--$ XILINX$RCSfile: xa3s200_tq144.bsd,v $
--$ XILINX$Revision: 1.1 $
--
-- BSDL file for device XA3S200, package TQ144
-- Xilinx, Inc. $State: PRELIMINARY $ $Date: 2005/09/08 23:42:50 $
-- Generated by createBSDL 2.21
--
-- For technical support, http://support.xilinx.com -> enter text 'bsdl'
-- in the text search box at the left of the page. If none of
-- these records resolve your problem you should open a web support case
-- or contact our technical support at:
--
-- North America 1-800-255-7778 hotline@xilinx.com
-- United Kingdom +44 870 7350 610 eurosupport@xilinx.com
-- France (33) 1 3463 0100 eurosupport@xilinx.com
-- Germany (49) 89 991 54930 eurosupport@xilinx.com
-- Japan (81) 3-3297-9163 jhotline@xilinx.com
--
-- This BSDL file reflects the pre-configuration JTAG behavior. To reflect
-- the post-configuration JTAG behavior (if any), edit this file as described
-- below. Many of these changes are demonstrated by commented-out template
-- lines preceeding the lines they would replace:
--
-- 1. Enable USER instructions as appropriate (see below).
-- 2. Set disable result of all pads as configured.
-- 3. Set safe state of boundary cells as necessary.
-- 4. Rename entity if necessary to avoid name collisions.
-- 5. Modify USERCODE value in USERCODE_REGISTER declaration.
--
-- To prevent losing the current configuration, the boundary scan
-- test vectors should keep the PROG_B pin high.
--
-- PROG_B can only be captured, not updated. The value
-- at the pin is always used by the device.
--
-- All IOBs prior to configuration, and unused and output-only IOBs following
-- configuration, will sense their pad values during boundary-scan with an LVCMOS25
-- input buffer. In order to properly capture a logic high value at one
-- of these IOBs into its input boundary scan cell, VCCO must be
-- at least 1.7V (Vih for LVCMOS25).
--
-- For post-configuration boundary scan only: If an IOB is configured to use
-- an input standard that uses VREF pins, then the boundary scan test vectors
-- must keep the used VREF pins 3-stated.
--
-- The disable result of a 3-stated I/O in this file correspond
-- to HSWAP_EN being high. If HSWAP_EN is low, every PULL0 should
-- be changed to PULL1.
--
-- HSWAP_EN, M0, M1, and M2 can only be captured, not updated. The value
-- at the pin is always used by the device.
entity XA3S200_TQ144 is
generic (PHYSICAL_PIN_MAP : string := "TQ144" );
port (
GND: linkage bit_vector (1 to 16);
CCLK_P72: inout bit;
DONE_P71: inout bit;
HSWAP_EN_P142: in bit;
M0_P38: in bit;
M1_P37: in bit;
M2_P39: in bit;
PROG_B: in bit;
TCK: in bit;
TDI: in bit;
TDO: out bit;
TMS: in bit;
VCCAUX: linkage bit_vector (1 to 4);
VCCINT: linkage bit_vector (1 to 4);
VCCO01: linkage bit_vector (1 to 3);
VCCO23: linkage bit_vector (1 to 3);
VCCO45: linkage bit_vector (1 to 3);
VCCO67: linkage bit_vector (1 to 3);
IO_P1: inout bit; -- PAD196
IO_P2: inout bit; -- PAD195
IO_P4: inout bit; -- PAD189
