-- (c) Copyright 2008 - 2009 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- releated to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitiations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
--
--
-- BSDL file for device XC6SLX9L, package FTG256
-- Generated by bsdlnet Version 1.5
------------------------------------------------------------------------
-- Modification History
-- | Generated on 02/10/09
-- | CR # N/A
-- | Details - Initial Release with HSWAPEN a compliance enable
------------------------------------------------------------------------
-- | Generated on 03/30/09
-- | CR # N/A
-- | Details - Added "g" to pkg names and swapped pins on 45tfgg484.
------------------------------------------------------------------------
-- | Generated on 05/22/09
-- | CR # N/A
-- | Details - Removed HSWAPEN as a compliance enable.
------------------------------------------------------------------------
-- | Generated on 06/26/09
-- | CR # N/A
-- | Details - Added EFUSE instructions.
------------------------------------------------------------------------
-- | Generated on 07/23/09
-- | CR # N/A
-- | Details - Modified as per Jtag Tech, removed ISC_ENABLE/PROGRAM/
-- | NOOP/DISABLE from Private, changed ISC_PROGRAM_KEY
-- | instruction width from 8 bits to 4 bits.
------------------------------------------------------------------------
-- | Generated on 08/10/09
-- | CR # 528895/527734/523341
-- | Details - Changed TCK from 33MHz to 25MHz, removed 1149.6 reference,
-- | updated Done, M0, M1, Init to have disrslt be PULL1.
------------------------------------------------------------------------
-- | Generated on 06/03/10
-- | CR # 561777
-- | Details - Changed ISC_DNA opcode from 010111 to 110000 and removed
-- | ISC_FUSE_READ.
------------------------------------------------------------------------
-- | Generated on 10/04/10
-- | CR # 569247
-- | Details - Changed TCK max freq from 25MHz to 18MHz for low pwr devices.
------------------------------------------------------------------------
--
-- For technical support, http://support.xilinx.com -> enter text 'bsdl'
-- in the text search box at the left of the page. If none of
-- these records resolve your problem you should open a web support case
-- or contact our technical support at:
--
-- North America 1-800-255-7778 hotline@xilinx.com
-- United Kingdom +44 870 7350 610 eurosupport@xilinx.com
-- France (33) 1 3463 0100 eurosupport@xilinx.com
-- Germany (49) 89 991 54930 eurosupport@xilinx.com
-- Japan (81) 3-3297-9163 jhotline@xilinx.com
--
-- This BSDL file reflects the pre-configuration JTAG behavior. To reflect
-- the post-configuration JTAG behavior (if any), edit this file as described
-- below. Many of these changes are demonstrated by commented-out template
-- lines preceeding the lines they would replace:
--
-- 1. Enable USER instructions as appropriate (see below).
-- 2. Set disable result of all pads as configured.
-- 3. Set safe state of boundary cells as necessary.
-- 4. Rename entity if necessary to avoid name collisions.
-- 5. Modify USERCODE value in USERCODE_REGISTER declaration.
--
-- To prevent losing the current configuration, the boundary scan
-- test vectors should keep the PROGRAM_B pin high.
--
-- PROGRAM_B can only be captured, not updated. The value
-- at the pin is always used by the device.
--
-- All IOBs prior to configuration, and unused and output-only IOBs following
-- configuration, will sense their pad values during boundary-scan with an CMOS
-- input buffer. In order to properly capture a logic high value at one
-- of these IOBs into its input boundary scan cell, please refer to the
-- datasheet and user guide for proper input levels.
--
-- For post-configuration boundary scan only: If an IOB is configured to use
-- an input standard that uses VREF pins, then the boundary scan test vectors
-- must keep the used VREF pins 3-stated.
--
----------------------------------
-- BSDL File for P1149.1 Standard.
----------------------------------
-- ----------------------------------------------------------------------
-- This BSDL file has been checked and verified by JTAG Technologies B.V.
-- on 2009-11-23, for syntactical and semantic compliance with
-- IEEE standard 1149.1
-- using bsdl32.dll 1.6.0.5 - 20090604 Win32
-- copyright (c) 2009 JTAG Technologies B.V., All rights reserved
-- ----------------------------------------------------------------------
entity XC6SLX9L_FTG256 is
-- Generic Parameter
generic (PHYSICAL_PIN_MAP : string := "FTG256" );
-- Logical Port Description
port (
CMPCS_B: in bit; -- CMPCS_B_2
DONE: inout bit; -- DONE_2
GND: linkage bit_vector (1 to 26);
HSWAPEN: in bit; -- PAD1
IO_A10: inout bit; -- PAD24
IO_A11: inout bit; -- PAD32
IO_A12: inout bit; -- PAD36
IO_A13: inout bit; -- PAD38
IO_A14: inout bit; -- PAD42
IO_A2: inout bit; -- PAD192
IO_A3: inout bit; -- PAD200
IO_A4: inout bit; -- PAD2
IO_A5: inout bit; -- PAD4
IO_A6: inout bit; -- PAD8
IO_A7: inout bit; -- PAD12
IO_A8: inout bit; -- PAD20
IO_A9: inout bit; -- PAD22
IO_B1: inout bit; -- PAD188
IO_B10: inout bit; -- PAD23
IO_B12: inout bit; -- PAD35
IO_B14: inout bit; -- PAD41
IO_B15: inout bit; -- PAD47
IO_B16: inout bit; -- PAD48
IO_B2: inout bit; -- PAD191
IO_B3: inout bit; -- PAD199
IO_B5: inout bit; -- PAD3
IO_B6: inout bit; -- PAD7
IO_B8: inout bit; -- PAD19
IO_C1: inout bit; -- PAD187
IO_C10: inout bit; -- PAD28
IO_C11: inout bit; -- PAD31
IO_C13: inout bit; -- PAD37
IO_C15: inout bit; -- PAD55
IO_C16: inout bit; -- PAD56
IO_C2: inout bit; -- PAD184
IO_C3: inout bit; -- PAD183
IO_C5: inout bit; -- PAD6
IO_C6: inout bit; -- PAD14
IO_C7: inout bit; -- PAD11
IO_C8: inout bit; -- PAD30
IO_C9: inout bit; -- PAD21
IO_D1: inout bit; -- PAD186
