-- *************************************************************
-- Copyright (C) 2004 Cypress Semiconductor Corporation.
--
-- All rights reserved. This Software and associated documentation are
-- owned by Cypress Semiconductor Incorporated, and may be used only
-- as authorized in the license agreement controlling such use. No part of
-- this publication may be reproduced, transmitted, modified,
-- distributed, displayed or translated, in any form or by any means,
-- electronic, mechanical, manual, optical, or otherwise, without prior
-- written permission of Cypress Semiconductor Incorporated, or as
-- expressly provided by the license agreement. Authorized users agree
-- to be bound by the Destination Control Statement and Disclaimer
-- notice below.
--
-- Destination Control Statement
-- All technical data contained in this publication is subject to the
-- export control laws of the United States of America. Disclosure to
-- nationals of other countries contrary to United States law is
-- prohibited. It is the reader's responsibility to determine the
-- applicable regulations and to comply with them.
--
-- Disclaimer
-- Cypress Semiconductor Corporation, makes no warranty of any kind,
-- express or implied, with regard to this material, including, but not
-- limited to, the implied warranties of merchantability and fitness
-- for a particular purpose. Cypress Semiconductor Incorporated,
-- reserves the right to make changes without further notice to the
-- materials described herein. Cypress Semiconductor Incorporated does
-- not assume any liability arising out of the application or use of
-- any product or circuit described herein. The Cypress Semiconductor
-- Incorporated products described herein are not authorized for use
-- as components in life-support devices.
--
-- end Copyright Notice
--
-- *************************************************************
-- *************************************************************
-- File : FLEX18_BASE4.bsd
-- Part Numbers: CY7C0833V-*BB*
-- Date : September 14, 2004
-- Revision : 1.00 - Initial Revision
-- Usage Notes: This BSDL file describes the JTAG circuitry for one
-- component of the device. Please refer to
-- the application note "FLEx72_JTAG.pdf" for more
-- information.
--
-- The MRSTb pin of the device resets both the system
-- logic and JTAG logic and should be treated as a
-- compliance enable pin and forced high during JTAG
-- testing.
--
-- The TAP controller is not fully compliant andshould
-- not be allowed to enter the Pause-DR or Pause-IR
-- states and then returned to Shift-DR and Shift-IR
-- respectively.
-- *************************************************************
entity FLEX18_BASE4 is
GENERIC (PHYSICAL_PIN_MAP : string := "UNDEFINED");
PORT (
la : INOUT bit_vector(17 DOWNTO 0);
ladsb: IN bit;
lce0b: IN bit;
lce1: IN bit;
lclk : IN bit;
lcntenb: IN bit;
lcntrstb: IN bit;
lcntmsk: IN bit;
ldq: INOUT bit_vector(35 DOWNTO 18);
loeb : IN bit;
lintb: OUT bit;
lcntintb: OUT bit;
lrw : IN bit;
lbb : IN bit_vector(3 DOWNTO 2);
ra : INOUT bit_vector(17 DOWNTO 0);
