This BSDL contains syntax errors!
-------------------------------------------------------------------------------
-- BSDL for ISSI 2Mx36 QUAD-B4
-- IBM Microelectronics
-- Copyright(c) 2006
-- Created on: Aug. 06. 2009
-- Rev.0 (Aug/06/09) : Initial Release.
-- v1.0 Preliminary release
-- Model : ISSI QUAD Burst 2
-- Parameter : Selection between x36
-- x36 PHYSICAL_PIN_MAP = IS61QDB42M36
-- PHYS_BOUNDARY_SCAN = IS61QDB42M36_BD
--
-------------------------------------------------------------------------------
entity ISSI_QUAD is
generic (PHYSICAL_PIN_MAP : string := "IS61QDB42M36");
port (
TDO : out bit;
TMS : in bit;
TDI : in bit;
TCK : in bit;
ZQ : in bit;
VSS : linkage bit_vector(0 to 24);
VDDQ : linkage bit_vector(0 to 15);
VDD : linkage bit_vector(0 to 9);
VREF : linkage bit_vector(0 to 1);
BWN : in bit_vector(0 to 3);
RN : in bit;
WN : in bit;
Q : buffer bit_vector(0 to 35);
D : in bit_vector(0 to 35);
SA : in bit_vector(1 to 19);
DOFFN : in bit;
CQ : buffer bit;
CQN : buffer bit;
C : in bit;
CN : in bit;
K : in bit;
KN : in bit;
NC : linkage bit_vector (1 to 3));
use STD_1149_1_2001.all ;
attribute COMPONENT_CONFORMANCE of ISSI_QUAD: entity is "STD_1149_1_2001";
attribute PIN_MAP of ISSI_QUAD : entity is PHYSICAL_PIN_MAP;
constant IS61QDB42M36 : PIN_MAP_STRING :=
"TDO:R1, " &
"TMS:R10, " &
"TDI:R11, " &
"TCK:R2, " &
"ZQ:H11, " &
"VSS:(C4, C8, D4, D5, D6, D7, D8, E5, E6, E7, " &
" F6, G6, H6, J6, K6, L5, L6, L7, M4, M5, " &
" M6, M7, M8, N4, N8), " &
"VDDQ:(E4, E8, F4, F8, G4, G8, H3, H4, H8, H9, " &
" J4, J8, K4, K8, L4, L8), " &
"VDD: (F5, F7, G5, G7, H5, H7, J5, J7, K5, K7), " &
"VREF:(H2, H10), " &
"BWN: (B7, A7, A5, B5), " &
"RN:A8, " &
"WN:A4, " &
"Q:( P11 , M10 , L11 , K11 , J10 , F11 , E11 , C10 , B11 , " &
" P9 , N9 , L10 , K9 , G9 , F10 , E9 , D9 , B10 , " &
" B2 , D3 , E3 , F2 , G3 , K3 , L2 , N3 , P3 , " &
" B1 , C2 , E1 , F1 , J2 , K1 , L1 , M2 , P1 ) , " &
"D:( P10 , N11 , M11 , K10 , J11 , G11 , E10 , D11 , C11 , " &
" N10 , M9 , L9 , J9 , G10 , F9 , D10 , C9 , B9 , " &
" B3 , C3 , D2 , F3 , G2 , J3 , L3 , M3 , N2 , " &
" C1 , D1 , E2 , G1 , J1 , K2 , M1 , N1 , P2 ) , " &
"SA:(C7 , B8 , N6 , R9 , R8 , R7 , P7 , P8 , N7 , " &
" C5 , B4 , R3 , R4 , P4 , R5 , P5 , N5 , A9 , A3 ), " &
"DOFFN:H1, " &
"CQ:A11, " &
"CQN:A1, " &
"C:P6, " &
"CN:R6, " &
"K:B6, " &
"KN:A6, "&
"NC : (A2, A10, C6) " ;
--Scan Port Identification
attribute TAP_SCAN_IN of TDI: signal is true;
attribute TAP_SCAN_MODE of TMS: signal is true;
attribute TAP_SCAN_OUT of TDO: signal is true;
attribute TAP_SCAN_CLOCK of TCK: signal is (20.0e6, BOTH);
