BSDL Files Library for JTAG

The only free public library that contains thousands of BSDL (Boundary Scan Description Language) models to use with BScan/JTAG tools

BSDL model: ZL30100


-- **********************************************************************
--
--  FILE :  zl30100qdc.bsd
--  generated by Cz.P. as zl30100 on Tue Mar  9 14:18:09 EST 2004
--  using p.jtag.bsd rev 3.3 July 18, 2003
--
--  BSDL description for top level entity zl30100
--  Device  :  ZL30100  DS1/E1 System Synchronizer
--  Package :  64-pin TQFP
-- 
--  Number of BSC cells: 58
-- 
-- **********************************************************************
--  Modification History:
--       Initial release:   Tue Mar  9 14:18:09 EST 2004
--  ********************************************************************
--
--                        IMPORTANT NOTICE
--
--  This information is for modeling purposes only, and is not guaranteed.
--
--  This information is provided "as is" without warranty of any kind.
--  It may contain technical inaccuracies or typographical errors.
--
--  ZARLINK and ZL30100 are trademarks of ZARLINK Semiconductor. ZARLINK
--  products, marketed under trademarks, are protected under numerous US
--  and foreign patents and pending applications,  maskwork rights,  and
--  copyrights.
--
--  ZARLINK reserves the right to make changes to any products and 
--  services at any time without notice.  ZARLINK assumes no
--  responsibility or liability arising out of the application or use of
--  any information, product, or service described herein except as
--  expressly agreed to in writing by ZARLINK Corporation. ZARLINK 
--  customers are advised to obtain the latest version of device 
--  specifications before relying on any published information and before
--  placing orders for products or services.
--

--  ********************************************************************
--
--                             SPECIAL NOTES
--
--    1. All instruction opcodes other than those defined in this file
--       should be considered PRIVATE.
--
--    2. Pins IC_GRD(1 to 4): {59,27,28,52} should be tied to GROUND
--       for normal operation.
--
--    3. Pins NC_OPEN1 and NC_OPEN2: {22,6} are internal connects, and
--       they should be kept open for normal operation.
--
--    4. Pins NC(1 to 9): {24,30,31,38,39,54,56,58,62} are No Connects
--       (nothing is bonded out to them).
--
--  ********************************************************************



entity zl30100 is

  generic(PHYSICAL_PIN_MAP : string := "TQFP_PACKAGE");

port (
      	BW_SEL: in bit;
      	C16O_B: inout bit;
      	C1P5O: inout bit;
      	C2O: inout bit;
      	C4_65O_B: out bit;
      	C8_32O: out bit;
      	F16O_B: out bit;
      	F4_65O_B: out bit;
      	F8_32O: inout bit;
      	HMS: in bit;
      	HOLDOVER: out bit;
      	IC_GRD: linkage bit_vector (1 to 4);
      	LOCK: out bit;
     	MODE_SEL0: in bit;
      	MODE_SEL1: in bit;
      	NC: linkage bit_vector (1 to 9);
     	NC_OPEN1: linkage bit;
      	NC_OPEN2: linkage bit;
      	OOR_SEL: in bit;
      	OSCI: linkage bit;
      	OSCO: linkage bit;
      	OUT_SEL: in bit;
     	REF0: in bit;
      	REF1: in bit;
     	REF_FAIL0: out bit;
      	REF_FAIL1: out bit;
      	REF_SEL: inout bit;
      	RST_B: in bit;
      	TCK: in bit;
      	TDI: in bit;
      	TDO: out bit;
      	TIECLR_B: in bit;
      	TMS: in bit;
      	TRST_B: in bit;
      	AGND: linkage bit_vector (1 to 5);
      	AVDD: linkage bit_vector (1 to 5);
      	AVDD_CORE: linkage bit_vector (1 to 2);
      	GND: linkage bit_vector (1 to 3);
      	VDD: linkage bit_vector (1 to 2);
      	VDDCORE: linkage bit_vector (1 to 2)
);

