BSDL Files Library for JTAG
The only free public library that contains thousands of BSDL (Boundary Scan Description Language) models to use with BS/JTAG tools

ChipVORX ISP IP for Ultra Fast Flash Programming
BSDL File: SN74ABT18502 Download View details  


-------------------------------------------------------------------------------
--  TI SN74ABT18502                                                          --
--     IEEE Std 1149.1 (JTAG) Boundary-Scan Test Device                      --
--     with 18-Bit Universal Bus Transceivers (UBTtm)                        --
--     features: NO bus-hold                                                 --
-------------------------------------------------------------------------------
--  Created by    : Texas Instruments Incorporated                           --
--  Documentation : SN74ABT18502 Data Sheet                                  --
--  Product Status: Not preferred for new designs - Use SN74ABTH18502A.      --
--  BSDL revision : 1.2                                                      --
--  BSDL status   : Production                                               --
--  Date created  : 05/01/94                                                 --
--  Last modified : 07/26/97                                                 --
--  Modification history -                                                   --
--      - misc clean-up, cosmetic only                                       --
-------------------------------------------------------------------------------
--                                                                           --
--                             IMPORTANT NOTICE                              --
--                                                                           --
--  Texas Instruments (TI) reserves the right to make changes to its         --
--  products or to discontinue any semiconductor product or service without  --
--  notice, and advises its customers to obtain the latest version of        --
--  relevant information to verify, before placing orders, that the          --
--  information being relied on is current.                                  --
--                                                                           --
--  TI warrants performance of its semiconductor products and related        --
--  software to the specifications applicable at the time of sale in         --
--  accordance with TI's standard warranty. Testing and other quality        --
--  control techniques are utilized to the extent TI deems necessary to      --
--  support this warranty. Specific testing of all parameters of each        --
--  device is not necessarily performed, except those mandated by            --
--  government requirements.                                                 --
--                                                                           --
--  Certain applications using semiconductor products may involve potential  --
--  risks of death, personal injury, or severe property or environmental     --
--  damage ("Critical Applications").                                        --
--                                                                           --
--  TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR     --
--  WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES   --
--  OR SYSTEMS OR OTHER CRITICAL APPLICATIONS.                               --
--                                                                           --
--  Inclusion of TI products in such applications is understood to be fully  --
--  at the risk of the customer. Use of TI products in such applications     --
--  requires the written approval of an appropriate TI officer. Questions    --
--  concerning potential risk applications should be directed to TI through  --
--  a local SC sales office.                                                 --
--                                                                           --
--  In order to minimize risks associated with the customer's applications,  --
--  adequate design and operating safeguards should be provided by the       --
--  customer to minimize inherent or procedural hazards.                     --
--                                                                           --
--  TI assumes no liability for applications assistance, customer product    --
--  design, software performance, or infringement of patents or services     --
--  described herein. Nor does TI warrant or represent that any license,     --
--  either express or implied, is granted under any patent right, copyright, --
--  mask work right, or other intellectual property right of TI covering or  --
--  relating to any combination, machine, or process in which such           --
--  semiconductor products or services might be or are used.                 --
--                                                                           --
--            Copyright (c) 1997, Texas Instruments Incorporated             --
--                                                                           --
-------------------------------------------------------------------------------

entity sn74abt18502 is

    generic (PHYSICAL_PIN_MAP : string := "UNDEFINED");

    port (OEAB_NEG1:in bit;
          OEAB_NEG2:in bit;
          OEBA_NEG1:in bit;
          OEBA_NEG2:in bit;
          LEAB1:in bit;
          LEAB2:in bit;
          LEBA1:in bit;
          LEBA2:in bit;
          CLKAB1:in bit;
          CLKAB2:in bit;
          CLKBA1:in bit;
          CLKBA2:in bit;
          A1:inout bit_vector(1 to 9);
          A2:inout bit_vector(1 to 9);
          B1:inout bit_vector(1 to 9);
          B2:inout bit_vector(1 to 9);
          GND:linkage bit_vector(1 to 8);
          VCC:linkage bit_vector(1 to 4);
          NC:linkage bit_vector(1 to 4);
          TDO:out bit;
          TDI, TMS, TCK:in bit);

