 271 (BC_1, IO_P50, input, X)," & --  PAD151
	" 272 (BC_1, *, controlr, 1)," &
	" 273 (BC_1, IO_P52, output3, X, 272, 1, PULL0)," & --  PAD150
	" 274 (BC_1, IO_P52, input, X)," & --  PAD150
	" 275 (BC_1, *, controlr, 1)," &
	" 276 (BC_1, IO_P53, output3, X, 275, 1, PULL0)," & --  PAD149
	" 277 (BC_1, IO_P53, input, X)," & --  PAD149
	" 278 (BC_1, *, controlr, 1)," &
	" 279 (BC_1, IO_P54, output3, X, 278, 1, PULL0)," & --  PAD148
	" 280 (BC_1, IO_P54, input, X)," & --  PAD148
	" 281 (BC_1, *, internal, 1)," & -- PAD147.T
	" 282 (BC_1, *, internal, X)," & -- PAD147.O
	" 283 (BC_1, *, internal, X)," & -- PAD147.I
	" 284 (BC_1, *, controlr, 1)," &
	" 285 (BC_1, IO_P56, output3, X, 284, 1, PULL0)," & --  PAD146
	" 286 (BC_1, IO_P56, input, X)," & --  PAD146
	" 287 (BC_1, *, controlr, 1)," &
	" 288 (BC_1, IO_P57, output3, X, 287, 1, PULL0)," & --  PAD145
	" 289 (BC_1, IO_P57, input, X)," & --  PAD145
	" 290 (BC_1, M1_P58, input, X)," &
	" 291 (BC_1, M0_P60, input, X)," &
	" 292 (BC_1, M2_P62, input, X)," &
	" 293 (BC_1, *, controlr, 1)," &
	" 294 (BC_1, IO_P63, output3, X, 293, 1, PULL0)," & --  PAD144
	" 295 (BC_1, IO_P63, input, X)," & --  PAD144
	" 296 (BC_1, *, controlr, 1)," &
	" 297 (BC_1, IO_P64, output3, X, 296, 1, PULL0)," & --  PAD143
	" 298 (BC_1, IO_P64, input, X)," & --  PAD143
	" 299 (BC_1, *, controlr, 1)," &
	" 300 (BC_1, IO_P65, output3, X, 299, 1, PULL0)," & --  PAD142
	" 301 (BC_1, IO_P65, input, X)," & --  PAD142
	" 302 (BC_1, *, controlr, 1)," &
	" 303 (BC_1, IO_P66, output3, X, 302, 1, PULL0)," & --  PAD141
	" 304 (BC_1, IO_P66, input, X)," & --  PAD141
	" 305 (BC_1, *, controlr, 1)," &
	" 306 (BC_1, IO_P67, output3, X, 305, 1, PULL0)," & --  PAD140
	" 307 (BC_1, IO_P67, input, X)," & --  PAD140
	" 308 (BC_1, *, controlr, 1)," &
	" 309 (BC_1, IO_P68, output3, X, 308, 1, PULL0)," & --  PAD139
	" 310 (BC_1, IO_P68, input, X)," & --  PAD139
	" 311 (BC_1, *, controlr, 1)," &
	" 312 (BC_1, IO_P70, output3, X, 311, 1, PULL0)," & --  PAD138
	" 313 (BC_1, IO_P70, input, X)," & --  PAD138
	" 314 (BC_1, *, controlr, 1)," &
	" 315 (BC_1, IO_P71, output3, X, 314, 1, PULL0)," & --  PAD137
	" 316 (BC_1, IO_P71, input, X)," & --  PAD137
	" 317 (BC_1, *, internal, 1)," & -- PAD136.T
	" 318 (BC_1, *, internal, X)," & -- PAD136.O
	" 319 (BC_1, *, internal, X)," & -- PAD136.I
	" 320 (BC_1, *, controlr, 1)," &
	" 321 (BC_1, IO_P72, output3, X, 320, 1, PULL0)," & --  PAD135
	" 322 (BC_1, IO_P72, input, X)," & --  PAD135
	" 323 (BC_1, *, controlr, 1)," &
	" 324 (BC_1, IO_P73, output3, X, 323, 1, PULL0)," & --  PAD134
	" 325 (BC_1, IO_P73, input, X)," & --  PAD134
	" 326 (BC_1, *, controlr, 1)," &
	" 327 (BC_1, IO_P74, output3, X, 326, 1, PULL0)," & --  PAD133
	" 328 (BC_1, IO_P74, input, X)," & --  PAD133