 

  use STD_1149_1_2001.all;

  attribute COMPONENT_CONFORMANCE of zl30100 : entity is
        "STD_1149_1_2001";

  attribute PIN_MAP of zl30100 : entity is PHYSICAL_PIN_MAP;
  constant TQFP_PACKAGE : PIN_MAP_STRING :=
  "BW_SEL           : 64       , " &  
  "C16O_B           : 47       , " &  
  "C1P5O            : 32       , " &  
  "C2O              : 46       , " &  
  "C4_65O_B         : 42       , " &  
  "C8_32O           : 43       , " &  
  "F16O_B           : 50       , " &  
  "F4_65O_B         : 49       , " &  
  "F8_32O           : 48       , " &  
  "HMS              : 16       , " &  
  "HOLDOVER         : 4        , " &  
  "IC_GRD           :(59       , " & -- IC_GRD[1]       
                     "27       , " & -- IC_GRD[2]       
                     "28       , " & -- IC_GRD[3]       
                     "52      ), " & -- IC_GRD[4]       
  "LOCK             : 3        , " &  
  "MODE_SEL0        : 17       , " &  
  "MODE_SEL1        : 18       , " &  
  "NC               :(24       , " & -- NC[1]           
                     "30       , " & -- NC[2]           
                     "31       , " & -- NC[3]           
                     "38       , " & -- NC[4]           
                     "39       , " & -- NC[5]           
                     "54       , " & -- NC[6]           
                     "56       , " & -- NC[7]           
                     "58       , " & -- NC[8]           
                     "62      ), " & -- NC[9]           
  "NC_OPEN1         : 22       , " &  
  "NC_OPEN2         : 6        , " &  
  "OOR_SEL          : 60       , " &  
  "OSCI             : 21       , " &  
  "OSCO             : 20       , " &  
  "OUT_SEL          : 26       , " &  
  "REF0             : 55       , " &  
  "REF1             : 57       , " &  
  "REF_FAIL0        : 5        , " &  
  "REF_FAIL1        : 7        , " &  
  "REF_SEL          : 53       , " &  
  "RST_B            : 19       , " &  
  "TCK              : 11       , " &  
  "TDI              : 15       , " &  
  "TDO              : 8        , " &  
  "TIECLR_B         : 63       , " &  
  "TMS              : 9        , " &  
  "TRST_B           : 10       , " &  
  "AGND             :(33,   40,   41,   51,   34)," &
  "AVDD             :(29,   37,   44,   45,   36)," &
  "AVDD_CORE        :(14,   35)," &
  "GND              :(23,   1,    13)," &
  "VDD              :(61,   25)," &
  "VDDCORE          :(2,    12)";
   
  attribute TAP_SCAN_IN    of TDI     : signal is true;
  attribute TAP_SCAN_MODE  of TMS     : signal is true;
  attribute TAP_SCAN_OUT   of TDO     : signal is true;
  attribute TAP_SCAN_CLOCK of TCK     : signal is (10.0e6,BOTH);
  attribute TAP_SCAN_RESET of TRST_B  : signal is true;


--
-- NOTE:  All instruction opcodes other than those defined in this file
--        should be considered PRIVATE.
--

  attribute INSTRUCTION_LENGTH of zl30100 : entity is 16;
  attribute INSTRUCTION_OPCODE of zl30100 : entity is
    "bypass  (0000000000000000)," &
    "bypass  (1111111111111111)," &
    "sample  (1111111111111000)," &
    "preload (1111111111111000)," &
    "idcode  (1111111111111110)," &
    "highz   (1111111111001111)," &
    "clamp   (1111111111101111)," &
    "extest  (1111111111101000)";

  attribute INSTRUCTION_CAPTURE of zl30100 : entity is "xxxxxxxxxxxxxx01";

  attribute IDCODE_REGISTER of zl30100 : entity is
        "0000" & 		-- version
        "0111010110010100" &    -- part number
        "00010100101" &		-- manufacturer id
        "1";


  attribute REGISTER_ACCESS of zl30100 : entity is
    "boundary (extest, sample, preload)," &
    "bypass (bypass, highz, clamp)," &
    "device_id (idcode)" ;
 
  attribute BOUNDARY_LENGTH of zl30100 : entity is 58;
 
  attribute BOUNDARY_REGISTER of zl30100 : entity is

--       num      cell  port                    function       safe ccel  disval  rslt