-- TAP Description
attribute INSTRUCTION_LENGTH of ISSI_QUAD: entity is 3;
attribute INSTRUCTION_OPCODE of ISSI_QUAD: entity is
"EXTEST (000)," &
"IDCODE (001)," &
"SAMPLEZ (010)," &
"PRIVATE1 (011)," &
"SAMPLE (100)," &
"PRELOAD (100)," &
"PRIVATE2 (101)," &
"PRIVATE3 (110)," &
"BYPASS (111)";
attribute INSTRUCTION_CAPTURE of ISSI_QUAD: entity is "001";
attribute INSTRUCTION_PRIVATE of ISSI_QUAD: entity is "PRIVATE1 , PRIVATE2 , PRIVATE3";
attribute IDCODE_REGISTER of ISSI_QUAD: entity is
"000" & -- Revision Number
"00" & -- Reserved
"011" & -- def = 011 for 72Mb
"0" & -- Reserved
"11" & -- wx = 11 for x36, 10 for x18
"0" & -- Reserved
"X" & -- t = 1 for DLL, 0 for non-DLL, X controlled by DOFFN
"0" & -- Reserved
"1" & -- q = 1 for QDB2, 0 for DDRII
"0" & -- Reserved
"1" & -- b = 1 for burst of 4, 0 for burst of 2
"0" & -- Reserved
"1" & -- s = 1 for separate I/0, 0 for common I/O
"0" & -- Reserved Part Configuration ,
"00010100100" & -- ISSI JEDEC Code
"1"; -- Required by IEEE Std 1149.1-1990
attribute REGISTER_ACCESS of ISSI_QUAD: entity is "BOUNDARY (SAMPLEZ) ";
attribute BOUNDARY_LENGTH of ISSI_QUAD: entity is 109;
attribute BOUNDARY_REGISTER of ISSI_QUAD: entity is
--num cell port function safe [ccell disval rslt]
"0 (BC_4, CN, INPUT, X)," &
"1 (BC_4, C, INPUT, X)," &
"2 (BC_4, SA(3), INPUT, X)," &
"3 (BC_4, SA(7), INPUT, X)," &
"4 (BC_4, SA(9), INPUT, X)," &
"5 (BC_4, SA(6), INPUT, X)," &
"6 (BC_4, SA(5), INPUT, X)," &
"7 (BC_4, SA(8), INPUT, X)," &
"8 (BC_4, SA(4), INPUT, X)," &
"9 (BC_9, Q(0), output2, X)," &
"10 (BC_4, D(0), INPUT, X)," &
"11 (BC_4, D(9), INPUT, X)," &
"12 (BC_9, Q(9), output2, X)," &
"13 (BC_9, Q(1), output2, X)," &
"14 (BC_4, D(1), INPUT, X)," &
"15 (BC_4, D(10), INPUT, X)," &
"16 (BC_9, Q(10), output2, X)," &
"17 (BC_9, Q(2), output2, X)," &
"18 (BC_4, D(2), INPUT, X)," &
"19 (BC_4, D(11), INPUT, X)," &
"20 (BC_9, Q(11), output2, X)," &
"21 (BC_9, Q(3), output2, X)," &
"22 (BC_4, D(3), INPUT, X)," &
"23 (BC_4, D(12), INPUT, X)," &
"24 (BC_9, Q(12), output2, X)," &
"25 (BC_9, Q(4), output2, X)," &
"26 (BC_4, D(4), INPUT, X)," &
"27 (BC_4, ZQ, INPUT, X)," &
"28 (BC_4, D(13), INPUT, X)," &
"29 (BC_9, Q(13), output2, X)," &
"30 (BC_9, Q(5), output2, X)," &
"31 (BC_4, D(5), INPUT, X)," &
"32 (BC_4, D(14), INPUT, X)," &
"33 (BC_9, Q(14), output2, X)," &
"34 (BC_9, Q(6), output2, X)," &
"35 (BC_4, D(6), INPUT, X)," &
"36 (BC_4, D(15), INPUT, X)," &
"37 (BC_9, Q(15), output2, X)," &
"38 (BC_9, Q(7), output2, X)," &
"39 (BC_4, D(7), INPUT, X)," &
"40 (BC_4, D(16), INPUT, X)," &