	" 329 (BC_1, *, controlr, 1)," &
	" 330 (BC_1, IO_P78, output3, X, 329, 1, PULL0)," & --  PAD132
	" 331 (BC_1, IO_P78, input, X)," & --  PAD132
	" 332 (BC_1, *, controlr, 1)," &
	" 333 (BC_1, IO_P79, output3, X, 332, 1, PULL0)," & --  PAD131
	" 334 (BC_1, IO_P79, input, X)," & --  PAD131
	" 335 (BC_1, *, internal, 1)," & -- PAD130.T
	" 336 (BC_1, *, internal, X)," & -- PAD130.O
	" 337 (BC_1, *, internal, X)," & -- PAD130.I
	" 338 (BC_1, *, controlr, 1)," &
	" 339 (BC_1, IO_P80, output3, X, 338, 1, PULL0)," & --  PAD129
	" 340 (BC_1, IO_P80, input, X)," & --  PAD129
	" 341 (BC_1, *, controlr, 1)," &
	" 342 (BC_1, IO_P81, output3, X, 341, 1, PULL0)," & --  PAD128
	" 343 (BC_1, IO_P81, input, X)," & --  PAD128
	" 344 (BC_1, *, controlr, 1)," &
	" 345 (BC_1, IO_P82, output3, X, 344, 1, PULL0)," & --  PAD127
	" 346 (BC_1, IO_P82, input, X)," & --  PAD127
	" 347 (BC_1, *, controlr, 1)," &
	" 348 (BC_1, IO_P84, output3, X, 347, 1, PULL0)," & --  PAD126
	" 349 (BC_1, IO_P84, input, X)," & --  PAD126
	" 350 (BC_1, *, internal, 1)," & -- PAD125.T
	" 351 (BC_1, *, internal, X)," & -- PAD125.O
	" 352 (BC_1, *, internal, X)," & -- PAD125.I
	" 353 (BC_1, *, controlr, 1)," &
	" 354 (BC_1, IO_P86, output3, X, 353, 1, PULL0)," & --  PAD124
	" 355 (BC_1, IO_P86, input, X)," & --  PAD124
	" 356 (BC_1, *, internal, X)," &
	" 357 (BC_1, *, internal, X)," &
	" 358 (BC_1, *, internal, X)," &
	" 359 (BC_1, *, internal, X)," &
	" 360 (BC_1, *, internal, X)," &
	" 361 (BC_1, *, internal, X)," &
	" 362 (BC_1, *, controlr, 1)," &
	" 363 (BC_1, IO_P87, output3, X, 362, 1, PULL0)," & --  PAD121
	" 364 (BC_1, IO_P87, input, X)," & --  PAD121
	" 365 (BC_1, GCK1_P89, input, X)," &
	" 366 (BC_1, GCK0_P92, input, X)," &
	" 367 (BC_1, *, controlr, 1)," &
	" 368 (BC_1, IO_P93, output3, X, 367, 1, PULL0)," & --  PAD120
	" 369 (BC_1, IO_P93, input, X)," & --  PAD120
	" 370 (BC_1, *, internal, X)," &
	" 371 (BC_1, *, internal, X)," &
	" 372 (BC_1, *, internal, X)," &
	" 373 (BC_1, *, controlr, 1)," &
	" 374 (BC_1, IO_P94, output3, X, 373, 1, PULL0)," & --  PAD118
	" 375 (BC_1, IO_P94, input, X)," & --  PAD118
	" 376 (BC_1, *, controlr, 1)," &
	" 377 (BC_1, IO_P95, output3, X, 376, 1, PULL0)," & --  PAD117
	" 378 (BC_1, IO_P95, input, X)," & --  PAD117
	" 379 (BC_1, *, controlr, 1)," &
	" 380 (BC_1, IO_P96, output3, X, 379, 1, PULL0)," & --  PAD116
	" 381 (BC_1, IO_P96, input, X)," & --  PAD116
	" 382 (BC_1, *, controlr, 1)," &
	" 383 (BC_1, IO_P97, output3, X, 382, 1, PULL0)," & --  PAD115
	" 384 (BC_1, IO_P97, input, X)," & --  PAD115
	" 385 (BC_1, *, controlr, 1)," &
	" 386 (BC_1, IO_P99, output3, X, 385, 1, PULL0)," & --  PAD114
	" 387 (BC_1, IO_P99, input, X)," & --  PAD114
	" 388 (BC_1, *, controlr, 1)," &
	" 389 (BC_1, IO_P100, output3, X, 388, 1, PULL0)," & --  PAD113
