-- Advanced Micro Devices MACH211 44 Pin PLCC/TQFP BSDL description
--
-- Written By: Martha Chan
-- Date : October 12, 1995
-- Version : 1.0
-- 03/31/2000 (jkb): updated Copyright comments.
-- ****************************************************************
-- * Copyright 1999, 2000 Lattice/Vantis Corporation *
-- * 995 Stewart Dr. Sunnyvale, Ca 94088 *
-- * All rights reserved. No part of this program or publication*
-- * may be reproduced, transmitted, transcribed, stored in a *
-- * retrieval system, or translated into any language or *
-- * computer language, in any form or by any means without this *
-- * notice appearing within. *
-- ****************************************************************
-- * Lattice/Vantis makes no warranty for the use of this *
-- * product and assumes no responsibility for any errors which *
-- * may appear within. Neither does it make a commitment to *
-- * update this information. *
-- ****************************************************************
-- * This is the template BSDL file to be used for the purpose *
-- * of verifying the part's compliance with the IEEE standard *
-- * 1149.1-1990. *
-- ****************************************************************
--
-- This file has NOT yet been verified by:
-- Teradyne VICTORY v 2.10
-- - Syntax Check using BSA
-- - Test vector generation using BSA
--
-- Hewlett-Packard Boundary-Scan Software
-- - Syntax Check
--
-- Genrad Boundary-Scan Software
-- - Syntax Check
-- - Physical Verification
--
-- ****************************************************************
entity AMD_MACH211i is
generic(PHYSICAL_PIN_MAP : string := "UNDEFINED");
port (
DED_IN : in bit_vector(0 to 1); -- Clocks/Inputs
IO : inout bit_vector(0 to 31); -- I/O pins
TCK, TMS, TDI: in bit; -- JTAG inputs
TDO : out bit; -- JTAG outputs
VCC : linkage bit_vector(0 to 1);
GND : linkage bit_vector(0 to 3)
);
use STD_1149_1_1990.all; -- get JTAG definitions and attributes
attribute PIN_MAP of AMD_MACH211i : entity is PHYSICAL_PIN_MAP;
constant PLCC_44pin : PIN_MAP_STRING :=
"DED_IN:(11,33), " & -- Dedicated Clock/Input Pins
"IO:( 2, 3, 4, 5, 6, 7, 8, 9, " & -- I/O A
" 14, 15, 16, 17, 18, 19, 20, 21, " & -- I/O B
" 24, 25, 26, 27, 28, 29, 30, 31, " & -- I/O C
" 36, 37, 38, 39, 40, 41, 42, 43)," & -- I/O D
" TDI:10, TMS:32, TCK:13, TDO:35, " & -- JTAG
"VCC:(22,44), " & -- POWER
"GND:(1,12,23,34)"; -- GROUND PINS/END OF PIN DEFINITION
constant TQFP_44pin : PIN_MAP_STRING :=
"DED_IN:( 5,27), " & -- Dedicated Clock/Input Pins
"IO:( 40, 41, 42, 43, 44, 1, 2, 3, " & -- I/O A
" 8, 9, 10, 11, 12, 13, 14, 15, " & -- I/O B
" 18, 19, 20, 21, 22, 23, 24, 25, " & -- I/O C
" 30, 31, 32, 33, 34, 35, 36, 37)," & -- I/O D
" TDI: 4, TMS:26, TCK: 7, TDO:29, " & -- JTAG
"VCC:(16,38), " & -- POWER
"GND:(6,17,28,39)"; -- GROUND PINS/END OF PIN DEFINITION
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (20.0e6, BOTH);
-- Instruction register definitions
attribute INSTRUCTION_LENGTH of AMD_MACH211i : entity is 6;
attribute INSTRUCTION_OPCODE of AMD_MACH211i : entity is
"BYPASS (111111)," &
"EXTEST (000000)," &
"SAMPLE (000010)," &
"IDCODE (000001)," &
"PRIVATE (000101,000110,000111,001000,000011,000100," &
"001110,001101,001111,110000,100101,100110," &
"100111,101110,110011,110010)";
attribute INSTRUCTION_CAPTURE of AMD_MACH211i : entity is "000001";
attribute INSTRUCTION_PRIVATE of AMD_MACH211i : entity is "PRIVATE";
attribute IDCODE_REGISTER of AMD_MACH211i : entity is
"0000" & -- version number
"0111000001011000" & -- part identification
"00000000001" & -- company code
"1"; -- mandatory 1
attribute REGISTER_ACCESS of AMD_MACH211i : entity is
"BYPASS (BYPASS)," &
"BOUNDARY (EXTEST,SAMPLE)";
-- **************************************************************
-- * BOUNDARY SCAN CELL REGISTER DESCRIPTION
-- * MACH2xx-ISP parts do not have boundary scan cells.
-- **************************************************************
attribute BOUNDARY_CELLS of AMD_MACH211i : entity is "BC_3";
attribute BOUNDARY_LENGTH of AMD_MACH211i : entity is 1;
attribute BOUNDARY_REGISTER of AMD_MACH211i: entity is
" 0 (BC_3, *, INTERNAL, X )";
end AMD_MACH211i;