IO_D11: inout bit; -- PAD43
IO_D12: inout bit; -- PAD44
IO_D14: inout bit; -- PAD51
IO_D16: inout bit; -- PAD52
IO_D3: inout bit; -- PAD185
IO_D5: inout bit; -- PAD5
IO_D6: inout bit; -- PAD13
IO_D8: inout bit; -- PAD29
IO_D9: inout bit; -- PAD34
IO_E1: inout bit; -- PAD180
IO_E10: inout bit; -- PAD27
IO_E11: inout bit; -- PAD40
IO_E12: inout bit; -- PAD46
IO_E13: inout bit; -- PAD45
IO_E15: inout bit; -- PAD57
IO_E16: inout bit; -- PAD58
IO_E2: inout bit; -- PAD179
IO_E3: inout bit; -- PAD196
IO_E4: inout bit; -- PAD195
IO_E6: inout bit; -- PAD10
IO_E7: inout bit; -- PAD25
IO_E8: inout bit; -- PAD26
IO_F1: inout bit; -- PAD170
IO_F10: inout bit; -- PAD39
IO_F12: inout bit; -- PAD49
IO_F13: inout bit; -- PAD53
IO_F14: inout bit; -- PAD54
IO_F15: inout bit; -- PAD59
IO_F16: inout bit; -- PAD60
IO_F2: inout bit; -- PAD169
IO_F3: inout bit; -- PAD194
IO_F4: inout bit; -- PAD193
IO_F5: inout bit; -- PAD198
IO_F6: inout bit; -- PAD197
IO_F7: inout bit; -- PAD9
IO_F9: inout bit; -- PAD33
IO_G1: inout bit; -- PAD168
IO_G11: inout bit; -- PAD50
IO_G12: inout bit; -- PAD65
IO_G14: inout bit; -- PAD61
IO_G16: inout bit; -- PAD62
IO_G3: inout bit; -- PAD167
IO_G5: inout bit; -- PAD190
IO_G6: inout bit; -- PAD189
IO_H1: inout bit; -- PAD166
IO_H11: inout bit; -- PAD66
IO_H13: inout bit; -- PAD67
IO_H14: inout bit; -- PAD68
IO_H15: inout bit; -- PAD63
IO_H16: inout bit; -- PAD64
IO_H2: inout bit; -- PAD165
IO_H3: inout bit; -- PAD176
IO_H4: inout bit; -- PAD175
IO_H5: inout bit; -- PAD174
IO_J1: inout bit; -- PAD164
IO_J11: inout bit; -- PAD69
IO_J12: inout bit; -- PAD70
IO_J13: inout bit; -- PAD71
IO_J14: inout bit; -- PAD75
IO_J16: inout bit; -- PAD76
IO_J3: inout bit; -- PAD163
IO_J4: inout bit; -- PAD172
IO_J6: inout bit; -- PAD173
IO_K1: inout bit; -- PAD162
IO_K11: inout bit; -- PAD74
IO_K12: inout bit; -- PAD73
IO_K14: inout bit; -- PAD72
IO_K15: inout bit; -- PAD77
IO_K16: inout bit; -- PAD78
IO_K2: inout bit; -- PAD161
IO_K3: inout bit; -- PAD171
IO_K5: inout bit; -- PAD181
IO_K6: inout bit; -- PAD182
IO_L1: inout bit; -- PAD160
IO_L10: inout bit; -- PAD115
IO_L12: inout bit; -- PAD95
IO_L13: inout bit; -- PAD96
IO_L14: inout bit; -- PAD83
IO_L16: inout bit; -- PAD84
IO_L3: inout bit; -- PAD159
IO_L4: inout bit; -- PAD177
IO_L5: inout bit; -- PAD178
IO_L7: inout bit; -- PAD138
IO_L8: inout bit; -- PAD137
IO_M1: inout bit; -- PAD158
IO_M10: inout bit; -- PAD116
IO_M11: inout bit; -- PAD104
IO_M12: inout bit; -- PAD103
IO_M13: inout bit; -- PAD99
IO_M14: inout bit; -- PAD100
IO_M15: inout bit; -- PAD81
IO_M16: inout bit; -- PAD82
IO_M2: inout bit; -- PAD157
IO_M3: inout bit; -- PAD146
IO_M4: inout bit; -- PAD145
IO_M5: inout bit; -- PAD147
IO_M6: inout bit; -- PAD141
IO_M7: inout bit; -- PAD122
IO_M9: inout bit; -- PAD117
IO_N1: inout bit; -- PAD156
IO_N11: inout bit; -- PAD109
IO_N12: inout bit; -- PAD107
IO_N14: inout bit; -- PAD79
IO_N16: inout bit; -- PAD80
IO_N3: inout bit; -- PAD155
IO_N4: inout bit; -- PAD148
IO_N5: inout bit; -- PAD135
IO_N6: inout bit; -- PAD142
IO_N8: inout bit; -- PAD118
IO_N9: inout bit; -- PAD111
IO_P1: inout bit; -- PAD154
IO_P10: inout bit; -- PAD105
IO_P11: inout bit; -- PAD110
IO_P12: inout bit; -- PAD108
IO_P15: inout bit; -- PAD85
IO_P16: inout bit; -- PAD86
IO_P2: inout bit; -- PAD153
IO_P4: inout bit; -- PAD139
IO_P5: inout bit; -- PAD136
IO_P6: inout bit; -- PAD131
IO_P7: inout bit; -- PAD121
IO_P8: inout bit; -- PAD119
IO_P9: inout bit; -- PAD112
IO_R1: inout bit; -- PAD152
IO_R11: inout bit; -- PAD101
IO_R12: inout bit; -- PAD93
IO_R14: inout bit; -- PAD89
IO_R15: inout bit; -- PAD87
IO_R16: inout bit; -- PAD88
IO_R2: inout bit; -- PAD151
IO_R3: inout bit; -- PAD143
IO_R5: inout bit; -- PAD133
IO_R7: inout bit; -- PAD123
IO_R9: inout bit; -- PAD113
IO_T10: inout bit; -- PAD106
IO_T11: inout bit; -- PAD102
IO_T12: inout bit; -- PAD94
IO_T13: inout bit; -- PAD92
IO_T14: inout bit; -- PAD91
IO_T15: inout bit; -- PAD90
IO_T3: inout bit; -- PAD144
IO_T4: inout bit; -- PAD140
IO_T5: inout bit; -- PAD134
IO_T6: inout bit; -- PAD132
IO_T7: inout bit; -- PAD124
IO_T8: inout bit; -- PAD120
IO_T9: inout bit; -- PAD114
PROGRAM_B: in bit; -- PROGRAM_B_2
SUSPEND: in bit;
TCK: in bit;
TDI: in bit;
TDO: out bit;
TMS: in bit;
VCCAUX: linkage bit_vector (1 to 8);
VCCINT: linkage bit_vector (1 to 8);
VCCO_0: linkage bit_vector (1 to 5);
VCCO_1: linkage bit_vector (1 to 6);
VCCO_2: linkage bit_vector (1 to 4);
VCCO_3: linkage bit_vector (1 to 5)
); --end port list
-- Use Statements
use STD_1149_1_2001.all;
-- Component Conformance Statement(s)
attribute COMPONENT_CONFORMANCE of XC6SLX9L_FTG256 : entity is
"STD_1149_1_2001";
-- Device Package Pin Mappings
attribute PIN_MAP of XC6SLX9L_FTG256 : entity is PHYSICAL_PIN_MAP;
constant FTG256: PIN_MAP_STRING:=
"CMPCS_B:L11," &
"DONE:P13," &
"GND:(A1,A16,B7,B11,D4,D13,E9,G2,G8,G15," &
"H7,H9,H12,J5,J8,K7,K9,L2,L15,M8," &
"N13,P3,R6,R10,T1,T16)," &
"HSWAPEN:C4," &
"IO_A10:A10," &
"IO_A11:A11," &
"IO_A12:A12," &
"IO_A13:A13," &
"IO_A14:A14," &
"IO_A2:A2," &
"IO_A3:A3," &
"IO_A4:A4," &
"IO_A5:A5," &
"IO_A6:A6," &
"IO_A7:A7," &
"IO_A8:A8," &
"IO_A9:A9," &
"IO_B1:B1," &
"IO_B10:B10," &
"IO_B12:B12," &
"IO_B14:B14," &
"IO_B15:B15," &
"IO_B16:B16," &
"IO_B2:B2," &
"IO_B3:B3," &
"IO_B5:B5," &
"IO_B6:B6," &
"IO_B8:B8," &
"IO_C1:C1," &
"IO_C10:C10," &
"IO_C11:C11," &
"IO_C13:C13," &
"IO_C15:C15," &
"IO_C16:C16," &
"IO_C2:C2," &
"IO_C3:C3," &
"IO_C5:C5," &
"IO_C6:C6," &
"IO_C7:C7," &
"IO_C8:C8," &
"IO_C9:C9," &
"IO_D1:D1," &
"IO_D11:D11," &
"IO_D12:D12," &
"IO_D14:D14," &
"IO_D16:D16," &
"IO_D3:D3," &
"IO_D5:D5," &
"IO_D6:D6," &
"IO_D8:D8," &
"IO_D9:D9," &
"IO_E1:E1," &
"IO_E10:E10," &
"IO_E11:E11," &
"IO_E12:E12," &
"IO_E13:E13," &
"IO_E15:E15," &
"IO_E16:E16," &
"IO_E2:E2," &
"IO_E3:E3," &