    use STD_1149_1_1990.all; -- Get standard attributes and definitions

    attribute PIN_MAP of sn74abt18502 : entity is PHYSICAL_PIN_MAP;

    constant PM :  PIN_MAP_STRING := "OEAB_NEG1:62, OEAB_NEG2:21,"&
                   "OEBA_NEG1:53, OEBA_NEG2:30,"&
                   "LEAB1:60, LEAB2:22, LEBA1:54, LEBA2:28,"&
                   "CLKAB1:59, CLKAB2:23, CLKBA1:55, CLKBA2:27,"&
                   "A1:(63,64,1,2,3,5,6,7,8),"&
                   "A2:(10,11,12,14,15,16,17,18,19),"&
                   "B1:(51,50,49,48,47,46,44,43,42),"&
                   "B2:(40,39,38,37,35,34,33,32,31),"&
                   "GND:(4,13,20,29,36,45,52,61),"&
                   "VCC:(9,25,41,57),"&
                   "TCK:26, TDI:24, TMS:56, TDO:58 ";

    constant HV :  PIN_MAP_STRING := "OEAB_NEG1:7, OEAB_NEG2:31,"&
                   "OEBA_NEG1:65, OEBA_NEG2:41,"&
                   "LEAB1:5, LEAB2:32, LEBA1:66, LEBA2:39,"&
                   "CLKAB1:4, CLKAB2:33, CLKBA1:67, CLKBA2:38,"&
                   "A1:(8,9,10,11,12,14,15,16,17),"&
                   "A2:(20,21,22,24,25,26,27,28,29),"&
                   "B1:(63,62,61,60,59,58,56,55,54),"&
                   "B2:(51,50,49,48,46,45,44,43,42),"&
                   "GND:(6,13,23,30,40,47,57,64),"&
                   "VCC:(2,19,36,53),"&
                   "NC:(1,18,35,52),"&
                   "TCK:37, TDI:34, TMS:68, TDO:3 ";

    attribute TAP_SCAN_IN    of TDI : signal is true;
    attribute TAP_SCAN_MODE  of TMS : signal is true;
    attribute TAP_SCAN_OUT   of TDO : signal is true;
    attribute TAP_SCAN_CLOCK of TCK : signal is (50.0e6, BOTH);

    attribute INSTRUCTION_LENGTH of sn74abt18502 : entity is 8;
    attribute INSTRUCTION_OPCODE of sn74abt18502 : entity is
            "BYPASS (11111111, 10000100), " &
            "EXTEST (00000000), " &
            "SAMPLE (10000010), " &
            "INTEST (00000011), " &
            "IDCODE (10000001), " &
            "HIGHZ  (00000110), " &  -- Control Boundary to High-Impedance
            "CLAMP  (10000111), " &  -- Control Boundary to 1/0
            "RUNT   (00001001), " &  -- Boundary Run Test
            "READBN (00001010), " &  -- Boundary Read Normal Mode
            "READBT (10001011), " &  -- Boundary Read Test Mode
            "CELLTST(00001100), " &  -- Boundary Self-Test Normal Mode
            "TOPHIP (10001101), " &  -- Boundary Toggle Outputs Test Mode
            "SCANCN (10001110), " &  -- BCR Scan Normal Mode
            "SCANCT (00001111)  " ;  -- BCR Scan Test Mode

    attribute INSTRUCTION_CAPTURE of sn74abt18502 : entity is "10000001";
    attribute INSTRUCTION_DISABLE of sn74abt18502 : entity is "HIGHZ";
    attribute INSTRUCTION_GUARD   of sn74abt18502 : entity is "CLAMP";