"41 (BC_9, Q(16), output2, X)," &
"42 (BC_9, Q(8), output2, X)," &
"43 (BC_4, D(8), INPUT, X)," &
"44 (BC_4, D(17), INPUT, X)," &
"45 (BC_9, Q(17), output2, X)," &
"46 (BC_9, CQ, output2, X)," &
"47 (BC_1, *, INTERNAL, X)," &
"48 (BC_4, SA(18), INPUT, X)," &
"49 (BC_4, SA(2), INPUT, X)," &
"50 (BC_4, SA(1), INPUT, X)," &
"51 (BC_4, *, INTERNAL, X)," & -- C6 becomes NC for B4, SA(1) for B2
"52 (BC_4, RN, INPUT, X)," &
"53 (BC_4, BWN(1), INPUT, X)," &
"54 (BC_4, BWN(0), INPUT, X)," &
"55 (BC_4, K, INPUT, X)," &
"56 (BC_4, KN, INPUT, X)," &
"57 (BC_4, BWN(3), INPUT, X)," &
"58 (BC_4, BWN(2), INPUT, X)," &
"59 (BC_4, WN, INPUT, X)," &
"60 (BC_4, SA(10), INPUT, X)," &
"61 (BC_4, SA(11), INPUT, X)," &
"62 (BC_4, SA(19), INPUT, X)," & -- 72M
"63 (BC_1, *, INTERNAL, X)," &
"64 (BC_9, CQN, output2, X)," &
"65 (BC_9, Q(18), output2, X)," &
"66 (BC_4, D(18), INPUT, X)," &
"67 (BC_4, D(27), INPUT, X)," &
"68 (BC_9, Q(27), output2, X)," &
"69 (BC_9, Q(19), output2, X)," &
"70 (BC_4, D(19), INPUT, X)," &
"71 (BC_4, D(28), INPUT, X)," &
"72 (BC_9, Q(28), output2, X)," &
"73 (BC_9, Q(20), output2, X)," &
"74 (BC_4, D(20), INPUT, X)," &
"75 (BC_4, D(29), INPUT, X)," &
"76 (BC_9, Q(29), output2, X)," &
"77 (BC_9, Q(21), output2, X)," &
"78 (BC_4, D(21), INPUT, X)," &
"79 (BC_4, D(30), INPUT, X)," &
"80 (BC_9, Q(30), output2, X)," &
"81 (BC_9, Q(22), output2, X)," &
"82 (BC_4, D(22), INPUT, X)," &
"83 (BC_4, DOFFN, INPUT, X)," &
"84 (BC_4, D(31), INPUT, X)," &
"85 (BC_9, Q(31), output2, X)," &
"86 (BC_9, Q(23), output2, X)," &
"87 (BC_4, D(23), INPUT, X)," &
"88 (BC_4, D(32), INPUT, X)," &
"89 (BC_9, Q(32), output2, X)," &
"90 (BC_9, Q(24), output2, X)," &
"91 (BC_4, D(24), INPUT, X)," &
"92 (BC_4, D(33), INPUT, X)," &
"93 (BC_9, Q(33), output2, X)," &
"94 (BC_9, Q(25), output2, X)," &
"95 (BC_4, D(25), INPUT, X)," &
"96 (BC_4, D(34), INPUT, X)," &
"97 (BC_9, Q(34), output2, X)," &
"98 (BC_9, Q(26), output2, X)," &
"99 (BC_4, D(26), INPUT, X)," &
"100 (BC_4, D(35), INPUT, X)," &
"101 (BC_9, Q(35), output2, X)," &
"102 (BC_4, SA(12), INPUT, X)," &
"103 (BC_4, SA(13), INPUT, X)," &
"104 (BC_4, SA(14), INPUT, X)," &
"105 (BC_4, SA(16), INPUT, X)," &
"106 (BC_4, SA(17), INPUT, X)," &
"107 (BC_4, SA(15), INPUT, X)," &
"108 (BC_1, *, INTERNAL, X)" ;
attribute DESIGN_WARNING of ISSI_QUAD: entity is
"The SRAM provides a limited set of JTAG functions to test the interconnection " &
"between SRAM I/Os and printed circuit board traces or other components. There " &
"is no multiplexer in the path from I/O pins to the RAM core.";
end ISSI_QUAD ;