"IO_E4:E4," &
"IO_E6:E6," &
"IO_E7:E7," &
"IO_E8:E8," &
"IO_F1:F1," &
"IO_F10:F10," &
"IO_F12:F12," &
"IO_F13:F13," &
"IO_F14:F14," &
"IO_F15:F15," &
"IO_F16:F16," &
"IO_F2:F2," &
"IO_F3:F3," &
"IO_F4:F4," &
"IO_F5:F5," &
"IO_F6:F6," &
"IO_F7:F7," &
"IO_F9:F9," &
"IO_G1:G1," &
"IO_G11:G11," &
"IO_G12:G12," &
"IO_G14:G14," &
"IO_G16:G16," &
"IO_G3:G3," &
"IO_G5:G5," &
"IO_G6:G6," &
"IO_H1:H1," &
"IO_H11:H11," &
"IO_H13:H13," &
"IO_H14:H14," &
"IO_H15:H15," &
"IO_H16:H16," &
"IO_H2:H2," &
"IO_H3:H3," &
"IO_H4:H4," &
"IO_H5:H5," &
"IO_J1:J1," &
"IO_J11:J11," &
"IO_J12:J12," &
"IO_J13:J13," &
"IO_J14:J14," &
"IO_J16:J16," &
"IO_J3:J3," &
"IO_J4:J4," &
"IO_J6:J6," &
"IO_K1:K1," &
"IO_K11:K11," &
"IO_K12:K12," &
"IO_K14:K14," &
"IO_K15:K15," &
"IO_K16:K16," &
"IO_K2:K2," &
"IO_K3:K3," &
"IO_K5:K5," &
"IO_K6:K6," &
"IO_L1:L1," &
"IO_L10:L10," &
"IO_L12:L12," &
"IO_L13:L13," &
"IO_L14:L14," &
"IO_L16:L16," &
"IO_L3:L3," &
"IO_L4:L4," &
"IO_L5:L5," &
"IO_L7:L7," &
"IO_L8:L8," &
"IO_M1:M1," &
"IO_M10:M10," &
"IO_M11:M11," &
"IO_M12:M12," &
"IO_M13:M13," &
"IO_M14:M14," &
"IO_M15:M15," &
"IO_M16:M16," &
"IO_M2:M2," &
"IO_M3:M3," &
"IO_M4:M4," &
"IO_M5:M5," &
"IO_M6:M6," &
"IO_M7:M7," &
"IO_M9:M9," &
"IO_N1:N1," &
"IO_N11:N11," &
"IO_N12:N12," &
"IO_N14:N14," &
"IO_N16:N16," &
"IO_N3:N3," &
"IO_N4:N4," &
"IO_N5:N5," &
"IO_N6:N6," &
"IO_N8:N8," &
"IO_N9:N9," &
"IO_P1:P1," &
"IO_P10:P10," &
"IO_P11:P11," &
"IO_P12:P12," &
"IO_P15:P15," &
"IO_P16:P16," &
"IO_P2:P2," &
"IO_P4:P4," &
"IO_P5:P5," &
"IO_P6:P6," &
"IO_P7:P7," &
"IO_P8:P8," &
"IO_P9:P9," &
"IO_R1:R1," &
"IO_R11:R11," &
"IO_R12:R12," &
"IO_R14:R14," &
"IO_R15:R15," &
"IO_R16:R16," &
"IO_R2:R2," &
"IO_R3:R3," &
"IO_R5:R5," &
"IO_R7:R7," &
"IO_R9:R9," &
"IO_T10:T10," &
"IO_T11:T11," &
"IO_T12:T12," &
"IO_T13:T13," &
"IO_T14:T14," &
"IO_T15:T15," &
"IO_T3:T3," &
"IO_T4:T4," &
"IO_T5:T5," &
"IO_T6:T6," &
"IO_T7:T7," &
"IO_T8:T8," &
"IO_T9:T9," &
"PROGRAM_B:T2," &
"SUSPEND:P14," &
"TCK:C14," &
"TDI:C12," &
"TDO:E14," &
"TMS:A15," &
"VCCAUX:(E5,F8,F11,G10,H6,J10,L6,L9)," &
"VCCINT:(G7,G9,H8,H10,J7,J9,K8,K10)," &
"VCCO_0:(B4,B9,B13,D7,D10)," &
"VCCO_1:(D15,G13,J15,K13,N15,R13)," &
"VCCO_2:(N7,N10,R4,R8)," &
"VCCO_3:(D2,G4,J2,K4,N2)";
-- Scan Port Identification
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (18.0e6, BOTH);
-- Compliance-Enable Description
attribute COMPLIANCE_PATTERNS of XC6SLX9L_FTG256 : entity is
"(PROGRAM_B) (1)";
-- Instruction Register Description
attribute INSTRUCTION_LENGTH of XC6SLX9L_FTG256 : entity is 6;
attribute INSTRUCTION_OPCODE of XC6SLX9L_FTG256 : entity is
"EXTEST (001111)," &
"SAMPLE (000001)," &
"PRELOAD (000001)," & -- Same as SAMPLE
"USER1 (000010)," & -- Not available until after configuration
"USER2 (000011)," & -- Not available until after configuration
"USER3 (011010)," & -- Not available until after configuration
"USER4 (011011)," & -- Not available until after configuration
"CFG_OUT (000100)," & -- Not available during configuration with another mode.
"CFG_IN (000101)," & -- Not available during configuration with another mode.
"INTEST (000111)," &
"USERCODE (001000)," &
"IDCODE (001001)," &
"HIGHZ (001010)," &
"JPROGRAM (001011)," & -- Not available during configuration with another mode.
"JSTART (001100)," & -- Not available during configuration with another mode.
"JSHUTDOWN (001101)," & -- Not available during configuration with another mode.
"BYPASS (111111)," &
"FUSE_UPDATE (111010)," &
"FUSE_KEY (111011)," &
"FUSE_OPTIONS (111100)," &
"FUSE_CNTL (111101)," &
"ISC_FUSE_WRITE (110001)," &
"ISC_IOIMISR (110010)," &
"ISC_ENABLE (010000)," &
"ISC_PROGRAM (010001)," &
"ISC_PROGRAM_KEY (010010)," &
"ISC_ADDRESS_SHIFT (010011)," &
"ISC_NOOP (010100)," &
"ISC_READ (010101)," &
"ISC_DISABLE (010110)," &
"ISC_DNA (110000)";
attribute INSTRUCTION_CAPTURE of XC6SLX9L_FTG256 : entity is
-- Bit 5 is 1 when DONE is released (part of startup sequence)
-- Bit 4 is 1 if house-cleaning is complete
-- Bit 3 is ISC_Enabled
-- Bit 2 is ISC_Done
"XXXX01" ;
attribute INSTRUCTION_PRIVATE of XC6SLX9L_FTG256 : entity is
-- If the device is configured, and a USER instruction is implemented
-- and not private to the FPGA designer, then it should be removed
-- from INSTRUCTION_PRIVATE, and the target register should be defined
-- in REGISTER_ACCESS.
"USER1," &
"USER2," &
"USER3," &
"USER4," &
"CFG_OUT," &
"CFG_IN," &
"JPROGRAM," &
"JSTART," &
"JSHUTDOWN," &
"FUSE_UPDATE," &
"FUSE_KEY," &
"FUSE_OPTIONS," &
"FUSE_CNTL," &
"ISC_FUSE_WRITE," &
"ISC_IOIMISR," &
"ISC_PROGRAM_KEY," &
"ISC_ADDRESS_SHIFT," &
"ISC_READ," &
"ISC_DNA";
-- Optional Register Description
attribute IDCODE_REGISTER of XC6SLX9L_FTG256 : entity is
"XXXX" & -- version
"0100000" & -- family
"000000001" & -- array size
"00001001001" & -- manufacturer
"1"; -- required by 1149.1
attribute USERCODE_REGISTER of XC6SLX9L_FTG256 : entity is
"XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX";
-- Register Access Description
attribute REGISTER_ACCESS of XC6SLX9L_FTG256 : entity is
-- "<reg_name>[<length>] (USER1)," &
-- "<reg_name>[<length>] (USER2)," &
-- "<reg_name>[<length>] (USER3)," &
-- "<reg_name>[<length>] (USER4)," &
"DEVICE_ID (USERCODE,IDCODE)," &
"DATAREG[57] (ISC_DNA)," &
"BYPASS (BYPASS,HIGHZ,JPROGRAM,JSTART,JSHUTDOWN)," &
"ISC_PDATA[16] (ISC_PROGRAM),"&
"ISC_DEFAULT[5] (ISC_NOOP)," &
"ISC_CONFIG[5] (ISC_ENABLE,ISC_DISABLE)," &
"BOUNDARY (SAMPLE,PRELOAD,EXTEST,INTEST)";
-- Boundary-Scan Register Description
attribute BOUNDARY_LENGTH of XC6SLX9L_FTG256 : entity is 612;
attribute BOUNDARY_REGISTER of XC6SLX9L_FTG256 : entity is
-- cellnum (type, port, function, safe[, ccell, disval, disrslt])
" 0 (BC_2, *, controlr, 1)," & -- TDO
" 1 (BC_2, IO_D12, output3, X, 0, 1, Z)," & -- PAD44