    attribute IDCODE_REGISTER of sn74abt18502 : entity is
            "0000"                &   --  4 bit version
            "0000000000000110"    &   -- 16 bit part number
            "00000010111"         &   -- 11 bit manufacturer
            "1" ;                     -- mandatory LSB

    attribute REGISTER_ACCESS of sn74abt18502 : entity is
            "BOUNDARY (EXTEST, SAMPLE, INTEST, READBN, READBT, CELLTST),"  &
            "BYPASS   (BYPASS, HIGHZ, CLAMP, RUNT, TOPHIP)," &
            "IDCODE   (IDCODE), " &
            "BCR[21]   (SCANCN, SCANCT)" ;

    attribute BOUNDARY_CELLS    of sn74abt18502 : entity is "BC_1";
    attribute BOUNDARY_LENGTH   of sn74abt18502 : entity is 84;
    attribute BOUNDARY_REGISTER of sn74abt18502 : entity is

    "0  (BC_1, B1(1)    ,output3 , X, 82, 1, Z),"  &
    "1  (BC_1, B1(2)    ,output3 , X, 82, 1, Z),"  &
    "2  (BC_1, B1(3)    ,output3 , X, 82, 1, Z),"  &
    "3  (BC_1, B1(4)    ,output3 , X, 82, 1, Z),"  &
    "4  (BC_1, B1(5)    ,output3 , X, 82, 1, Z),"  &
    "5  (BC_1, B1(6)    ,output3 , X, 82, 1, Z),"  &
    "6  (BC_1, B1(7)    ,output3 , X, 82, 1, Z),"  &
    "7  (BC_1, B1(8)    ,output3 , X, 82, 1, Z),"  &
    "8  (BC_1, B1(9)    ,output3 , X, 82, 1, Z),"  &
    "9  (BC_1, B2(1)    ,output3 , X, 83, 1, Z),"  &
    "10 (BC_1, B2(2)    ,output3 , X, 83, 1, Z),"  &
    "11 (BC_1, B2(3)    ,output3 , X, 83, 1, Z),"  &
    "12 (BC_1, B2(4)    ,output3 , X, 83, 1, Z),"  &
    "13 (BC_1, B2(5)    ,output3 , X, 83, 1, Z),"  &
    "14 (BC_1, B2(6)    ,output3 , X, 83, 1, Z),"  &
    "15 (BC_1, B2(7)    ,output3 , X, 83, 1, Z),"  &
    "16 (BC_1, B2(8)    ,output3 , X, 83, 1, Z),"  &
    "17 (BC_1, B2(9)    ,output3 , X, 83, 1, Z),"  &
    "18 (BC_1, B1(1)    ,input   , X),"  &
    "19 (BC_1, B1(2)    ,input   , X),"  &
    "20 (BC_1, B1(3)    ,input   , X),"  &
    "21 (BC_1, B1(4)    ,input   , X),"  &
    "22 (BC_1, B1(5)    ,input   , X),"  &
    "23 (BC_1, B1(6)    ,input   , X),"  &
    "24 (BC_1, B1(7)    ,input   , X),"  &
    "25 (BC_1, B1(8)    ,input   , X),"  &
    "26 (BC_1, B1(9)    ,input   , X),"  &
    "27 (BC_1, B2(1)    ,input   , X),"  &
    "28 (BC_1, B2(2)    ,input   , X),"  &
    "29 (BC_1, B2(3)    ,input   , X),"  &
    "30 (BC_1, B2(4)    ,input   , X),"  &
    "31 (BC_1, B2(5)    ,input   , X),"  &
    "32 (BC_1, B2(6)    ,input   , X),"  &
    "33 (BC_1, B2(7)    ,input   , X),"  &
    "34 (BC_1, B2(8)    ,input   , X),"  &
    "35 (BC_1, B2(9)    ,input   , X),"  &
    "36 (BC_1, A1(1)    ,output3 , X, 80, 1, Z),"  &
