--$ XILINX$RCSfile: xcr3032c_vq44.bsd,v $
--$ XILINX$Revision: 1.1 $
--
-- Version 0.2 7/12/99 update of register length
-- and version ID information
--
-- BSDL file for device XCR3032c, package VQ44
-- Xilinx, Inc. $State: ADVANCED $ $Date: 2000-07-27 10:01:07-07 $
-- Generated by
--
-- IMPORTANT NOTE WARNING !!
-- ****************************************************************
-- Boundary registers as called out by this file do not exist!
-- They must be described for BSDL Compliance. Extest and
-- Preload commands do not exist nor function. If either of
-- those commands are selected, the bypass register will be
-- used.
--
-- For technical support, contact Xilinx at
--
-- http://support.xilinx.com
--
-- or as follow:
-- North America 1-800-255-7778 hotline@xilinx.com
-- United Kingdom (44) 1932 820821 ukhelp@xilinx.com
-- France (33) 1 3463 0100 frhelp@xilinx.com
-- Germany (49) 89 991 54930 dlhelp@xilinx.com
-- Japan (81) 3-3297-9163 jhotline@xilinx.com
--
entity XCR3032c_VQ44C is
generic (PHYSICAL_PIN_MAP : string := "xcr3032c");
port (din : linkage bit_vector (0 to 3); -- Tim pin type IN
TDI : in bit; -- Tim pin type TDI
TMS : in bit; -- Tim pin type TMS
TCK : in bit; -- Tim pin type TCK
TDO : out bit; -- Tim pin type TDO
ioA : linkage bit_vector (0 to 13); -- Tim pin type IOO
ioB : linkage bit_vector (0 to 13); -- Tim pin type IOO
Vcc : linkage bit_vector (1 to 4);
Gnd : linkage bit_vector (1 to 4)
);
use STD_1149_1_1994.ALL;
attribute COMPONENT_CONFORMANCE of XCR3032c_VQ44C : entity is "std_1149_1_1993";
attribute PIN_MAP of XCR3032c_VQ44C : entity is PHYSICAL_PIN_MAP;
constant xcr3032c : PIN_MAP_STRING :=
"din : (37, 39, 38, 40)," &
"TDI : 1," &
"TMS : 7," &
"TCK : 26," &
"TDO : 32," &
"ioA : ( 42, 43, 44, 2, 3, 5, 6, 8, 10, 11, 12, 13, 14, 15)," &
"ioB : ( 35, 34, 33, 31, 30, 28, 27, 25, 23, 22, 21, 20, 19, 18)," &
"Vcc : ( 9, 17, 29, 41)," &
"Gnd : ( 4, 16, 24, 36)";
attribute TAP_SCAN_CLOCK of TCK : signal is (10.0e6, both);
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
-- Instruction Register Definitions
attribute INSTRUCTION_LENGTH of XCR3032c_VQ44C : entity is 4;
attribute INSTRUCTION_OPCODE of XCR3032c_VQ44C : entity is
"SAMPLE (0010)," &
"EXTEST (0000)," &
"IDCODE (0001)," &
"BYPASS (1111)," &
"ENABLEOTF (1000)," &
"ENABLE (1001)," &
"ERASE (1010)," &
"PROGRAM (1011)," &
"VERIFY (1100)," &
"INIT (1101)";
attribute INSTRUCTION_CAPTURE of XCR3032c_VQ44C : entity is "0001";
attribute IDCODE_REGISTER of XCR3032c_VQ44C : entity is
"0000" & -- Version May need to modify on individual basis
"000" & -- Architecture
"000" & -- Technology
"000001" & -- Part number
"1" & -- Voltage
"010" & -- Package
"00000010101" & -- Manufacturer
"1"; -- mandatory
attribute REGISTER_ACCESS of XCR3032c_VQ44C : entity is
"DEVICE_ID (IDCODE)," &
"BOUNDARY (SAMPLE)," &
"BYPASS (BYPASS)," &
"DATAREG[262] (ENABLEOTF)," &
"DATAREG[262] (ENABLE)," &
"DATAREG[262] (ERASE)," &
"DATAREG[262] (PROGRAM)," &
"DATAREG[262] (VERIFY)," &
"BYPASS (INIT)";
attribute BOUNDARY_LENGTH of XCR3032c_VQ44C : entity is 1;
attribute BOUNDARY_REGISTER of XCR3032c_VQ44C : entity is
--
-- num cell port function safe [ccell disval rslt]
--
"0 (BC_1, *, INTERNAL, X)";
end XCR3032c_VQ44C;