" 2 (BC_2, IO_D12, input, X)," & -- PAD44
" 3 (BC_2, *, controlr, 1)," &
" 4 (BC_2, IO_D11, output3, X, 3, 1, Z)," & -- PAD43
" 5 (BC_2, IO_D11, input, X)," & -- PAD43
" 6 (BC_2, *, controlr, 1)," &
" 7 (BC_2, IO_A14, output3, X, 6, 1, Z)," & -- PAD42
" 8 (BC_2, IO_A14, input, X)," & -- PAD42
" 9 (BC_2, *, controlr, 1)," &
" 10 (BC_2, IO_B14, output3, X, 9, 1, Z)," & -- PAD41
" 11 (BC_2, IO_B14, input, X)," & -- PAD41
" 12 (BC_2, *, controlr, 1)," &
" 13 (BC_2, IO_E11, output3, X, 12, 1, Z)," & -- PAD40
" 14 (BC_2, IO_E11, input, X)," & -- PAD40
" 15 (BC_2, *, controlr, 1)," &
" 16 (BC_2, IO_F10, output3, X, 15, 1, Z)," & -- PAD39
" 17 (BC_2, IO_F10, input, X)," & -- PAD39
" 18 (BC_2, *, controlr, 1)," &
" 19 (BC_2, IO_A13, output3, X, 18, 1, Z)," & -- PAD38
" 20 (BC_2, IO_A13, input, X)," & -- PAD38
" 21 (BC_2, *, controlr, 1)," &
" 22 (BC_2, IO_C13, output3, X, 21, 1, Z)," & -- PAD37
" 23 (BC_2, IO_C13, input, X)," & -- PAD37
" 24 (BC_2, *, controlr, 1)," &
" 25 (BC_2, IO_A12, output3, X, 24, 1, Z)," & -- PAD36
" 26 (BC_2, IO_A12, input, X)," & -- PAD36
" 27 (BC_2, *, controlr, 1)," &
" 28 (BC_2, IO_B12, output3, X, 27, 1, Z)," & -- PAD35
" 29 (BC_2, IO_B12, input, X)," & -- PAD35
" 30 (BC_2, *, controlr, 1)," &
" 31 (BC_2, IO_D9, output3, X, 30, 1, Z)," & -- PAD34
" 32 (BC_2, IO_D9, input, X)," & -- PAD34
" 33 (BC_2, *, controlr, 1)," &
" 34 (BC_2, IO_F9, output3, X, 33, 1, Z)," & -- PAD33
" 35 (BC_2, IO_F9, input, X)," & -- PAD33
" 36 (BC_2, *, controlr, 1)," &
" 37 (BC_2, IO_A11, output3, X, 36, 1, Z)," & -- PAD32
" 38 (BC_2, IO_A11, input, X)," & -- PAD32
" 39 (BC_2, *, controlr, 1)," &
" 40 (BC_2, IO_C11, output3, X, 39, 1, Z)," & -- PAD31
" 41 (BC_2, IO_C11, input, X)," & -- PAD31
" 42 (BC_2, *, controlr, 1)," &
" 43 (BC_2, IO_C8, output3, X, 42, 1, Z)," & -- PAD30
" 44 (BC_2, IO_C8, input, X)," & -- PAD30
" 45 (BC_2, *, controlr, 1)," &
" 46 (BC_2, IO_D8, output3, X, 45, 1, Z)," & -- PAD29
" 47 (BC_2, IO_D8, input, X)," & -- PAD29
" 48 (BC_2, *, controlr, 1)," &
" 49 (BC_2, IO_C10, output3, X, 48, 1, Z)," & -- PAD28
" 50 (BC_2, IO_C10, input, X)," & -- PAD28
" 51 (BC_2, *, controlr, 1)," &
" 52 (BC_2, IO_E10, output3, X, 51, 1, Z)," & -- PAD27
" 53 (BC_2, IO_E10, input, X)," & -- PAD27
" 54 (BC_2, *, controlr, 1)," &
" 55 (BC_2, IO_E8, output3, X, 54, 1, Z)," & -- PAD26
" 56 (BC_2, IO_E8, input, X)," & -- PAD26
" 57 (BC_2, *, controlr, 1)," &
" 58 (BC_2, IO_E7, output3, X, 57, 1, Z)," & -- PAD25
" 59 (BC_2, IO_E7, input, X)," & -- PAD25
" 60 (BC_2, *, controlr, 1)," &
" 61 (BC_2, IO_A10, output3, X, 60, 1, Z)," & -- PAD24
" 62 (BC_2, IO_A10, input, X)," & -- PAD24
" 63 (BC_2, *, controlr, 1)," &
" 64 (BC_2, IO_B10, output3, X, 63, 1, Z)," & -- PAD23
" 65 (BC_2, IO_B10, input, X)," & -- PAD23
" 66 (BC_2, *, controlr, 1)," &
" 67 (BC_2, IO_A9, output3, X, 66, 1, Z)," & -- PAD22
" 68 (BC_2, IO_A9, input, X)," & -- PAD22
" 69 (BC_2, *, controlr, 1)," &
" 70 (BC_2, IO_C9, output3, X, 69, 1, Z)," & -- PAD21
" 71 (BC_2, IO_C9, input, X)," & -- PAD21
" 72 (BC_2, *, controlr, 1)," &
" 73 (BC_2, IO_A8, output3, X, 72, 1, Z)," & -- PAD20
" 74 (BC_2, IO_A8, input, X)," & -- PAD20
" 75 (BC_2, *, controlr, 1)," &
" 76 (BC_2, IO_B8, output3, X, 75, 1, Z)," & -- PAD19
" 77 (BC_2, IO_B8, input, X)," & -- PAD19
" 78 (BC_2, *, internal, 1)," & -- PAD18.T
" 79 (BC_2, *, internal, X)," & -- PAD18.O
" 80 (BC_2, *, internal, X)," & -- PAD18.I
" 81 (BC_2, *, internal, 1)," & -- PAD17.T
" 82 (BC_2, *, internal, X)," & -- PAD17.O
" 83 (BC_2, *, internal, X)," & -- PAD17.I
" 84 (BC_2, *, internal, 1)," & -- PAD16.T
" 85 (BC_2, *, internal, X)," & -- PAD16.O
" 86 (BC_2, *, internal, X)," & -- PAD16.I
" 87 (BC_2, *, internal, 1)," & -- PAD15.T
" 88 (BC_2, *, internal, X)," & -- PAD15.O
" 89 (BC_2, *, internal, X)," & -- PAD15.I
" 90 (BC_2, *, controlr, 1)," &
" 91 (BC_2, IO_C6, output3, X, 90, 1, Z)," & -- PAD14
" 92 (BC_2, IO_C6, input, X)," & -- PAD14
" 93 (BC_2, *, controlr, 1)," &
" 94 (BC_2, IO_D6, output3, X, 93, 1, Z)," & -- PAD13
" 95 (BC_2, IO_D6, input, X)," & -- PAD13
" 96 (BC_2, *, controlr, 1)," &
" 97 (BC_2, IO_A7, output3, X, 96, 1, Z)," & -- PAD12
" 98 (BC_2, IO_A7, input, X)," & -- PAD12
" 99 (BC_2, *, controlr, 1)," &
" 100 (BC_2, IO_C7, output3, X, 99, 1, Z)," & -- PAD11
" 101 (BC_2, IO_C7, input, X)," & -- PAD11
" 102 (BC_2, *, controlr, 1)," &
" 103 (BC_2, IO_E6, output3, X, 102, 1, Z)," & -- PAD10
" 104 (BC_2, IO_E6, input, X)," & -- PAD10
" 105 (BC_2, *, controlr, 1)," &
" 106 (BC_2, IO_F7, output3, X, 105, 1, Z)," & -- PAD9
" 107 (BC_2, IO_F7, input, X)," & -- PAD9
" 108 (BC_2, *, controlr, 1)," &
" 109 (BC_2, IO_A6, output3, X, 108, 1, Z)," & -- PAD8
" 110 (BC_2, IO_A6, input, X)," & -- PAD8
" 111 (BC_2, *, controlr, 1)," &
" 112 (BC_2, IO_B6, output3, X, 111, 1, Z)," & -- PAD7
" 113 (BC_2, IO_B6, input, X)," & -- PAD7
" 114 (BC_2, *, controlr, 1)," &
" 115 (BC_2, IO_C5, output3, X, 114, 1, Z)," & -- PAD6
" 116 (BC_2, IO_C5, input, X)," & -- PAD6
" 117 (BC_2, *, controlr, 1)," &
" 118 (BC_2, IO_D5, output3, X, 117, 1, Z)," & -- PAD5
" 119 (BC_2, IO_D5, input, X)," & -- PAD5
" 120 (BC_2, *, controlr, 1)," &
" 121 (BC_2, IO_A5, output3, X, 120, 1, Z)," & -- PAD4
" 122 (BC_2, IO_A5, input, X)," & -- PAD4
" 123 (BC_2, *, controlr, 1)," &
" 124 (BC_2, IO_B5, output3, X, 123, 1, Z)," & -- PAD3
" 125 (BC_2, IO_B5, input, X)," & -- PAD3
" 126 (BC_2, *, controlr, 1)," &
" 127 (BC_2, IO_A4, output3, X, 126, 1, Z)," & -- PAD2
" 128 (BC_2, IO_A4, input, X)," & -- PAD2
" 129 (BC_2, *, internal, 1)," & -- HSWAPEN.T
" 130 (BC_2, *, internal, 1)," & -- HSWAPEN.O
" 131 (BC_2, HSWAPEN, input, X)," & -- PAD1
" 132 (BC_2, *, controlr, 1)," &
" 133 (BC_2, IO_A3, output3, X, 132, 1, Z)," & -- PAD200
" 134 (BC_2, IO_A3, input, X)," & -- PAD200