	" 390 (BC_1, IO_P100, input, X)," & --  PAD113
	" 391 (BC_1, *, controlr, 1)," &
	" 392 (BC_1, IO_P101, output3, X, 391, 1, PULL0)," & --  PAD112
	" 393 (BC_1, IO_P101, input, X)," & --  PAD112
	" 394 (BC_1, *, internal, 1)," & -- PAD111.T
	" 395 (BC_1, *, internal, X)," & -- PAD111.O
	" 396 (BC_1, *, internal, X)," & -- PAD111.I
	" 397 (BC_1, *, controlr, 1)," &
	" 398 (BC_1, IO_P102, output3, X, 397, 1, PULL0)," & --  PAD110
	" 399 (BC_1, IO_P102, input, X)," & --  PAD110
	" 400 (BC_1, *, controlr, 1)," &
	" 401 (BC_1, IO_P103, output3, X, 400, 1, PULL0)," & --  PAD109
	" 402 (BC_1, IO_P103, input, X)," & --  PAD109
	" 403 (BC_1, *, controlr, 1)," &
	" 404 (BC_1, IO_P107, output3, X, 403, 1, PULL0)," & --  PAD108
	" 405 (BC_1, IO_P107, input, X)," & --  PAD108
	" 406 (BC_1, *, controlr, 1)," &
	" 407 (BC_1, IO_P108, output3, X, 406, 1, PULL0)," & --  PAD107
	" 408 (BC_1, IO_P108, input, X)," & --  PAD107
	" 409 (BC_1, *, controlr, 1)," &
	" 410 (BC_1, IO_P109, output3, X, 409, 1, PULL0)," & --  PAD106
	" 411 (BC_1, IO_P109, input, X)," & --  PAD106
	" 412 (BC_1, *, internal, 1)," & -- PAD105.T
	" 413 (BC_1, *, internal, X)," & -- PAD105.O
	" 414 (BC_1, *, internal, X)," & -- PAD105.I
	" 415 (BC_1, *, controlr, 1)," &
	" 416 (BC_1, IO_P110, output3, X, 415, 1, PULL0)," & --  PAD104
	" 417 (BC_1, IO_P110, input, X)," & --  PAD104
	" 418 (BC_1, *, controlr, 1)," &
	" 419 (BC_1, IO_P111, output3, X, 418, 1, PULL0)," & --  PAD103
	" 420 (BC_1, IO_P111, input, X)," & --  PAD103
	" 421 (BC_1, *, controlr, 1)," &
	" 422 (BC_1, IO_P113, output3, X, 421, 1, PULL0)," & --  PAD102
	" 423 (BC_1, IO_P113, input, X)," & --  PAD102
	" 424 (BC_1, *, controlr, 1)," &
	" 425 (BC_1, IO_P114, output3, X, 424, 1, PULL0)," & --  PAD101
	" 426 (BC_1, IO_P114, input, X)," & --  PAD101
	" 427 (BC_1, *, controlr, 1)," &
	" 428 (BC_1, IO_P115, output3, X, 427, 1, PULL0)," & --  PAD100
	" 429 (BC_1, IO_P115, input, X)," & --  PAD100
	" 430 (BC_1, *, internal, 1)," & -- PAD99.T
	" 431 (BC_1, *, internal, X)," & -- PAD99.O
	" 432 (BC_1, *, internal, X)," & -- PAD99.I
	" 433 (BC_1, *, controlr, 1)," &
	" 434 (BC_1, IO_P117, output3, X, 433, 1, PULL0)," & --  PAD98
	" 435 (BC_1, IO_P117, input, X)," & --  PAD98
	" 436 (BC_1, *, controlr, 1)," &
	" 437 (BC_1, IO_P118, output3, X, 436, 1, PULL0)," & --  PAD97
	" 438 (BC_1, IO_P118, input, X)," & --  PAD97
	" 439 (BC_1, *, controlr, 1)," &
	" 440 (BC_1, DONE_P120, output3, X, 439, 1, PULL1)," &
	" 441 (BC_1, DONE_P120, input, X)," &
	" 442 (BC_1, *, internal, 1)," & -- PROGRAM_B.I
	" 443 (BC_1, *, controlr, 1)," &
	" 444 (BC_1, INIT_P123, output3, X, 443, 1, PULL1)," & --  PAD96
	" 445 (BC_1, INIT_P123, input, X)," & --  PAD96
	" 446 (BC_1, *, controlr, 1)," &