IO_P5: inout bit; -- PAD188
IO_P6: inout bit; -- PAD187
IO_P7: inout bit; -- PAD186
IO_P8: inout bit; -- PAD185
IO_P10: inout bit; -- PAD184
IO_P11: inout bit; -- PAD183
IO_P12: inout bit; -- PAD182
IO_P13: inout bit; -- PAD181
IO_P14: inout bit; -- PAD180
IO_P15: inout bit; -- PAD179
IO_P17: inout bit; -- PAD174
IO_P18: inout bit; -- PAD173
IO_P20: inout bit; -- PAD172
IO_P21: inout bit; -- PAD171
IO_P23: inout bit; -- PAD166
IO_P24: inout bit; -- PAD165
IO_P25: inout bit; -- PAD164
IO_P26: inout bit; -- PAD163
IO_P27: inout bit; -- PAD162
IO_P28: inout bit; -- PAD161
IO_P30: inout bit; -- PAD160
IO_P31: inout bit; -- PAD159
IO_P32: inout bit; -- PAD158
IO_P33: inout bit; -- PAD157
IO_P35: inout bit; -- PAD150
IO_P36: inout bit; -- PAD149
IO_P40: inout bit; -- PAD148
IO_P41: inout bit; -- PAD147
IO_P44: inout bit; -- PAD137
IO_P46: inout bit; -- PAD136
IO_P47: inout bit; -- PAD135
IO_P50: inout bit; -- PAD128
IO_P51: inout bit; -- PAD127
IO_P52: inout bit; -- PAD126
IO_P53: inout bit; -- PAD125
IO_P55: inout bit; -- PAD123
IO_P56: inout bit; -- PAD122
IO_P57: inout bit; -- PAD121
IO_P58: inout bit; -- PAD120
IO_P59: inout bit; -- PAD118
IO_P60: inout bit; -- PAD117
IO_P63: inout bit; -- PAD111
IO_P65: inout bit; -- PAD110
IO_P68: inout bit; -- PAD101
IO_P69: inout bit; -- PAD100
IO_P70: inout bit; -- PAD99
IO_P73: inout bit; -- PAD98
IO_P74: inout bit; -- PAD97
IO_P76: inout bit; -- PAD91
IO_P77: inout bit; -- PAD90
IO_P78: inout bit; -- PAD89
IO_P79: inout bit; -- PAD88
IO_P80: inout bit; -- PAD87
IO_P82: inout bit; -- PAD86
IO_P83: inout bit; -- PAD85
IO_P84: inout bit; -- PAD84
IO_P85: inout bit; -- PAD83
IO_P86: inout bit; -- PAD82
IO_P87: inout bit; -- PAD81
IO_P89: inout bit; -- PAD76
IO_P90: inout bit; -- PAD75
IO_P92: inout bit; -- PAD74
IO_P93: inout bit; -- PAD73
IO_P95: inout bit; -- PAD68
IO_P96: inout bit; -- PAD67
IO_P97: inout bit; -- PAD66
IO_P98: inout bit; -- PAD65
IO_P99: inout bit; -- PAD64
IO_P100: inout bit; -- PAD63
IO_P102: inout bit; -- PAD62
IO_P103: inout bit; -- PAD61
IO_P104: inout bit; -- PAD60
IO_P105: inout bit; -- PAD59
IO_P107: inout bit; -- PAD52
IO_P108: inout bit; -- PAD51
IO_P112: inout bit; -- PAD50
IO_P113: inout bit; -- PAD49
IO_P116: inout bit; -- PAD39
IO_P118: inout bit; -- PAD38
IO_P119: inout bit; -- PAD37
IO_P122: inout bit; -- PAD30
IO_P123: inout bit; -- PAD29
IO_P124: inout bit; -- PAD28
IO_P125: inout bit; -- PAD27
IO_P127: inout bit; -- PAD25
IO_P128: inout bit; -- PAD24
IO_P129: inout bit; -- PAD23
IO_P130: inout bit; -- PAD22
IO_P131: inout bit; -- PAD20
IO_P132: inout bit; -- PAD19
IO_P135: inout bit; -- PAD13
IO_P137: inout bit; -- PAD12
IO_P140: inout bit; -- PAD3
IO_P141: inout bit -- PAD2
); --end port list
use STD_1149_1_1994.all;
attribute COMPONENT_CONFORMANCE of XA3S200_TQ144 : entity is
"STD_1149_1_1993";
attribute PIN_MAP of XA3S200_TQ144 : entity is PHYSICAL_PIN_MAP;
constant TQ144: PIN_MAP_STRING:=