" 135 (BC_2, *, controlr, 1)," &
" 136 (BC_2, IO_B3, output3, X, 135, 1, Z)," & -- PAD199
" 137 (BC_2, IO_B3, input, X)," & -- PAD199
" 138 (BC_2, *, controlr, 1)," &
" 139 (BC_2, IO_F5, output3, X, 138, 1, Z)," & -- PAD198
" 140 (BC_2, IO_F5, input, X)," & -- PAD198
" 141 (BC_2, *, controlr, 1)," &
" 142 (BC_2, IO_F6, output3, X, 141, 1, Z)," & -- PAD197
" 143 (BC_2, IO_F6, input, X)," & -- PAD197
" 144 (BC_2, *, controlr, 1)," &
" 145 (BC_2, IO_E3, output3, X, 144, 1, Z)," & -- PAD196
" 146 (BC_2, IO_E3, input, X)," & -- PAD196
" 147 (BC_2, *, controlr, 1)," &
" 148 (BC_2, IO_E4, output3, X, 147, 1, Z)," & -- PAD195
" 149 (BC_2, IO_E4, input, X)," & -- PAD195
" 150 (BC_2, *, controlr, 1)," &
" 151 (BC_2, IO_F3, output3, X, 150, 1, Z)," & -- PAD194
" 152 (BC_2, IO_F3, input, X)," & -- PAD194
" 153 (BC_2, *, controlr, 1)," &
" 154 (BC_2, IO_F4, output3, X, 153, 1, Z)," & -- PAD193
" 155 (BC_2, IO_F4, input, X)," & -- PAD193
" 156 (BC_2, *, controlr, 1)," &
" 157 (BC_2, IO_A2, output3, X, 156, 1, Z)," & -- PAD192
" 158 (BC_2, IO_A2, input, X)," & -- PAD192
" 159 (BC_2, *, controlr, 1)," &
" 160 (BC_2, IO_B2, output3, X, 159, 1, Z)," & -- PAD191
" 161 (BC_2, IO_B2, input, X)," & -- PAD191
" 162 (BC_2, *, controlr, 1)," &
" 163 (BC_2, IO_G5, output3, X, 162, 1, Z)," & -- PAD190
" 164 (BC_2, IO_G5, input, X)," & -- PAD190
" 165 (BC_2, *, controlr, 1)," &
" 166 (BC_2, IO_G6, output3, X, 165, 1, Z)," & -- PAD189
" 167 (BC_2, IO_G6, input, X)," & -- PAD189
" 168 (BC_2, *, controlr, 1)," &
" 169 (BC_2, IO_B1, output3, X, 168, 1, Z)," & -- PAD188
" 170 (BC_2, IO_B1, input, X)," & -- PAD188
" 171 (BC_2, *, controlr, 1)," &
" 172 (BC_2, IO_C1, output3, X, 171, 1, Z)," & -- PAD187
" 173 (BC_2, IO_C1, input, X)," & -- PAD187
" 174 (BC_2, *, controlr, 1)," &
" 175 (BC_2, IO_D1, output3, X, 174, 1, Z)," & -- PAD186
" 176 (BC_2, IO_D1, input, X)," & -- PAD186
" 177 (BC_2, *, controlr, 1)," &
" 178 (BC_2, IO_D3, output3, X, 177, 1, Z)," & -- PAD185
" 179 (BC_2, IO_D3, input, X)," & -- PAD185
" 180 (BC_2, *, controlr, 1)," &
" 181 (BC_2, IO_C2, output3, X, 180, 1, Z)," & -- PAD184
" 182 (BC_2, IO_C2, input, X)," & -- PAD184
" 183 (BC_2, *, controlr, 1)," &
" 184 (BC_2, IO_C3, output3, X, 183, 1, Z)," & -- PAD183
" 185 (BC_2, IO_C3, input, X)," & -- PAD183
" 186 (BC_2, *, controlr, 1)," &
" 187 (BC_2, IO_K6, output3, X, 186, 1, Z)," & -- PAD182
" 188 (BC_2, IO_K6, input, X)," & -- PAD182
" 189 (BC_2, *, controlr, 1)," &
" 190 (BC_2, IO_K5, output3, X, 189, 1, Z)," & -- PAD181
" 191 (BC_2, IO_K5, input, X)," & -- PAD181
" 192 (BC_2, *, controlr, 1)," &
" 193 (BC_2, IO_E1, output3, X, 192, 1, Z)," & -- PAD180
" 194 (BC_2, IO_E1, input, X)," & -- PAD180
" 195 (BC_2, *, controlr, 1)," &
" 196 (BC_2, IO_E2, output3, X, 195, 1, Z)," & -- PAD179
" 197 (BC_2, IO_E2, input, X)," & -- PAD179
" 198 (BC_2, *, controlr, 1)," &
" 199 (BC_2, IO_L5, output3, X, 198, 1, Z)," & -- PAD178
" 200 (BC_2, IO_L5, input, X)," & -- PAD178
" 201 (BC_2, *, controlr, 1)," &
" 202 (BC_2, IO_L4, output3, X, 201, 1, Z)," & -- PAD177
" 203 (BC_2, IO_L4, input, X)," & -- PAD177
" 204 (BC_2, *, controlr, 1)," &
" 205 (BC_2, IO_H3, output3, X, 204, 1, Z)," & -- PAD176
" 206 (BC_2, IO_H3, input, X)," & -- PAD176
" 207 (BC_2, *, controlr, 1)," &
" 208 (BC_2, IO_H4, output3, X, 207, 1, Z)," & -- PAD175
" 209 (BC_2, IO_H4, input, X)," & -- PAD175
" 210 (BC_2, *, controlr, 1)," &
" 211 (BC_2, IO_H5, output3, X, 210, 1, Z)," & -- PAD174
" 212 (BC_2, IO_H5, input, X)," & -- PAD174
" 213 (BC_2, *, controlr, 1)," &
" 214 (BC_2, IO_J6, output3, X, 213, 1, Z)," & -- PAD173
" 215 (BC_2, IO_J6, input, X)," & -- PAD173
" 216 (BC_2, *, controlr, 1)," &
" 217 (BC_2, IO_J4, output3, X, 216, 1, Z)," & -- PAD172
" 218 (BC_2, IO_J4, input, X)," & -- PAD172
" 219 (BC_2, *, controlr, 1)," &
" 220 (BC_2, IO_K3, output3, X, 219, 1, Z)," & -- PAD171
" 221 (BC_2, IO_K3, input, X)," & -- PAD171
" 222 (BC_2, *, controlr, 1)," &
" 223 (BC_2, IO_F1, output3, X, 222, 1, Z)," & -- PAD170
" 224 (BC_2, IO_F1, input, X)," & -- PAD170
" 225 (BC_2, *, controlr, 1)," &
" 226 (BC_2, IO_F2, output3, X, 225, 1, Z)," & -- PAD169
" 227 (BC_2, IO_F2, input, X)," & -- PAD169
" 228 (BC_2, *, controlr, 1)," &
" 229 (BC_2, IO_G1, output3, X, 228, 1, Z)," & -- PAD168
" 230 (BC_2, IO_G1, input, X)," & -- PAD168
" 231 (BC_2, *, controlr, 1)," &
" 232 (BC_2, IO_G3, output3, X, 231, 1, Z)," & -- PAD167
" 233 (BC_2, IO_G3, input, X)," & -- PAD167
" 234 (BC_2, *, controlr, 1)," &
" 235 (BC_2, IO_H1, output3, X, 234, 1, Z)," & -- PAD166
" 236 (BC_2, IO_H1, input, X)," & -- PAD166
" 237 (BC_2, *, controlr, 1)," &
" 238 (BC_2, IO_H2, output3, X, 237, 1, Z)," & -- PAD165
" 239 (BC_2, IO_H2, input, X)," & -- PAD165
" 240 (BC_2, *, controlr, 1)," &
" 241 (BC_2, IO_J1, output3, X, 240, 1, Z)," & -- PAD164
" 242 (BC_2, IO_J1, input, X)," & -- PAD164
" 243 (BC_2, *, controlr, 1)," &
" 244 (BC_2, IO_J3, output3, X, 243, 1, Z)," & -- PAD163
" 245 (BC_2, IO_J3, input, X)," & -- PAD163
" 246 (BC_2, *, controlr, 1)," &
" 247 (BC_2, IO_K1, output3, X, 246, 1, Z)," & -- PAD162
" 248 (BC_2, IO_K1, input, X)," & -- PAD162
" 249 (BC_2, *, controlr, 1)," &
" 250 (BC_2, IO_K2, output3, X, 249, 1, Z)," & -- PAD161
" 251 (BC_2, IO_K2, input, X)," & -- PAD161
" 252 (BC_2, *, controlr, 1)," &
" 253 (BC_2, IO_L1, output3, X, 252, 1, Z)," & -- PAD160
" 254 (BC_2, IO_L1, input, X)," & -- PAD160
" 255 (BC_2, *, controlr, 1)," &
" 256 (BC_2, IO_L3, output3, X, 255, 1, Z)," & -- PAD159
" 257 (BC_2, IO_L3, input, X)," & -- PAD159
" 258 (BC_2, *, controlr, 1)," &
" 259 (BC_2, IO_M1, output3, X, 258, 1, Z)," & -- PAD158
" 260 (BC_2, IO_M1, input, X)," & -- PAD158
" 261 (BC_2, *, controlr, 1)," &
" 262 (BC_2, IO_M2, output3, X, 261, 1, Z)," & -- PAD157