	" 447 (BC_1, IO_P124, output3, X, 446, 1, PULL0)," & --  PAD95
	" 448 (BC_1, IO_P124, input, X)," & --  PAD95
	" 449 (BC_1, *, controlr, 1)," &
	" 450 (BC_1, IO_P125, output3, X, 449, 1, PULL0)," & --  PAD94
	" 451 (BC_1, IO_P125, input, X)," & --  PAD94
	" 452 (BC_1, *, controlr, 1)," &
	" 453 (BC_1, IO_P126, output3, X, 452, 1, PULL0)," & --  PAD93
	" 454 (BC_1, IO_P126, input, X)," & --  PAD93
	" 455 (BC_1, *, controlr, 1)," &
	" 456 (BC_1, IO_P127, output3, X, 455, 1, PULL0)," & --  PAD92
	" 457 (BC_1, IO_P127, input, X)," & --  PAD92
	" 458 (BC_1, *, controlr, 1)," &
	" 459 (BC_1, IO_P128, output3, X, 458, 1, PULL0)," & --  PAD91
	" 460 (BC_1, IO_P128, input, X)," & --  PAD91
	" 461 (BC_1, *, controlr, 1)," &
	" 462 (BC_1, IO_P130, output3, X, 461, 1, PULL0)," & --  PAD90
	" 463 (BC_1, IO_P130, input, X)," & --  PAD90
	" 464 (BC_1, *, controlr, 1)," &
	" 465 (BC_1, IO_P131, output3, X, 464, 1, PULL0)," & --  PAD89
	" 466 (BC_1, IO_P131, input, X)," & --  PAD89
	" 467 (BC_1, *, internal, 1)," & -- PAD88.T
	" 468 (BC_1, *, internal, X)," & -- PAD88.O
	" 469 (BC_1, *, internal, X)," & -- PAD88.I
	" 470 (BC_1, *, controlr, 1)," &
	" 471 (BC_1, IO_P132, output3, X, 470, 1, PULL0)," & --  PAD87
	" 472 (BC_1, IO_P132, input, X)," & --  PAD87
	" 473 (BC_1, *, controlr, 1)," &
	" 474 (BC_1, IO_P133, output3, X, 473, 1, PULL0)," & --  PAD86
	" 475 (BC_1, IO_P133, input, X)," & --  PAD86
	" 476 (BC_1, *, controlr, 1)," &
	" 477 (BC_1, IO_P134, output3, X, 476, 1, PULL0)," & --  PAD85
	" 478 (BC_1, IO_P134, input, X)," & --  PAD85
	" 479 (BC_1, *, controlr, 1)," &
	" 480 (BC_1, IO_P138, output3, X, 479, 1, PULL0)," & --  PAD84
	" 481 (BC_1, IO_P138, input, X)," & --  PAD84
	" 482 (BC_1, *, controlr, 1)," &
	" 483 (BC_1, IO_P139, output3, X, 482, 1, PULL0)," & --  PAD83
	" 484 (BC_1, IO_P139, input, X)," & --  PAD83
	" 485 (BC_1, *, internal, 1)," & -- PAD82.T
	" 486 (BC_1, *, internal, X)," & -- PAD82.O
	" 487 (BC_1, *, internal, X)," & -- PAD82.I
	" 488 (BC_1, *, controlr, 1)," &
	" 489 (BC_1, IO_P140, output3, X, 488, 1, PULL0)," & --  PAD81
	" 490 (BC_1, IO_P140, input, X)," & --  PAD81
	" 491 (BC_1, *, controlr, 1)," &
	" 492 (BC_1, IO_P141, output3, X, 491, 1, PULL0)," & --  PAD80
	" 493 (BC_1, IO_P141, input, X)," & --  PAD80
	" 494 (BC_1, *, controlr, 1)," &
	" 495 (BC_1, IO_P142, output3, X, 494, 1, PULL0)," & --  PAD79
	" 496 (BC_1, IO_P142, input, X)," & --  PAD79
	" 497 (BC_1, *, controlr, 1)," &
	" 498 (BC_1, IO_P144, output3, X, 497, 1, PULL0)," & --  PAD78
	" 499 (BC_1, IO_P144, input, X)," & --  PAD78
	" 500 (BC_1, *, controlr, 1)," &
	" 501 (BC_1, IO_P145, output3, X, 500, 1, PULL0)," & --  PAD77
	" 502 (BC_1, IO_P145, input, X)," & --  PAD77
	" 503 (BC_1, *, internal, 1)," & -- PAD76.T