"GND:(P9,P16,P22,P29,P42,P45,P64,P67,P81,P88," &
"P94,P101,P114,P117,P136,P139)," &
"CCLK_P72:P72," &
"DONE_P71:P71," &
"HSWAP_EN_P142:P142," &
"M0_P38:P38," &
"M1_P37:P37," &
"M2_P39:P39," &
"PROG_B:P143," &
"TCK:P110," &
"TDI:P144," &
"TDO:P109," &
"TMS:P111," &
"VCCAUX:(P48,P62,P120,P134)," &
"VCCINT:(P49,P61,P121,P133)," &
"VCCO01:(P115,P126,P138)," &
"VCCO23:(P75,P91,P106)," &
"VCCO45:(P43,P54,P66)," &
"VCCO67:(P3,P19,P34)," &
"IO_P1:P1," &
"IO_P2:P2," &
"IO_P4:P4," &
"IO_P5:P5," &
"IO_P6:P6," &
"IO_P7:P7," &
"IO_P8:P8," &
"IO_P10:P10," &
"IO_P11:P11," &
"IO_P12:P12," &
"IO_P13:P13," &
"IO_P14:P14," &
"IO_P15:P15," &
"IO_P17:P17," &
"IO_P18:P18," &
"IO_P20:P20," &
"IO_P21:P21," &
"IO_P23:P23," &
"IO_P24:P24," &
"IO_P25:P25," &
"IO_P26:P26," &
"IO_P27:P27," &
"IO_P28:P28," &
"IO_P30:P30," &
"IO_P31:P31," &
"IO_P32:P32," &
"IO_P33:P33," &
"IO_P35:P35," &
"IO_P36:P36," &
"IO_P40:P40," &
"IO_P41:P41," &
"IO_P44:P44," &
"IO_P46:P46," &
"IO_P47:P47," &
"IO_P50:P50," &
"IO_P51:P51," &
"IO_P52:P52," &
"IO_P53:P53," &
"IO_P55:P55," &
"IO_P56:P56," &
"IO_P57:P57," &
"IO_P58:P58," &
"IO_P59:P59," &
"IO_P60:P60," &
"IO_P63:P63," &
"IO_P65:P65," &
"IO_P68:P68," &
"IO_P69:P69," &
"IO_P70:P70," &
"IO_P73:P73," &
"IO_P74:P74," &
"IO_P76:P76," &
"IO_P77:P77," &
"IO_P78:P78," &
"IO_P79:P79," &
"IO_P80:P80," &
"IO_P82:P82," &
"IO_P83:P83," &
"IO_P84:P84," &
"IO_P85:P85," &
"IO_P86:P86," &
"IO_P87:P87," &
"IO_P89:P89," &
"IO_P90:P90," &
"IO_P92:P92," &
"IO_P93:P93," &
"IO_P95:P95," &
"IO_P96:P96," &
"IO_P97:P97," &
"IO_P98:P98," &
"IO_P99:P99," &
"IO_P100:P100," &
"IO_P102:P102," &
"IO_P103:P103," &
"IO_P104:P104," &
"IO_P105:P105," &
"IO_P107:P107," &
"IO_P108:P108," &
"IO_P112:P112," &
"IO_P113:P113," &
"IO_P116:P116," &
"IO_P118:P118," &
"IO_P119:P119," &
"IO_P122:P122," &
"IO_P123:P123," &
"IO_P124:P124," &
"IO_P125:P125," &
"IO_P127:P127," &
"IO_P128:P128," &
"IO_P129:P129," &
"IO_P130:P130," &
"IO_P131:P131," &
"IO_P132:P132," &
"IO_P135:P135," &
"IO_P137:P137," &
"IO_P140:P140," &
"IO_P141:P141";
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (33.0e6, BOTH);
attribute COMPLIANCE_PATTERNS of XA3S200_TQ144 : entity is
"(PROG_B) (1)";
attribute INSTRUCTION_LENGTH of XA3S200_TQ144 : entity is 6;
attribute INSTRUCTION_OPCODE of XA3S200_TQ144 : entity is
"EXTEST (000000)," &
"SAMPLE (000001)," &
"USER1 (000010)," & -- Not available until after configuration
"USER2 (000011)," & -- Not available until after configuration
"CFG_OUT (000100)," & -- Not available during configuration with another mode.
"CFG_IN (000101)," & -- Not available during configuration with another mode.
"INTEST (000111)," &
"USERCODE (001000)," &
"IDCODE (001001)," &
"HIGHZ (001010)," &
"JPROGRAM (001011)," & -- Not available during configuration with another mode.
"JSTART (001100)," & -- Not available during configuration with another mode.
"JSHUTDOWN (001101)," & -- Not available during configuration with another mode.