" 263 (BC_2, IO_M2, input, X)," & -- PAD157
" 264 (BC_2, *, controlr, 1)," &
" 265 (BC_2, IO_N1, output3, X, 264, 1, Z)," & -- PAD156
" 266 (BC_2, IO_N1, input, X)," & -- PAD156
" 267 (BC_2, *, controlr, 1)," &
" 268 (BC_2, IO_N3, output3, X, 267, 1, Z)," & -- PAD155
" 269 (BC_2, IO_N3, input, X)," & -- PAD155
" 270 (BC_2, *, controlr, 1)," &
" 271 (BC_2, IO_P1, output3, X, 270, 1, Z)," & -- PAD154
" 272 (BC_2, IO_P1, input, X)," & -- PAD154
" 273 (BC_2, *, controlr, 1)," &
" 274 (BC_2, IO_P2, output3, X, 273, 1, Z)," & -- PAD153
" 275 (BC_2, IO_P2, input, X)," & -- PAD153
" 276 (BC_2, *, controlr, 1)," &
" 277 (BC_2, IO_R1, output3, X, 276, 1, Z)," & -- PAD152
" 278 (BC_2, IO_R1, input, X)," & -- PAD152
" 279 (BC_2, *, controlr, 1)," &
" 280 (BC_2, IO_R2, output3, X, 279, 1, Z)," & -- PAD151
" 281 (BC_2, IO_R2, input, X)," & -- PAD151
" 282 (BC_2, *, internal, 1)," & -- PAD150.T
" 283 (BC_2, *, internal, X)," & -- PAD150.O
" 284 (BC_2, *, internal, X)," & -- PAD150.I
" 285 (BC_2, *, internal, 1)," & -- PAD149.T
" 286 (BC_2, *, internal, X)," & -- PAD149.O
" 287 (BC_2, *, internal, X)," & -- PAD149.I
" 288 (BC_2, *, controlr, 1)," &
" 289 (BC_2, IO_N4, output3, X, 288, 1, Z)," & -- PAD148
" 290 (BC_2, IO_N4, input, X)," & -- PAD148
" 291 (BC_2, *, controlr, 1)," &
" 292 (BC_2, IO_M5, output3, X, 291, 1, Z)," & -- PAD147
" 293 (BC_2, IO_M5, input, X)," & -- PAD147
" 294 (BC_2, *, controlr, 1)," &
" 295 (BC_2, IO_M3, output3, X, 294, 1, Z)," & -- PAD146
" 296 (BC_2, IO_M3, input, X)," & -- PAD146
" 297 (BC_2, *, controlr, 1)," &
" 298 (BC_2, IO_M4, output3, X, 297, 1, Z)," & -- PAD145
" 299 (BC_2, IO_M4, input, X)," & -- PAD145
" 300 (BC_2, *, internal, 1)," & -- PROGRAM_B.T
" 301 (BC_2, *, internal, 1)," & -- PROGRAM_B.O
" 302 (BC_2, *, internal, 1)," & -- PROGRAM_B.I
" 303 (BC_2, *, controlr, 1)," &
" 304 (BC_2, IO_T3, output3, X, 303, 1, Z)," & -- PAD144
" 305 (BC_2, IO_T3, input, X)," & -- PAD144
" 306 (BC_2, *, controlr, 1)," &
" 307 (BC_2, IO_R3, output3, X, 306, 1, PULL1)," & -- PAD143
" 308 (BC_2, IO_R3, input, X)," & -- PAD143
" 309 (BC_2, *, controlr, 1)," &
" 310 (BC_2, IO_N6, output3, X, 309, 1, Z)," & -- PAD142
" 311 (BC_2, IO_N6, input, X)," & -- PAD142
" 312 (BC_2, *, controlr, 1)," &
" 313 (BC_2, IO_M6, output3, X, 312, 1, Z)," & -- PAD141
" 314 (BC_2, IO_M6, input, X)," & -- PAD141
" 315 (BC_2, *, controlr, 1)," &
" 316 (BC_2, IO_T4, output3, X, 315, 1, Z)," & -- PAD140
" 317 (BC_2, IO_T4, input, X)," & -- PAD140
" 318 (BC_2, *, controlr, 1)," &
" 319 (BC_2, IO_P4, output3, X, 318, 1, Z)," & -- PAD139
" 320 (BC_2, IO_P4, input, X)," & -- PAD139
" 321 (BC_2, *, controlr, 1)," &
" 322 (BC_2, IO_L7, output3, X, 321, 1, Z)," & -- PAD138
" 323 (BC_2, IO_L7, input, X)," & -- PAD138
" 324 (BC_2, *, controlr, 1)," &
" 325 (BC_2, IO_L8, output3, X, 324, 1, Z)," & -- PAD137
" 326 (BC_2, IO_L8, input, X)," & -- PAD137
" 327 (BC_2, *, controlr, 1)," &
" 328 (BC_2, IO_P5, output3, X, 327, 1, Z)," & -- PAD136
" 329 (BC_2, IO_P5, input, X)," & -- PAD136
" 330 (BC_2, *, controlr, 1)," &
" 331 (BC_2, IO_N5, output3, X, 330, 1, Z)," & -- PAD135
" 332 (BC_2, IO_N5, input, X)," & -- PAD135
" 333 (BC_2, *, controlr, 1)," &
" 334 (BC_2, IO_T5, output3, X, 333, 1, Z)," & -- PAD134
" 335 (BC_2, IO_T5, input, X)," & -- PAD134
" 336 (BC_2, *, controlr, 1)," &
" 337 (BC_2, IO_R5, output3, X, 336, 1, Z)," & -- PAD133
" 338 (BC_2, IO_R5, input, X)," & -- PAD133
" 339 (BC_2, *, controlr, 1)," &
" 340 (BC_2, IO_T6, output3, X, 339, 1, Z)," & -- PAD132
" 341 (BC_2, IO_T6, input, X)," & -- PAD132
" 342 (BC_2, *, controlr, 1)," &
" 343 (BC_2, IO_P6, output3, X, 342, 1, Z)," & -- PAD131
" 344 (BC_2, IO_P6, input, X)," & -- PAD131
" 345 (BC_2, *, internal, 1)," & -- PAD130.T
" 346 (BC_2, *, internal, X)," & -- PAD130.O
" 347 (BC_2, *, internal, X)," & -- PAD130.I
" 348 (BC_2, *, internal, 1)," & -- PAD129.T
" 349 (BC_2, *, internal, X)," & -- PAD129.O
" 350 (BC_2, *, internal, X)," & -- PAD129.I
" 351 (BC_2, *, internal, 1)," & -- PAD128.T
" 352 (BC_2, *, internal, X)," & -- PAD128.O
" 353 (BC_2, *, internal, X)," & -- PAD128.I
" 354 (BC_2, *, internal, 1)," & -- PAD127.T
" 355 (BC_2, *, internal, X)," & -- PAD127.O
" 356 (BC_2, *, internal, X)," & -- PAD127.I
" 357 (BC_2, *, internal, 1)," & -- PAD126.T
" 358 (BC_2, *, internal, X)," & -- PAD126.O
" 359 (BC_2, *, internal, X)," & -- PAD126.I
" 360 (BC_2, *, internal, 1)," & -- PAD125.T
" 361 (BC_2, *, internal, X)," & -- PAD125.O
" 362 (BC_2, *, internal, X)," & -- PAD125.I
" 363 (BC_2, *, controlr, 1)," &
" 364 (BC_2, IO_T7, output3, X, 363, 1, Z)," & -- PAD124
" 365 (BC_2, IO_T7, input, X)," & -- PAD124
" 366 (BC_2, *, controlr, 1)," &
" 367 (BC_2, IO_R7, output3, X, 366, 1, Z)," & -- PAD123
" 368 (BC_2, IO_R7, input, X)," & -- PAD123
" 369 (BC_2, *, controlr, 1)," &
" 370 (BC_2, IO_M7, output3, X, 369, 1, Z)," & -- PAD122
" 371 (BC_2, IO_M7, input, X)," & -- PAD122
" 372 (BC_2, *, controlr, 1)," &
" 373 (BC_2, IO_P7, output3, X, 372, 1, Z)," & -- PAD121
" 374 (BC_2, IO_P7, input, X)," & -- PAD121
" 375 (BC_2, *, controlr, 1)," &
" 376 (BC_2, IO_T8, output3, X, 375, 1, Z)," & -- PAD120
" 377 (BC_2, IO_T8, input, X)," & -- PAD120
" 378 (BC_2, *, controlr, 1)," &
" 379 (BC_2, IO_P8, output3, X, 378, 1, Z)," & -- PAD119
" 380 (BC_2, IO_P8, input, X)," & -- PAD119
" 381 (BC_2, *, controlr, 1)," &
" 382 (BC_2, IO_N8, output3, X, 381, 1, Z)," & -- PAD118
" 383 (BC_2, IO_N8, input, X)," & -- PAD118
" 384 (BC_2, *, controlr, 1)," &
" 385 (BC_2, IO_M9, output3, X, 384, 1, Z)," & -- PAD117
" 386 (BC_2, IO_M9, input, X)," & -- PAD117
" 387 (BC_2, *, controlr, 1)," &
" 388 (BC_2, IO_M10, output3, X, 387, 1, Z)," & -- PAD116
" 389 (BC_2, IO_M10, input, X)," & -- PAD116
" 390 (BC_2, *, controlr, 1)," &