	" 504 (BC_1, *, internal, X)," & -- PAD76.O
	" 505 (BC_1, *, internal, X)," & -- PAD76.I
	" 506 (BC_1, *, controlr, 1)," &
	" 507 (BC_1, IO_P147, output3, X, 506, 1, PULL0)," & --  PAD75
	" 508 (BC_1, IO_P147, input, X)," & --  PAD75
	" 509 (BC_1, *, internal, X)," &
	" 510 (BC_1, *, internal, X)," &
	" 511 (BC_1, *, internal, X)," &
	" 512 (BC_1, *, controlr, 1)," &
	" 513 (BC_1, IO_P149, output3, X, 512, 1, PULL0)," & --  PAD73
	" 514 (BC_1, IO_P149, input, X)," & --  PAD73
	" 515 (BC_1, *, controlr, 1)," &
	" 516 (BC_1, IO_P152, output3, X, 515, 1, PULL0)," & --  PAD72
	" 517 (BC_1, IO_P152, input, X)," & --  PAD72
	" 518 (BC_1, *, controlr, 1)," &
	" 519 (BC_1, IO_P153, output3, X, 518, 1, PULL0)," & --  PAD71
	" 520 (BC_1, IO_P153, input, X)," & --  PAD71
	" 521 (BC_1, *, controlr, 1)," &
	" 522 (BC_1, IO_P154, output3, X, 521, 1, PULL0)," & --  PAD70
	" 523 (BC_1, IO_P154, input, X)," & --  PAD70
	" 524 (BC_1, *, controlr, 1)," &
	" 525 (BC_1, IO_P155, output3, X, 524, 1, PULL0)," & --  PAD69
	" 526 (BC_1, IO_P155, input, X)," & --  PAD69
	" 527 (BC_1, *, controlr, 1)," &
	" 528 (BC_1, IO_P156, output3, X, 527, 1, PULL0)," & --  PAD68
	" 529 (BC_1, IO_P156, input, X)," & --  PAD68
	" 530 (BC_1, *, controlr, 1)," &
	" 531 (BC_1, IO_P157, output3, X, 530, 1, PULL0)," & --  PAD67
	" 532 (BC_1, IO_P157, input, X)," & --  PAD67
	" 533 (BC_1, *, controlr, 1)," &
	" 534 (BC_1, IO_P159, output3, X, 533, 1, PULL0)," & --  PAD66
	" 535 (BC_1, IO_P159, input, X)," & --  PAD66
	" 536 (BC_1, *, controlr, 1)," &
	" 537 (BC_1, IO_P160, output3, X, 536, 1, PULL0)," & --  PAD65
	" 538 (BC_1, IO_P160, input, X)," & --  PAD65
	" 539 (BC_1, *, controlr, 1)," &
	" 540 (BC_1, IO_P161, output3, X, 539, 1, PULL0)," & --  PAD64
	" 541 (BC_1, IO_P161, input, X)," & --  PAD64
	" 542 (BC_1, *, internal, 1)," & -- PAD63.T
	" 543 (BC_1, *, internal, X)," & -- PAD63.O
	" 544 (BC_1, *, internal, X)," & -- PAD63.I
	" 545 (BC_1, *, controlr, 1)," &
	" 546 (BC_1, IO_P162, output3, X, 545, 1, PULL0)," & --  PAD62
	" 547 (BC_1, IO_P162, input, X)," & --  PAD62
	" 548 (BC_1, *, controlr, 1)," &
	" 549 (BC_1, IO_P163, output3, X, 548, 1, PULL0)," & --  PAD61
	" 550 (BC_1, IO_P163, input, X)," & --  PAD61
	" 551 (BC_1, *, controlr, 1)," &
	" 552 (BC_1, IO_P167, output3, X, 551, 1, PULL0)," & --  PAD60
	" 553 (BC_1, IO_P167, input, X)," & --  PAD60
	" 554 (BC_1, *, controlr, 1)," &
	" 555 (BC_1, IO_P168, output3, X, 554, 1, PULL0)," & --  PAD59
	" 556 (BC_1, IO_P168, input, X)," & --  PAD59
	" 557 (BC_1, *, controlr, 1)," &
	" 558 (BC_1, IO_P169, output3, X, 557, 1, PULL0)," & --  PAD58
	" 559 (BC_1, IO_P169, input, X)," & --  PAD58
	" 560 (BC_1, *, internal, 1)," & -- PAD57.T
	" 561 (BC_1, *, internal, X)," & -- PAD57.O
	" 562 (BC_1, *, internal, X)," & -- PAD57.I