"BYPASS (111111)," &
"ISC_ENABLE (010000)," &
"ISC_PROGRAM (010001)," &
"ISC_NOOP (010100)," &
"ISC_READ (010101)," &
"ISC_DISABLE (010110)";
attribute INSTRUCTION_CAPTURE of XA3S200_TQ144 : entity is
-- Bit 5 is 1 when DONE is released (part of startup sequence)
-- Bit 4 is 1 if house-cleaning is complete
-- Bit 3 is ISC_Enabled
-- Bit 2 is ISC_Done
"XXXX01";
attribute INSTRUCTION_PRIVATE of XA3S200_TQ144 : entity is
-- If the device is configured, and a USER instruction is implemented
-- and not private to the FPGA designer, then it should be removed
-- from INSTRUCTION_PRIVATE, and the target register should be defined
-- in REGISTER_ACCESS.
"USER1," &
"USER2," &
"CFG_OUT," &
"CFG_IN," &
"JPROGRAM," &
"JSTART," &
"JSHUTDOWN," &
"ISC_ENABLE," &
"ISC_PROGRAM," &
"ISC_NOOP," &
"ISC_READ," &
"ISC_DISABLE";
attribute IDCODE_REGISTER of XA3S200_TQ144 : entity is
"XXXX" & -- version
"0001010" & -- family
"000010100" & -- array size
"00001001001" & -- manufacturer
"1"; -- required by 1149.1
attribute USERCODE_REGISTER of XA3S200_TQ144 : entity is
"XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX";
attribute REGISTER_ACCESS of XA3S200_TQ144 : entity is
-- "<reg_name>[<length>] (USER1)," &
-- "<reg_name>[<length>] (USER2)," &
"BYPASS (HIGHZ,BYPASS)," &
"DEVICE_ID (USERCODE,IDCODE)," &
"BOUNDARY (SAMPLE,INTEST,EXTEST)";
attribute BOUNDARY_LENGTH of XA3S200_TQ144 : entity is 599;
attribute BOUNDARY_REGISTER of XA3S200_TQ144 : entity is
-- cellnum (type, port, function, safe[, ccell, disval, disrslt])
" 0 (BC_2, *, controlr, 1)," &
" 1 (BC_2, IO_P112, output3, X, 0, 1, PULL0)," & -- PAD50
" 2 (BC_2, IO_P112, input, X)," & -- PAD50
" 3 (BC_2, *, controlr, 1)," &
" 4 (BC_2, IO_P113, output3, X, 3, 1, PULL0)," & -- PAD49
" 5 (BC_2, IO_P113, input, X)," & -- PAD49
" 6 (BC_2, *, internal, 1)," & -- PAD48.T
" 7 (BC_2, *, internal, X)," & -- PAD48.O
" 8 (BC_2, *, internal, X)," & -- PAD48.I
" 9 (BC_2, *, internal, 1)," & -- PAD47.T
" 10 (BC_2, *, internal, X)," & -- PAD47.O
" 11 (BC_2, *, internal, X)," & -- PAD47.I
" 12 (BC_2, *, internal, 1)," & -- PAD46.T
" 13 (BC_2, *, internal, X)," & -- PAD46.O
" 14 (BC_2, *, internal, X)," & -- PAD46.I
" 15 (BC_2, *, internal, 1)," & -- PAD45.T
" 16 (BC_2, *, internal, X)," & -- PAD45.O
" 17 (BC_2, *, internal, X)," & -- PAD45.I
" 18 (BC_2, *, internal, 1)," & -- PAD44.T
" 19 (BC_2, *, internal, X)," & -- PAD44.O
" 20 (BC_2, *, internal, X)," & -- PAD44.I
" 21 (BC_2, *, internal, 1)," & -- PAD43.T
" 22 (BC_2, *, internal, X)," & -- PAD43.O
" 23 (BC_2, *, internal, X)," & -- PAD43.I
" 24 (BC_2, *, internal, 1)," & -- PAD42.T
" 25 (BC_2, *, internal, X)," & -- PAD42.O