radsb: IN bit;
rce0b: IN bit;
rce1 : IN bit;
rclk : IN bit;
rcntenb: IN bit;
rcntrstb: IN bit;
rcntmsk: IN bit;
rdq: INOUT bit_vector(35 DOWNTO 18);
roeb : IN bit;
rintb: OUT bit;
rcntintb: OUT bit;
rrw : IN bit;
rbb : IN bit_vector(3 DOWNTO 2);
mrstb: IN bit;
TMS : IN bit;
TDI : IN bit;
TDO : OUT bit;
TCK : IN bit;
vdd : linkage bit_vector(33 DOWNTO 0);
vss : linkage bit_vector(36 DOWNTO 0);
NC : linkage bit_vector(46 DOWNTO 0)
);
use STD_1149_1_1994.all;
attribute COMPONENT_CONFORMANCE of FLEX18_BASE4 :
entity is "STD_1149_1_1993";
attribute PIN_MAP of FLEX18_BASE4 : entity is PHYSICAL_PIN_MAP;
constant UNDEFINED : PIN_MAP_STRING :=
"la: (57, 56, 55, 54, 53, 48, 47, 46, 45," &
" 44, 16, 15, 14, 13, 8, 7, 6, 5)," &
"ladsb: 40," &
"lce0b: 23," &
"lce1: 19," &
"lclk: 38," &
"lcntenb: 41," &
"lcntrstb: 42," &
"lcntmsk: 43," &
"ldq: (3, 2, 1, 220, 219, 214, 212, 213, 211," &
" 60, 68, 58, 61, 62, 67, 59, 69, 70)," &
"loeb: 22," &
"lintb: 210," &
"lcntintb: 209," &
"lrw: 37," &
"lbb: (21, 20)," &
"ra: (114, 115, 116, 117, 118, 123, 124, 125, 126," &
" 127, 155, 156, 157, 158, 163, 164, 165, 166)," &
"radsb: 131," &
"rce0b: 148," &
"rce1: 152," &
"rclk: 133," &
"rcntenb: 130," &
"rcntrstb: 129," &
"rcntmsk: 128," &
"rdq: (168, 169, 170, 171, 172, 177, 179, 178, 180," &
" 111, 103, 113, 110, 109, 104, 112, 102, 101)," &
"roeb: 149," &
"rintb: 181," &
"rcntintb: 182," &
"rrw: 134," &
"rbb: (150, 151)," &
"mrstb: 132," &
"TMS: 99," &
"TDI: 71," &
"TDO: 72," &
"TCK: 100," &
"vss: (9, 10, 31, 32, 33, 34, 35, 36, 39, 49, 50, 65, 66, 78, 79," &
" 92, 93, 105, 106, 161, 162, 121, 122, 135, 136, 137, 138," &
" 139, 140, 175, 176, 188, 189, 202, 203, 215, 216)," &
"vdd: (11, 12, 26, 27, 28, 29, 30, 51, 52, 63, 64, 80, 81, 90, 91," &
" 107, 108, 119, 120, 141, 142, 143, 144, 145, 159, 160, 173," &
" 174, 190, 191, 200, 201, 217, 218)," &
"NC: (4, 17, 18, 24, 25, 73, 74, 75, 76, 77, 82, 83, 84, 85, 86," &
" 87, 88, 89, 94, 95, 96, 97, 98, 146, 147, 153, 154, 167," &
" 183, 184, 185, 186, 187, 192, 193, 194, 195, 196, 197, 198," &
" 199, 204, 205, 206, 207, 208)";
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (10.00e6,BOTH);
attribute COMPLIANCE_PATTERNS of FLEX18_BASE4 : entity is
"(mrstb) (1)";
attribute INSTRUCTION_LENGTH of FLEX18_BASE4 : entity is 4;
attribute INSTRUCTION_OPCODE of FLEX18_BASE4 : entity is
"EXTEST (0000),"&
"BYPASS (1111),"&
"IDCODE (1011),"&
"HIGHZ (0111),"&
"CLAMP (0100),"&
"NBSRST (1100),"&
"SAMPLE (1000)";
attribute INSTRUCTION_CAPTURE of FLEX18_BASE4 : entity is "0001";
attribute IDCODE_REGISTER of FLEX18_BASE4 : entity is
"0000"& --4-bit Version
"1100000000000010"& --16-bit Part Number (hex C002)
"00000110100"& --11-bit Manufacturer's Identity (hex 034)
"1"; --Mandatory LSB
attribute REGISTER_ACCESS of FLEX18_BASE4 : entity is
"BOUNDARY (EXTEST,SAMPLE),"&
"BYPASS (HIGHZ,CLAMP,BYPASS,NBSRST)";
attribute BOUNDARY_LENGTH of FLEX18_BASE4 : entity is 174;
attribute BOUNDARY_REGISTER of FLEX18_BASE4 : entity is
"0 (BC_1, *, control, 0),"&
"1 (BC_7, ldq(18), bidir, X, 0, 0, Z),"&