	" 563 (BC_1, *, controlr, 1)," &
	" 564 (BC_1, IO_P170, output3, X, 563, 1, PULL0)," & --  PAD56
	" 565 (BC_1, IO_P170, input, X)," & --  PAD56
	" 566 (BC_1, *, controlr, 1)," &
	" 567 (BC_1, IO_P171, output3, X, 566, 1, PULL0)," & --  PAD55
	" 568 (BC_1, IO_P171, input, X)," & --  PAD55
	" 569 (BC_1, *, controlr, 1)," &
	" 570 (BC_1, IO_P173, output3, X, 569, 1, PULL0)," & --  PAD54
	" 571 (BC_1, IO_P173, input, X)," & --  PAD54
	" 572 (BC_1, *, controlr, 1)," &
	" 573 (BC_1, IO_P174, output3, X, 572, 1, PULL0)," & --  PAD53
	" 574 (BC_1, IO_P174, input, X)," & --  PAD53
	" 575 (BC_1, *, controlr, 1)," &
	" 576 (BC_1, IO_P175, output3, X, 575, 1, PULL0)," & --  PAD52
	" 577 (BC_1, IO_P175, input, X)," & --  PAD52
	" 578 (BC_1, *, internal, 1)," & -- PAD51.T
	" 579 (BC_1, *, internal, X)," & -- PAD51.O
	" 580 (BC_1, *, internal, X)," & -- PAD51.I
	" 581 (BC_1, *, controlr, 1)," &
	" 582 (BC_1, IO_P177, output3, X, 581, 1, PULL0)," & --  PAD50
	" 583 (BC_1, IO_P177, input, X)," & --  PAD50
	" 584 (BC_1, *, controlr, 1)," &
	" 585 (BC_1, IO_P178, output3, X, 584, 1, PULL0)," & --  PAD49
	" 586 (BC_1, IO_P178, input, X)," & --  PAD49
	" 587 (BC_1, *, controlr, 1)," &
	" 588 (BC_1, CCLK_P179, output3, X, 587, 1, PULL1)," &
	" 589 (BC_1, CCLK_P179, input, X)";

	
attribute DESIGN_WARNING of XCV50E_PQ240 : entity is
      "This BSDL file must be modified by the FPGA designer in order to" &
                "reflect post-configuration behavior (if any)." &
        "The boundary scan test vectors must keep the PROGRAM pin" &
                "either 3-stated or driving high.  If the PROGRAM pin" &
                "is driven low through any means, the TAP controller" &
                "will reset." &
        "The disable result of a 3-stated I/O in this file" &
                "correspond with configuration mode pin settings without" &
                "pre-configuration pull-up resistors.  For the" &
                "modes with pull-up resistors, change PULL0 to PULL1." &
        "In EXTEST, the determination of whether this is" &
                "a pull-up configuration mode depends upon the values" &
                "shifted in and updated for the mode pin register cells." &
        "In EXTEST, output and tristate values are not captured in the" &
                "Capture-DR state - those register cells are unchanged." &
        "In INTEST, the pin input values are not captured in the" &
                "Capture-DR state - those register cells are unchanged." &
        "The output and tristate capture values are not valid until after" &
                "the device is configured." &
        "The tristate control is not captured properly when" &
                "GTS is activated.";

end XCV50E_PQ240;