" 26 (BC_2, *, internal, X)," & -- PAD42.I
" 27 (BC_2, *, internal, 1)," & -- PAD41.T
" 28 (BC_2, *, internal, X)," & -- PAD41.O
" 29 (BC_2, *, internal, X)," & -- PAD41.I
" 30 (BC_2, *, internal, 1)," & -- PAD40.T
" 31 (BC_2, *, internal, X)," & -- PAD40.O
" 32 (BC_2, *, internal, X)," & -- PAD40.I
" 33 (BC_2, *, controlr, 1)," &
" 34 (BC_2, IO_P116, output3, X, 33, 1, PULL0)," & -- PAD39
" 35 (BC_2, IO_P116, input, X)," & -- PAD39
" 36 (BC_2, *, controlr, 1)," &
" 37 (BC_2, IO_P118, output3, X, 36, 1, PULL0)," & -- PAD38
" 38 (BC_2, IO_P118, input, X)," & -- PAD38
" 39 (BC_2, *, controlr, 1)," &
" 40 (BC_2, IO_P119, output3, X, 39, 1, PULL0)," & -- PAD37
" 41 (BC_2, IO_P119, input, X)," & -- PAD37
" 42 (BC_2, *, internal, 1)," & -- PAD36.T
" 43 (BC_2, *, internal, X)," & -- PAD36.O
" 44 (BC_2, *, internal, X)," & -- PAD36.I
" 45 (BC_2, *, internal, 1)," & -- PAD35.T
" 46 (BC_2, *, internal, X)," & -- PAD35.O
" 47 (BC_2, *, internal, X)," & -- PAD35.I
" 48 (BC_2, *, internal, 1)," & -- PAD34.T
" 49 (BC_2, *, internal, X)," & -- PAD34.O
" 50 (BC_2, *, internal, X)," & -- PAD34.I
" 51 (BC_2, *, internal, 1)," & -- PAD33.T
" 52 (BC_2, *, internal, X)," & -- PAD33.O
" 53 (BC_2, *, internal, X)," & -- PAD33.I
" 54 (BC_2, *, internal, 1)," & -- PAD32.T
" 55 (BC_2, *, internal, X)," & -- PAD32.O
" 56 (BC_2, *, internal, X)," & -- PAD32.I
" 57 (BC_2, *, internal, 1)," & -- PAD31.T
" 58 (BC_2, *, internal, X)," & -- PAD31.O
" 59 (BC_2, *, internal, X)," & -- PAD31.I
" 60 (BC_2, *, controlr, 1)," &
" 61 (BC_2, IO_P122, output3, X, 60, 1, PULL0)," & -- PAD30
" 62 (BC_2, IO_P122, input, X)," & -- PAD30
" 63 (BC_2, *, controlr, 1)," &
" 64 (BC_2, IO_P123, output3, X, 63, 1, PULL0)," & -- PAD29
" 65 (BC_2, IO_P123, input, X)," & -- PAD29
" 66 (BC_2, *, controlr, 1)," &
" 67 (BC_2, IO_P124, output3, X, 66, 1, PULL0)," & -- PAD28
" 68 (BC_2, IO_P124, input, X)," & -- PAD28
" 69 (BC_2, *, controlr, 1)," &
" 70 (BC_2, IO_P125, output3, X, 69, 1, PULL0)," & -- PAD27
" 71 (BC_2, IO_P125, input, X)," & -- PAD27
" 72 (BC_2, *, internal, 1)," & -- PAD26.T
" 73 (BC_2, *, internal, X)," & -- PAD26.O
" 74 (BC_2, *, internal, X)," & -- PAD26.I
" 75 (BC_2, *, controlr, 1)," &
" 76 (BC_2, IO_P127, output3, X, 75, 1, PULL0)," & -- PAD25
" 77 (BC_2, IO_P127, input, X)," & -- PAD25
" 78 (BC_2, *, controlr, 1)," &
" 79 (BC_2, IO_P128, output3, X, 78, 1, PULL0)," & -- PAD24
" 80 (BC_2, IO_P128, input, X)," & -- PAD24
" 81 (BC_2, *, controlr, 1)," &
" 82 (BC_2, IO_P129, output3, X, 81, 1, PULL0)," & -- PAD23
" 83 (BC_2, IO_P129, input, X)," & -- PAD23
" 84 (BC_2, *, controlr, 1)," &