" 391 (BC_2, IO_L10, output3, X, 390, 1, Z)," & -- PAD115
" 392 (BC_2, IO_L10, input, X)," & -- PAD115
" 393 (BC_2, *, controlr, 1)," &
" 394 (BC_2, IO_T9, output3, X, 393, 1, Z)," & -- PAD114
" 395 (BC_2, IO_T9, input, X)," & -- PAD114
" 396 (BC_2, *, controlr, 1)," &
" 397 (BC_2, IO_R9, output3, X, 396, 1, Z)," & -- PAD113
" 398 (BC_2, IO_R9, input, X)," & -- PAD113
" 399 (BC_2, *, controlr, 1)," &
" 400 (BC_2, IO_P9, output3, X, 399, 1, Z)," & -- PAD112
" 401 (BC_2, IO_P9, input, X)," & -- PAD112
" 402 (BC_2, *, controlr, 1)," &
" 403 (BC_2, IO_N9, output3, X, 402, 1, Z)," & -- PAD111
" 404 (BC_2, IO_N9, input, X)," & -- PAD111
" 405 (BC_2, *, controlr, 1)," &
" 406 (BC_2, IO_P11, output3, X, 405, 1, Z)," & -- PAD110
" 407 (BC_2, IO_P11, input, X)," & -- PAD110
" 408 (BC_2, *, controlr, 1)," &
" 409 (BC_2, IO_N11, output3, X, 408, 1, PULL1)," & -- PAD109
" 410 (BC_2, IO_N11, input, X)," & -- PAD109
" 411 (BC_2, *, controlr, 1)," &
" 412 (BC_2, IO_P12, output3, X, 411, 1, Z)," & -- PAD108
" 413 (BC_2, IO_P12, input, X)," & -- PAD108
" 414 (BC_2, *, controlr, 1)," &
" 415 (BC_2, IO_N12, output3, X, 414, 1, Z)," & -- PAD107
" 416 (BC_2, IO_N12, input, X)," & -- PAD107
" 417 (BC_2, *, controlr, 1)," &
" 418 (BC_2, IO_T10, output3, X, 417, 1, Z)," & -- PAD106
" 419 (BC_2, IO_T10, input, X)," & -- PAD106
" 420 (BC_2, *, controlr, 1)," &
" 421 (BC_2, IO_P10, output3, X, 420, 1, Z)," & -- PAD105
" 422 (BC_2, IO_P10, input, X)," & -- PAD105
" 423 (BC_2, *, controlr, 1)," &
" 424 (BC_2, IO_M11, output3, X, 423, 1, Z)," & -- PAD104
" 425 (BC_2, IO_M11, input, X)," & -- PAD104
" 426 (BC_2, *, controlr, 1)," &
" 427 (BC_2, IO_M12, output3, X, 426, 1, Z)," & -- PAD103
" 428 (BC_2, IO_M12, input, X)," & -- PAD103
" 429 (BC_2, *, controlr, 1)," &
" 430 (BC_2, IO_T11, output3, X, 429, 1, PULL1)," & -- PAD102
" 431 (BC_2, IO_T11, input, X)," & -- PAD102
" 432 (BC_2, *, controlr, 1)," &
" 433 (BC_2, IO_R11, output3, X, 432, 1, Z)," & -- PAD101
" 434 (BC_2, IO_R11, input, X)," & -- PAD101
" 435 (BC_2, *, controlr, 1)," &
" 436 (BC_2, DONE, output3, X, 435, 1, PULL1)," & -- DONE_2
" 437 (BC_2, DONE, input, X)," & -- DONE_2
" 438 (BC_2, *, internal, 1)," & -- CMPCS_B.T
" 439 (BC_2, *, internal, 1)," & -- CMPCS_B.O
" 440 (BC_2, CMPCS_B, input, X)," & -- CMPCS_B_2
" 441 (BC_2, *, internal, 1)," & -- SUSPEND.T
" 442 (BC_2, *, internal, 1)," & -- SUSPEND.O
" 443 (BC_2, SUSPEND, input, X)," &
" 444 (BC_2, *, controlr, 1)," &
" 445 (BC_2, IO_M14, output3, X, 444, 1, Z)," & -- PAD100
" 446 (BC_2, IO_M14, input, X)," & -- PAD100
" 447 (BC_2, *, controlr, 1)," &
" 448 (BC_2, IO_M13, output3, X, 447, 1, Z)," & -- PAD99
" 449 (BC_2, IO_M13, input, X)," & -- PAD99
" 450 (BC_2, *, internal, 1)," & -- PAD98.T
" 451 (BC_2, *, internal, X)," & -- PAD98.O
" 452 (BC_2, *, internal, X)," & -- PAD98.I
" 453 (BC_2, *, internal, 1)," & -- PAD97.T
" 454 (BC_2, *, internal, X)," & -- PAD97.O
" 455 (BC_2, *, internal, X)," & -- PAD97.I
" 456 (BC_2, *, controlr, 1)," &
" 457 (BC_2, IO_L13, output3, X, 456, 1, Z)," & -- PAD96
" 458 (BC_2, IO_L13, input, X)," & -- PAD96
" 459 (BC_2, *, controlr, 1)," &
" 460 (BC_2, IO_L12, output3, X, 459, 1, Z)," & -- PAD95
" 461 (BC_2, IO_L12, input, X)," & -- PAD95
" 462 (BC_2, *, controlr, 1)," &
" 463 (BC_2, IO_T12, output3, X, 462, 1, Z)," & -- PAD94
" 464 (BC_2, IO_T12, input, X)," & -- PAD94
" 465 (BC_2, *, controlr, 1)," &
" 466 (BC_2, IO_R12, output3, X, 465, 1, Z)," & -- PAD93
" 467 (BC_2, IO_R12, input, X)," & -- PAD93
" 468 (BC_2, *, controlr, 1)," &
" 469 (BC_2, IO_T13, output3, X, 468, 1, Z)," & -- PAD92
" 470 (BC_2, IO_T13, input, X)," & -- PAD92
" 471 (BC_2, *, controlr, 1)," &
" 472 (BC_2, IO_T14, output3, X, 471, 1, Z)," & -- PAD91
" 473 (BC_2, IO_T14, input, X)," & -- PAD91
" 474 (BC_2, *, controlr, 1)," &
" 475 (BC_2, IO_T15, output3, X, 474, 1, Z)," & -- PAD90
" 476 (BC_2, IO_T15, input, X)," & -- PAD90
" 477 (BC_2, *, controlr, 1)," &
" 478 (BC_2, IO_R14, output3, X, 477, 1, Z)," & -- PAD89
" 479 (BC_2, IO_R14, input, X)," & -- PAD89
" 480 (BC_2, *, controlr, 1)," &
" 481 (BC_2, IO_R16, output3, X, 480, 1, Z)," & -- PAD88
" 482 (BC_2, IO_R16, input, X)," & -- PAD88
" 483 (BC_2, *, controlr, 1)," &
" 484 (BC_2, IO_R15, output3, X, 483, 1, Z)," & -- PAD87
" 485 (BC_2, IO_R15, input, X)," & -- PAD87
" 486 (BC_2, *, controlr, 1)," &
" 487 (BC_2, IO_P16, output3, X, 486, 1, Z)," & -- PAD86
" 488 (BC_2, IO_P16, input, X)," & -- PAD86
" 489 (BC_2, *, controlr, 1)," &
" 490 (BC_2, IO_P15, output3, X, 489, 1, Z)," & -- PAD85
" 491 (BC_2, IO_P15, input, X)," & -- PAD85
" 492 (BC_2, *, controlr, 1)," &
" 493 (BC_2, IO_L16, output3, X, 492, 1, Z)," & -- PAD84
" 494 (BC_2, IO_L16, input, X)," & -- PAD84
" 495 (BC_2, *, controlr, 1)," &
" 496 (BC_2, IO_L14, output3, X, 495, 1, Z)," & -- PAD83
" 497 (BC_2, IO_L14, input, X)," & -- PAD83
" 498 (BC_2, *, controlr, 1)," &
" 499 (BC_2, IO_M16, output3, X, 498, 1, Z)," & -- PAD82
" 500 (BC_2, IO_M16, input, X)," & -- PAD82
" 501 (BC_2, *, controlr, 1)," &
" 502 (BC_2, IO_M15, output3, X, 501, 1, Z)," & -- PAD81
" 503 (BC_2, IO_M15, input, X)," & -- PAD81
" 504 (BC_2, *, controlr, 1)," &
" 505 (BC_2, IO_N16, output3, X, 504, 1, Z)," & -- PAD80
" 506 (BC_2, IO_N16, input, X)," & -- PAD80
" 507 (BC_2, *, controlr, 1)," &
" 508 (BC_2, IO_N14, output3, X, 507, 1, Z)," & -- PAD79
" 509 (BC_2, IO_N14, input, X)," & -- PAD79
" 510 (BC_2, *, controlr, 1)," &
" 511 (BC_2, IO_K16, output3, X, 510, 1, Z)," & -- PAD78
" 512 (BC_2, IO_K16, input, X)," & -- PAD78
" 513 (BC_2, *, controlr, 1)," &
" 514 (BC_2, IO_K15, output3, X, 513, 1, Z)," & -- PAD77
" 515 (BC_2, IO_K15, input, X)," & -- PAD77
" 516 (BC_2, *, controlr, 1)," &
" 517 (BC_2, IO_J16, output3, X, 516, 1, Z)," & -- PAD76
" 518 (BC_2, IO_J16, input, X)," & -- PAD76