"2 (BC_1, *, control, 0),"&
"3 (BC_7, ldq(19), bidir, X, 2, 0, Z),"&
"4 (BC_1, *, control, 0),"&
"5 (BC_7, ldq(25), bidir, X, 4, 0, Z),"&
"6 (BC_1, *, control, 0),"&
"7 (BC_7, ldq(21), bidir, X, 6, 0, Z),"&
"8 (BC_1, *, control, 0),"&
"9 (BC_7, ldq(22), bidir, X, 8, 0, Z),"&
"10 (BC_1, *, control, 0),"&
"11 (BC_7, ldq(23), bidir, X, 10, 0, Z),"&
"12 (BC_1, *, control, 0),"&
"13 (BC_7, ldq(26), bidir, X, 12, 0, Z),"&
"14 (BC_1, *, control, 0),"&
"15 (BC_7, ldq(20), bidir, X, 14, 0, Z),"&
"16 (BC_1, *, control, 0),"&
"17 (BC_7, ldq(24), bidir, X, 16, 0, Z),"&
"18 (BC_1, *, control, 0),"&
"19 (BC_7, la(17), bidir, X, 18, 0, Z),"&
"20 (BC_1, *, control, 0),"&
"21 (BC_7, la(16), bidir, X, 20, 0, Z),"&
"22 (BC_1, *, control, 0),"&
"23 (BC_7, la(15), bidir, X, 22, 0, Z),"&
"24 (BC_1, *, control, 0),"&
"25 (BC_7, la(14), bidir, X, 24, 0, Z),"&
"26 (BC_1, *, control, 0),"&
"27 (BC_7, la(13), bidir, X, 26, 0, Z),"&
"28 (BC_1, *, control, 0),"&
"29 (BC_7, la(12), bidir, X, 28, 0, Z),"&
"30 (BC_1, *, control, 0),"&
"31 (BC_7, la(11), bidir, X, 30, 0, Z),"&
"32 (BC_1, *, control, 0),"&
"33 (BC_7, la(10), bidir, X, 32, 0, Z),"&
"34 (BC_1, *, control, 0),"&
"35 (BC_7, la(9), bidir, X, 34, 0, Z),"&
"36 (BC_1, *, control, 0),"&
"37 (BC_7, la(8), bidir, X, 36, 0, Z),"&
"38 (BC_1, lcntmsk, input, X),"&
"39 (BC_1, lcntrstb, input, X),"&
"40 (BC_1, lcntenb, input, X),"&
"41 (BC_1, ladsb, input, X),"&
"42 (BC_1, lclk, input, X),"&
"43 (BC_1, lrw, input, X),"&
"44 (BC_1, lce0b, input, X),"&
"45 (BC_1, loeb, input, X),"&
"46 (BC_1, lbb(3), input, X),"&
"47 (BC_1, lbb(2), input, X),"&
"48 (BC_1, lce1, input, X),"&
"49 (BC_1, *, control, 0),"&
"50 (BC_7, la(7), bidir, X, 49, 0, Z),"&
"51 (BC_1, *, control, 0),"&
"52 (BC_7, la(6), bidir, X, 51, 0, Z),"&
"53 (BC_1, *, control, 0),"&
"54 (BC_7, la(5), bidir, X, 53, 0, Z),"&
"55 (BC_1, *, control, 0),"&
"56 (BC_7, la(4), bidir, X, 55, 0, Z),"&
"57 (BC_1, *, control, 0),"&
"58 (BC_7, la(3), bidir, X, 57, 0, Z),"&
"59 (BC_1, *, control, 0),"&
"60 (BC_7, la(2), bidir, X, 59, 0, Z),"&
"61 (BC_1, *, control, 0),"&
"62 (BC_7, la(1), bidir, X, 61, 0, Z),"&
"63 (BC_1, *, control, 0),"&
"64 (BC_7, la(0), bidir, X, 63, 0, Z),"&
"65 (BC_1, *, control, 0),"&
"66 (BC_7, ldq(35), bidir, X, 65, 0, Z),"&
"67 (BC_1, *, control, 0),"&
"68 (BC_7, ldq(34), bidir, X, 67, 0, Z),"&
"69 (BC_1, *, control, 0),"&
"70 (BC_7, ldq(33), bidir, X, 69, 0, Z),"&
"71 (BC_1, *, control, 0),"&
"72 (BC_7, ldq(32), bidir, X, 71, 0, Z),"&
"73 (BC_1, *, control, 0),"&
"74 (BC_7, ldq(31), bidir, X, 73, 0, Z),"&
"75 (BC_1, *, control, 0),"&
"76 (BC_7, ldq(30), bidir, X, 75, 0, Z),"&
"77 (BC_1, *, control, 0),"&
"78 (BC_7, ldq(28), bidir, X, 77, 0, Z),"&
"79 (BC_1, *, control, 0),"&
"80 (BC_7, ldq(29), bidir, X, 79, 0, Z),"&
"81 (BC_1, *, control, 0),"&
"82 (BC_7, ldq(27), bidir, X, 81, 0, Z),"&
"83 (BC_1, *, control, 0),"&
"84 (BC_1, lintb, output3, X, 83, 0, Z),"&
"85 (BC_1, *, control, 0),"&
"86 (BC_1, lcntintb, output3, X, 85, 0, Z),"&
"87 (BC_1, *, control, 0),"&
"88 (BC_1, rcntintb, output3, X, 87, 0, Z),"&
"89 (BC_1, *, control, 0),"&