" 85 (BC_2, IO_P130, output3, X, 84, 1, PULL0)," & -- PAD22
" 86 (BC_2, IO_P130, input, X)," & -- PAD22
" 87 (BC_2, *, internal, 1)," & -- PAD21.T
" 88 (BC_2, *, internal, X)," & -- PAD21.O
" 89 (BC_2, *, internal, X)," & -- PAD21.I
" 90 (BC_2, *, controlr, 1)," &
" 91 (BC_2, IO_P131, output3, X, 90, 1, PULL0)," & -- PAD20
" 92 (BC_2, IO_P131, input, X)," & -- PAD20
" 93 (BC_2, *, controlr, 1)," &
" 94 (BC_2, IO_P132, output3, X, 93, 1, PULL0)," & -- PAD19
" 95 (BC_2, IO_P132, input, X)," & -- PAD19
" 96 (BC_2, *, internal, 1)," & -- PAD18.T
" 97 (BC_2, *, internal, X)," & -- PAD18.O
" 98 (BC_2, *, internal, X)," & -- PAD18.I
" 99 (BC_2, *, internal, 1)," & -- PAD17.T
" 100 (BC_2, *, internal, X)," & -- PAD17.O
" 101 (BC_2, *, internal, X)," & -- PAD17.I
" 102 (BC_2, *, internal, 1)," & -- PAD16.T
" 103 (BC_2, *, internal, X)," & -- PAD16.O
" 104 (BC_2, *, internal, X)," & -- PAD16.I
" 105 (BC_2, *, internal, 1)," & -- PAD15.T
" 106 (BC_2, *, internal, X)," & -- PAD15.O
" 107 (BC_2, *, internal, X)," & -- PAD15.I
" 108 (BC_2, *, internal, 1)," & -- PAD14.T
" 109 (BC_2, *, internal, X)," & -- PAD14.O
" 110 (BC_2, *, internal, X)," & -- PAD14.I
" 111 (BC_2, *, controlr, 1)," &
" 112 (BC_2, IO_P135, output3, X, 111, 1, PULL0)," & -- PAD13
" 113 (BC_2, IO_P135, input, X)," & -- PAD13
" 114 (BC_2, *, controlr, 1)," &
" 115 (BC_2, IO_P137, output3, X, 114, 1, PULL0)," & -- PAD12
" 116 (BC_2, IO_P137, input, X)," & -- PAD12
" 117 (BC_2, *, internal, 1)," & -- PAD11.T
" 118 (BC_2, *, internal, X)," & -- PAD11.O
" 119 (BC_2, *, internal, X)," & -- PAD11.I
" 120 (BC_2, *, internal, 1)," & -- PAD10.T
" 121 (BC_2, *, internal, X)," & -- PAD10.O
" 122 (BC_2, *, internal, X)," & -- PAD10.I
" 123 (BC_2, *, internal, 1)," & -- PAD9.T
" 124 (BC_2, *, internal, X)," & -- PAD9.O
" 125 (BC_2, *, internal, X)," & -- PAD9.I
" 126 (BC_2, *, internal, 1)," & -- PAD8.T
" 127 (BC_2, *, internal, X)," & -- PAD8.O
" 128 (BC_2, *, internal, X)," & -- PAD8.I
" 129 (BC_2, *, internal, 1)," & -- PAD7.T
" 130 (BC_2, *, internal, X)," & -- PAD7.O
" 131 (BC_2, *, internal, X)," & -- PAD7.I
" 132 (BC_2, *, internal, 1)," & -- PAD6.T
" 133 (BC_2, *, internal, X)," & -- PAD6.O
" 134 (BC_2, *, internal, X)," & -- PAD6.I
" 135 (BC_2, *, internal, 1)," & -- PAD5.T
" 136 (BC_2, *, internal, X)," & -- PAD5.O
" 137 (BC_2, *, internal, X)," & -- PAD5.I
" 138 (BC_2, *, internal, 1)," & -- PAD4.T
" 139 (BC_2, *, internal, X)," & -- PAD4.O
" 140 (BC_2, *, internal, X)," & -- PAD4.I
" 141 (BC_2, *, controlr, 1)," &
" 142 (BC_2, IO_P140, output3, X, 141, 1, PULL0)," & -- PAD3
" 143 (BC_2, IO_P140, input, X)," & -- PAD3
" 144 (BC_2, *, controlr, 1)," &