	" 0     ( BC_2, REF_FAIL1,              output3,       X,   1,     1,      Z)    ," &
	" 1     ( BC_2, *,                      control,       1)                        ," &
	" 2     ( BC_2, *,                      internal,      X)                        ," &
	" 3     ( BC_2, *,                      internal,      1)                        ," &
	" 4     ( BC_2, REF_FAIL0,              output3,       X,   5,     1,      Z)    ," &
	" 5     ( BC_2, *,                      control,       1)                        ," &
	" 6     ( BC_2, HOLDOVER,               output3,       X,   7,     1,      Z)    ," &
	" 7     ( BC_2, *,                      control,       1)                        ," &
	" 8     ( BC_2, LOCK,                   output3,       X,   9,     1,      Z)    ," &
	" 9     ( BC_2, *,                      control,       1)                        ," &
	" 10    ( BC_4, BW_SEL,                 input,         X)                        ," &
	" 11    ( BC_4, TIECLR_B,               input,         X)                        ," &
	" 12    ( BC_4, *,                      internal,      X)                        ," &
	" 13    ( BC_4, OOR_SEL,                input,         X)                        ," &
	" 14    ( BC_4, *,                      internal,      X)                        ," &
	" 15    ( BC_4, *,                      internal,      X)                        ," &
	" 16    ( BC_4, REF1,                   input,         X)                        ," &
	" 17    ( BC_4, *,                      internal,      X)                        ," &
	" 18    ( BC_4, *,                      internal,      X)                        ," &
	" 19    ( BC_4, *,                      internal,      X)                        ," &
	" 20    ( BC_4, REF0,                   input,         X)                        ," &
	" 21    ( BC_7, REF_SEL,                bidir,         X,   22,    1,      Z)    ," &
	" 22    ( BC_2, *,                      control,       1)                        ," &
	" 23    ( BC_1, *,                      internal,      X)                        ," &
	" 24    ( BC_2, *,                      internal,      1)                        ," &
	" 25    ( BC_4, *,                      internal,      X)                        ," &
	" 26    ( BC_2, F16O_B,                 output3,       X,   27,    1,      Z)    ," &
	" 27    ( BC_2, *,                      control,       1)                        ," &
	" 28    ( BC_2, F4_65O_B,               output3,       X,   29,    1,      Z)    ," &
	" 29    ( BC_2, *,                      control,       1)                        ," &
	" 30    ( BC_7, F8_32O,                 bidir,         X,   31,    1,      Z)    ," &
	" 31    ( BC_2, *,                      control,       1)                        ," &
	" 32    ( BC_7, C16O_B,                 bidir,         X,   33,    1,      Z)    ," &
	" 33    ( BC_2, *,                      control,       1)                        ," &
	" 34    ( BC_7, C2O,                    bidir,         X,   35,    1,      Z)    ," &
	" 35    ( BC_2, *,                      control,       1)                        ," &
	" 36    ( BC_2, C8_32O,                 output3,       X,   37,    1,      Z)    ," &
	" 37    ( BC_2, *,                      control,       1)                        ," &
	" 38    ( BC_2, C4_65O_B,               output3,       X,   39,    1,      Z)    ," &
	" 39    ( BC_2, *,                      control,       1)                        ," &
	" 40    ( BC_1, *,                      internal,      X)                        ," &
	" 41    ( BC_2, *,                      internal,      1)                        ," &
	" 42    ( BC_1, *,                      internal,      X)                        ," &
	" 43    ( BC_2, *,                      internal,      1)                        ," &
	" 44    ( BC_7, C1P5O,                  bidir,         X,   45,    1,      Z)    ," &
	" 45    ( BC_2, *,                      control,       1)                        ," &
	" 46    ( BC_2, *,                      internal,      X)                        ," &
	" 47    ( BC_2, *,                      internal,      1)                        ," &
	" 48    ( BC_2, *,                      internal,      X)                        ," &
	" 49    ( BC_2, *,                      internal,      1)                        ," &
	" 50    ( BC_4, *,                      internal,      X)                        ," &
	" 51    ( BC_4, *,                      internal,      X)                        ," &
	" 52    ( BC_4, OUT_SEL,                input,         X)                        ," &
	" 53    ( BC_4, *,                      internal,      X)                        ," &
	" 54    ( BC_4, RST_B,                  input,         X)                        ," &
	" 55    ( BC_4, MODE_SEL1,              input,         X)                        ," &
	" 56    ( BC_4, MODE_SEL0,              input,         X)                        ," &
	" 57    ( BC_4, HMS,                    input,         X)                        ";

end zl30100;

------------- end of BSDL description for the zl30100 ----------