    "37 (BC_1, A1(2)    ,output3 , X, 80, 1, Z),"  &
    "38 (BC_1, A1(3)    ,output3 , X, 80, 1, Z),"  &
    "39 (BC_1, A1(4)    ,output3 , X, 80, 1, Z),"  &
    "40 (BC_1, A1(5)    ,output3 , X, 80, 1, Z),"  &
    "41 (BC_1, A1(6)    ,output3 , X, 80, 1, Z),"  &
    "42 (BC_1, A1(7)    ,output3 , X, 80, 1, Z),"  &
    "43 (BC_1, A1(8)    ,output3 , X, 80, 1, Z),"  &
    "44 (BC_1, A1(9)    ,output3 , X, 80, 1, Z),"  &
    "45 (BC_1, A2(1)    ,output3 , X, 81, 1, Z),"  &
    "46 (BC_1, A2(2)    ,output3 , X, 81, 1, Z),"  &
    "47 (BC_1, A2(3)    ,output3 , X, 81, 1, Z),"  &
    "48 (BC_1, A2(4)    ,output3 , X, 81, 1, Z),"  &
    "49 (BC_1, A2(5)    ,output3 , X, 81, 1, Z),"  &
    "50 (BC_1, A2(6)    ,output3 , X, 81, 1, Z),"  &
    "51 (BC_1, A2(7)    ,output3 , X, 81, 1, Z),"  &
    "52 (BC_1, A2(8)    ,output3 , X, 81, 1, Z),"  &
    "53 (BC_1, A2(9)    ,output3 , X, 81, 1, Z),"  &
    "54 (BC_1, A1(1)    ,input   , X),"  &
    "55 (BC_1, A1(2)    ,input   , X),"  &
    "56 (BC_1, A1(3)    ,input   , X),"  &
    "57 (BC_1, A1(4)    ,input   , X),"  &
    "58 (BC_1, A1(5)    ,input   , X),"  &
    "59 (BC_1, A1(6)    ,input   , X),"  &
    "60 (BC_1, A1(7)    ,input   , X),"  &
    "61 (BC_1, A1(8)    ,input   , X),"  &
    "62 (BC_1, A1(9)    ,input   , X),"  &
    "63 (BC_1, A2(1)    ,input   , X),"  &
    "64 (BC_1, A2(2)    ,input   , X),"  &
    "65 (BC_1, A2(3)    ,input   , X),"  &
    "66 (BC_1, A2(4)    ,input   , X),"  &
    "67 (BC_1, A2(5)    ,input   , X),"  &
    "68 (BC_1, A2(6)    ,input   , X),"  &
    "69 (BC_1, A2(7)    ,input   , X),"  &
    "70 (BC_1, A2(8)    ,input   , X),"  &
    "71 (BC_1, A2(9)    ,input   , X),"  &
    "72 (BC_1, LEBA1    ,input   , X),"  &
    "73 (BC_1, LEBA2    ,input   , X),"  &
    "74 (BC_1, LEAB1    ,input   , X),"  &
    "75 (BC_1, LEAB2    ,input   , X),"  &
    "76 (BC_1, CLKBA1   ,input   , X),"  &
    "77 (BC_1, CLKBA2   ,input   , X),"  &
    "78 (BC_1, CLKAB1   ,input   , X),"  &
    "79 (BC_1, CLKAB2   ,input   , X),"  &
    "80 (BC_1, OEBA_NEG1,input   , 1),"  &
    "80 (BC_1, *        ,controlr, 1),"  &
    "81 (BC_1, OEBA_NEG2,input   , 1),"  &
    "81 (BC_1, *        ,controlr, 1),"  &
    "82 (BC_1, OEAB_NEG1,input   , 1),"  &
    "82 (BC_1, *        ,controlr, 1),"  &
    "83 (BC_1, OEAB_NEG2,input   , 1),"  &
    "83 (BC_1, *        ,controlr, 1) "  ;

end sn74abt18502;

This library contains 7713 BSDL files (for 6085 distinct entities) from 64 vendors
Last BSDL model (ATHENA_TOP) was added on Aug 14, 2017 14:34
info@bsdl.info