" 145 (BC_2, IO_P141, output3, X, 144, 1, PULL0)," & -- PAD2
" 146 (BC_2, IO_P141, input, X)," & -- PAD2
" 147 (BC_2, *, internal, 1)," & -- PAD1.T
" 148 (BC_2, *, internal, X)," & -- PAD1.O
" 149 (BC_2, *, internal, X)," & -- PAD1.I
" 150 (BC_2, HSWAP_EN_P142, input, X)," &
" 151 (BC_2, *, internal, 1)," & -- PROG_B.I
" 152 (BC_2, *, controlr, 1)," &
" 153 (BC_2, IO_P1, output3, X, 152, 1, PULL0)," & -- PAD196
" 154 (BC_2, IO_P1, input, X)," & -- PAD196
" 155 (BC_2, *, controlr, 1)," &
" 156 (BC_2, IO_P2, output3, X, 155, 1, PULL0)," & -- PAD195
" 157 (BC_2, IO_P2, input, X)," & -- PAD195
" 158 (BC_2, *, internal, 1)," & -- PAD194.T
" 159 (BC_2, *, internal, X)," & -- PAD194.O
" 160 (BC_2, *, internal, X)," & -- PAD194.I
" 161 (BC_2, *, internal, 1)," & -- PAD193.T
" 162 (BC_2, *, internal, X)," & -- PAD193.O
" 163 (BC_2, *, internal, X)," & -- PAD193.I
" 164 (BC_2, *, internal, 1)," & -- PAD192.T
" 165 (BC_2, *, internal, X)," & -- PAD192.O
" 166 (BC_2, *, internal, X)," & -- PAD192.I
" 167 (BC_2, *, internal, 1)," & -- PAD191.T
" 168 (BC_2, *, internal, X)," & -- PAD191.O
" 169 (BC_2, *, internal, X)," & -- PAD191.I
" 170 (BC_2, *, internal, 1)," & -- PAD190.T
" 171 (BC_2, *, internal, X)," & -- PAD190.O
" 172 (BC_2, *, internal, X)," & -- PAD190.I
" 173 (BC_2, *, controlr, 1)," &
" 174 (BC_2, IO_P4, output3, X, 173, 1, PULL0)," & -- PAD189
" 175 (BC_2, IO_P4, input, X)," & -- PAD189
" 176 (BC_2, *, controlr, 1)," &
" 177 (BC_2, IO_P5, output3, X, 176, 1, PULL0)," & -- PAD188
" 178 (BC_2, IO_P5, input, X)," & -- PAD188
" 179 (BC_2, *, controlr, 1)," &
" 180 (BC_2, IO_P6, output3, X, 179, 1, PULL0)," & -- PAD187
" 181 (BC_2, IO_P6, input, X)," & -- PAD187
" 182 (BC_2, *, controlr, 1)," &
" 183 (BC_2, IO_P7, output3, X, 182, 1, PULL0)," & -- PAD186
" 184 (BC_2, IO_P7, input, X)," & -- PAD186
" 185 (BC_2, *, controlr, 1)," &
" 186 (BC_2, IO_P8, output3, X, 185, 1, PULL0)," & -- PAD185
" 187 (BC_2, IO_P8, input, X)," & -- PAD185
" 188 (BC_2, *, controlr, 1)," &
" 189 (BC_2, IO_P10, output3, X, 188, 1, PULL0)," & -- PAD184
" 190 (BC_2, IO_P10, input, X)," & -- PAD184
" 191 (BC_2, *, controlr, 1)," &
" 192 (BC_2, IO_P11, output3, X, 191, 1, PULL0)," & -- PAD183
" 193 (BC_2, IO_P11, input, X)," & -- PAD183
" 194 (BC_2, *, controlr, 1)," &
" 195 (BC_2, IO_P12, output3, X, 194, 1, PULL0)," & -- PAD182
" 196 (BC_2, IO_P12, input, X)," & -- PAD182
" 197 (BC_2, *, controlr, 1)," &
" 198 (BC_2, IO_P13, output3, X, 197, 1, PULL0)," & -- PAD181
" 199 (BC_2, IO_P13, input, X)," & -- PAD181
" 200 (BC_2, *, controlr, 1)," &
" 201 (BC_2, IO_P14, output3, X, 200, 1, PULL0)," & -- PAD180