"90 (BC_1, rintb, output3, X, 89, 0, Z),"&
"91 (BC_1, *, control, 0),"&
"92 (BC_7, rdq(27), bidir, X, 91, 0, Z),"&
"93 (BC_1, *, control, 0),"&
"94 (BC_7, rdq(29), bidir, X, 93, 0, Z),"&
"95 (BC_1, *, control, 0),"&
"96 (BC_7, rdq(28), bidir, X, 95, 0, Z),"&
"97 (BC_1, *, control, 0),"&
"98 (BC_7, rdq(30), bidir, X, 97, 0, Z),"&
"99 (BC_1, *, control, 0),"&
"100 (BC_7, rdq(31), bidir, X, 99, 0, Z),"&
"101 (BC_1, *, control, 0),"&
"102 (BC_7, rdq(32), bidir, X, 101, 0, Z),"&
"103 (BC_1, *, control, 0),"&
"104 (BC_7, rdq(33), bidir, X, 103, 0, Z),"&
"105 (BC_1, *, control, 0),"&
"106 (BC_7, rdq(34), bidir, X, 105, 0, Z),"&
"107 (BC_1, *, control, 0),"&
"108 (BC_7, rdq(35), bidir, X, 107, 0, Z),"&
"109 (BC_1, *, control, 0),"&
"110 (BC_7, ra(0), bidir, X, 109, 0, Z),"&
"111 (BC_1, *, control, 0),"&
"112 (BC_7, ra(1), bidir, X, 111, 0, Z),"&
"113 (BC_1, *, control, 0),"&
"114 (BC_7, ra(2), bidir, X, 113, 0, Z),"&
"115 (BC_1, *, control, 0),"&
"116 (BC_7, ra(3), bidir, X, 115, 0, Z),"&
"117 (BC_1, *, control, 0),"&
"118 (BC_7, ra(4), bidir, X, 117, 0, Z),"&
"119 (BC_1, *, control, 0),"&
"120 (BC_7, ra(5), bidir, X, 119, 0, Z),"&
"121 (BC_1, *, control, 0),"&
"122 (BC_7, ra(6), bidir, X, 121, 0, Z),"&
"123 (BC_1, *, control, 0),"&
"124 (BC_7, ra(7), bidir, X, 123, 0, Z),"&
"125 (BC_1, rce1, input, X),"&
"126 (BC_1, rbb(2), input, X),"&
"127 (BC_1, rbb(3), input, X),"&
"128 (BC_1, roeb, input, X),"&
"129 (BC_1, rce0b, input, X),"&
"130 (BC_1, rrw, input, X),"&
"131 (BC_1, rclk, input, X),"&
"132 (BC_1, radsb, input, X),"&
"133 (BC_1, rcntenb, input, X),"&
"134 (BC_1, rcntrstb, input, X),"&
"135 (BC_1, rcntmsk, input, X),"&
"136 (BC_1, *, control, 0),"&
"137 (BC_7, ra(8), bidir, X, 136, 0, Z),"&
"138 (BC_1, *, control, 0),"&
"139 (BC_7, ra(9), bidir, X, 138, 0, Z),"&
"140 (BC_1, *, control, 0),"&
"141 (BC_7, ra(10), bidir, X, 140, 0, Z),"&
"142 (BC_1, *, control, 0),"&
"143 (BC_7, ra(11), bidir, X, 142, 0, Z),"&
"144 (BC_1, *, control, 0),"&
"145 (BC_7, ra(12), bidir, X, 144, 0, Z),"&
"146 (BC_1, *, control, 0),"&
"147 (BC_7, ra(13), bidir, X, 146, 0, Z),"&
"148 (BC_1, *, control, 0),"&
"149 (BC_7, ra(14), bidir, X, 148, 0, Z),"&
"150 (BC_1, *, control, 0),"&
"151 (BC_7, ra(15), bidir, X, 150, 0, Z),"&
"152 (BC_1, *, control, 0),"&
"153 (BC_7, ra(16), bidir, X, 152, 0, Z),"&
"154 (BC_1, *, control, 0),"&
"155 (BC_7, ra(17), bidir, X, 154, 0, Z),"&
"156 (BC_1, *, control, 0),"&
"157 (BC_7, rdq(24), bidir, X, 156, 0, Z),"&
"158 (BC_1, *, control, 0),"&
"159 (BC_7, rdq(20), bidir, X, 158, 0, Z),"&
"160 (BC_1, *, control, 0),"&
"161 (BC_7, rdq(26), bidir, X, 160, 0, Z),"&
"162 (BC_1, *, control, 0),"&
"163 (BC_7, rdq(23), bidir, X, 162, 0, Z),"&
"164 (BC_1, *, control, 0),"&
"165 (BC_7, rdq(22), bidir, X, 164, 0, Z),"&
"166 (BC_1, *, control, 0),"&
"167 (BC_7, rdq(21), bidir, X, 166, 0, Z),"&
"168 (BC_1, *, control, 0),"&
"169 (BC_7, rdq(25), bidir, X, 168, 0, Z),"&
"170 (BC_1, *, control, 0),"&
"171 (BC_7, rdq(19), bidir, X, 170, 0, Z),"&
"172 (BC_1, *, control, 0),"&
"173 (BC_7, rdq(18), bidir, X, 172, 0, Z)";
end FLEX18_BASE4;