" 519 (BC_2, *, controlr, 1)," &
" 520 (BC_2, IO_J14, output3, X, 519, 1, Z)," & -- PAD75
" 521 (BC_2, IO_J14, input, X)," & -- PAD75
" 522 (BC_2, *, controlr, 1)," &
" 523 (BC_2, IO_K11, output3, X, 522, 1, Z)," & -- PAD74
" 524 (BC_2, IO_K11, input, X)," & -- PAD74
" 525 (BC_2, *, controlr, 1)," &
" 526 (BC_2, IO_K12, output3, X, 525, 1, Z)," & -- PAD73
" 527 (BC_2, IO_K12, input, X)," & -- PAD73
" 528 (BC_2, *, controlr, 1)," &
" 529 (BC_2, IO_K14, output3, X, 528, 1, Z)," & -- PAD72
" 530 (BC_2, IO_K14, input, X)," & -- PAD72
" 531 (BC_2, *, controlr, 1)," &
" 532 (BC_2, IO_J13, output3, X, 531, 1, Z)," & -- PAD71
" 533 (BC_2, IO_J13, input, X)," & -- PAD71
" 534 (BC_2, *, controlr, 1)," &
" 535 (BC_2, IO_J12, output3, X, 534, 1, Z)," & -- PAD70
" 536 (BC_2, IO_J12, input, X)," & -- PAD70
" 537 (BC_2, *, controlr, 1)," &
" 538 (BC_2, IO_J11, output3, X, 537, 1, Z)," & -- PAD69
" 539 (BC_2, IO_J11, input, X)," & -- PAD69
" 540 (BC_2, *, controlr, 1)," &
" 541 (BC_2, IO_H14, output3, X, 540, 1, Z)," & -- PAD68
" 542 (BC_2, IO_H14, input, X)," & -- PAD68
" 543 (BC_2, *, controlr, 1)," &
" 544 (BC_2, IO_H13, output3, X, 543, 1, Z)," & -- PAD67
" 545 (BC_2, IO_H13, input, X)," & -- PAD67
" 546 (BC_2, *, controlr, 1)," &
" 547 (BC_2, IO_H11, output3, X, 546, 1, Z)," & -- PAD66
" 548 (BC_2, IO_H11, input, X)," & -- PAD66
" 549 (BC_2, *, controlr, 1)," &
" 550 (BC_2, IO_G12, output3, X, 549, 1, Z)," & -- PAD65
" 551 (BC_2, IO_G12, input, X)," & -- PAD65
" 552 (BC_2, *, controlr, 1)," &
" 553 (BC_2, IO_H16, output3, X, 552, 1, Z)," & -- PAD64
" 554 (BC_2, IO_H16, input, X)," & -- PAD64
" 555 (BC_2, *, controlr, 1)," &
" 556 (BC_2, IO_H15, output3, X, 555, 1, Z)," & -- PAD63
" 557 (BC_2, IO_H15, input, X)," & -- PAD63
" 558 (BC_2, *, controlr, 1)," &
" 559 (BC_2, IO_G16, output3, X, 558, 1, Z)," & -- PAD62
" 560 (BC_2, IO_G16, input, X)," & -- PAD62
" 561 (BC_2, *, controlr, 1)," &
" 562 (BC_2, IO_G14, output3, X, 561, 1, Z)," & -- PAD61
" 563 (BC_2, IO_G14, input, X)," & -- PAD61
" 564 (BC_2, *, controlr, 1)," &
" 565 (BC_2, IO_F16, output3, X, 564, 1, Z)," & -- PAD60
" 566 (BC_2, IO_F16, input, X)," & -- PAD60
" 567 (BC_2, *, controlr, 1)," &
" 568 (BC_2, IO_F15, output3, X, 567, 1, Z)," & -- PAD59
" 569 (BC_2, IO_F15, input, X)," & -- PAD59
" 570 (BC_2, *, controlr, 1)," &
" 571 (BC_2, IO_E16, output3, X, 570, 1, Z)," & -- PAD58
" 572 (BC_2, IO_E16, input, X)," & -- PAD58
" 573 (BC_2, *, controlr, 1)," &
" 574 (BC_2, IO_E15, output3, X, 573, 1, Z)," & -- PAD57
" 575 (BC_2, IO_E15, input, X)," & -- PAD57
" 576 (BC_2, *, controlr, 1)," &
" 577 (BC_2, IO_C16, output3, X, 576, 1, Z)," & -- PAD56
" 578 (BC_2, IO_C16, input, X)," & -- PAD56
" 579 (BC_2, *, controlr, 1)," &
" 580 (BC_2, IO_C15, output3, X, 579, 1, Z)," & -- PAD55
" 581 (BC_2, IO_C15, input, X)," & -- PAD55
" 582 (BC_2, *, controlr, 1)," &
" 583 (BC_2, IO_F14, output3, X, 582, 1, Z)," & -- PAD54
" 584 (BC_2, IO_F14, input, X)," & -- PAD54
" 585 (BC_2, *, controlr, 1)," &
" 586 (BC_2, IO_F13, output3, X, 585, 1, Z)," & -- PAD53
" 587 (BC_2, IO_F13, input, X)," & -- PAD53
" 588 (BC_2, *, controlr, 1)," &
" 589 (BC_2, IO_D16, output3, X, 588, 1, Z)," & -- PAD52
" 590 (BC_2, IO_D16, input, X)," & -- PAD52
" 591 (BC_2, *, controlr, 1)," &
" 592 (BC_2, IO_D14, output3, X, 591, 1, Z)," & -- PAD51
" 593 (BC_2, IO_D14, input, X)," & -- PAD51
" 594 (BC_2, *, controlr, 1)," &
" 595 (BC_2, IO_G11, output3, X, 594, 1, Z)," & -- PAD50
" 596 (BC_2, IO_G11, input, X)," & -- PAD50
" 597 (BC_2, *, controlr, 1)," &
" 598 (BC_2, IO_F12, output3, X, 597, 1, Z)," & -- PAD49
" 599 (BC_2, IO_F12, input, X)," & -- PAD49
" 600 (BC_2, *, controlr, 1)," &
" 601 (BC_2, IO_B16, output3, X, 600, 1, Z)," & -- PAD48
" 602 (BC_2, IO_B16, input, X)," & -- PAD48
" 603 (BC_2, *, controlr, 1)," &
" 604 (BC_2, IO_B15, output3, X, 603, 1, Z)," & -- PAD47
" 605 (BC_2, IO_B15, input, X)," & -- PAD47
" 606 (BC_2, *, controlr, 1)," &
" 607 (BC_2, IO_E12, output3, X, 606, 1, Z)," & -- PAD46
" 608 (BC_2, IO_E12, input, X)," & -- PAD46
" 609 (BC_2, *, controlr, 1)," &
" 610 (BC_2, IO_E13, output3, X, 609, 1, Z)," & -- PAD45
" 611 (BC_2, IO_E13, input, X)"; -- PAD45
-- Design Warning Section
attribute DESIGN_WARNING of XC6SLX9L_FTG256 : entity is
"This is a preliminary BSDL file which has not been verified." &
"When no bitstream is loaded and GTPs are not instantiated," &
"the boundary-scan cells associated with GTPs will not" &
"capture correct state information. To model the boundary-" &
"scan cell behavior correctly post-configuration, use" &
"BSDLanno to modify the BSDL file." &
"This BSDL file must be modified by the FPGA designer in order to" &
"reflect post-configuration behavior (if any)." &
"To avoid losing the current configuration, the boundary scan" &
"test vectors should keep the PROGRAM_B pin" &
"high. If the PROGRAM_B pin goes low by any means," &
"the configuration will be cleared." &
"PROGRAM_B, HSWAPEN, M0, and M1 can only be captured, not updated." &
"The value at the pin is always used by the device." &
"The disable result of a 3-stated I/O in this file" &
"corresponds to HSWAPEN being high. If HSWAPEN" &
"is low, every Z should be changed to PULL1." &
"In EXTEST, output and tristate values are not captured in the" &
"Capture-DR state - those register cells are unchanged." &
"In INTEST, the pin input values are not captured in the" &
"Capture-DR state - those register cells are unchanged." &
"The output and tristate capture values are not valid until after" &
"the device is configured." &
"The tristate control value is not captured properly when" &
"GTS is activated." &
"NOCONNECT pins should not be connected to any supply" &
"or GND. They should be left floating.";
end XC6SLX9L_FTG256;