" 202 (BC_2, IO_P14, input, X)," & -- PAD180
" 203 (BC_2, *, controlr, 1)," &
" 204 (BC_2, IO_P15, output3, X, 203, 1, PULL0)," & -- PAD179
" 205 (BC_2, IO_P15, input, X)," & -- PAD179
" 206 (BC_2, *, internal, 1)," & -- PAD178.T
" 207 (BC_2, *, internal, X)," & -- PAD178.O
" 208 (BC_2, *, internal, X)," & -- PAD178.I
" 209 (BC_2, *, internal, 1)," & -- PAD177.T
" 210 (BC_2, *, internal, X)," & -- PAD177.O
" 211 (BC_2, *, internal, X)," & -- PAD177.I
" 212 (BC_2, *, internal, 1)," & -- PAD176.T
" 213 (BC_2, *, internal, X)," & -- PAD176.O
" 214 (BC_2, *, internal, X)," & -- PAD176.I
" 215 (BC_2, *, internal, 1)," & -- PAD175.T
" 216 (BC_2, *, internal, X)," & -- PAD175.O
" 217 (BC_2, *, internal, X)," & -- PAD175.I
" 218 (BC_2, *, controlr, 1)," &
" 219 (BC_2, IO_P17, output3, X, 218, 1, PULL0)," & -- PAD174
" 220 (BC_2, IO_P17, input, X)," & -- PAD174
" 221 (BC_2, *, controlr, 1)," &
" 222 (BC_2, IO_P18, output3, X, 221, 1, PULL0)," & -- PAD173
" 223 (BC_2, IO_P18, input, X)," & -- PAD173
" 224 (BC_2, *, controlr, 1)," &
" 225 (BC_2, IO_P20, output3, X, 224, 1, PULL0)," & -- PAD172
" 226 (BC_2, IO_P20, input, X)," & -- PAD172
" 227 (BC_2, *, controlr, 1)," &
" 228 (BC_2, IO_P21, output3, X, 227, 1, PULL0)," & -- PAD171
" 229 (BC_2, IO_P21, input, X)," & -- PAD171
" 230 (BC_2, *, internal, 1)," & -- PAD170.T
" 231 (BC_2, *, internal, X)," & -- PAD170.O
" 232 (BC_2, *, internal, X)," & -- PAD170.I
" 233 (BC_2, *, internal, 1)," & -- PAD169.T
" 234 (BC_2, *, internal, X)," & -- PAD169.O
" 235 (BC_2, *, internal, X)," & -- PAD169.I
" 236 (BC_2, *, internal, 1)," & -- PAD168.T
" 237 (BC_2, *, internal, X)," & -- PAD168.O
" 238 (BC_2, *, internal, X)," & -- PAD168.I
" 239 (BC_2, *, internal, 1)," & -- PAD167.T
" 240 (BC_2, *, internal, X)," & -- PAD167.O
" 241 (BC_2, *, internal, X)," & -- PAD167.I
" 242 (BC_2, *, controlr, 1)," &
" 243 (BC_2, IO_P23, output3, X, 242, 1, PULL0)," & -- PAD166
" 244 (BC_2, IO_P23, input, X)," & -- PAD166
" 245 (BC_2, *, controlr, 1)," &
" 246 (BC_2, IO_P24, output3, X, 245, 1, PULL0)," & -- PAD165
" 247 (BC_2, IO_P24, input, X)," & -- PAD165
" 248 (BC_2, *, controlr, 1)," &
" 249 (BC_2, IO_P25, output3, X, 248, 1, PULL0)," & -- PAD164
" 250 (BC_2, IO_P25, input, X)," & -- PAD164
" 251 (BC_2, *, controlr, 1)," &
" 252 (BC_2, IO_P26, output3, X, 251, 1, PULL0)," & -- PAD163
" 253 (BC_2, IO_P26, input, X)," & -- PAD163
" 254 (BC_2, *, controlr, 1)," &
" 255 (BC_2, IO_P27, output3, X, 254, 1, PULL0)," & -- PAD162
" 256 (BC_2, IO_P27, input, X)," & -- PAD162
" 257 (BC_2, *, controlr, 1)," &
" 258 (BC_2, IO_P28, output3, X, 257, 1, PULL0)," & -- PAD161
" 259 (BC_2, IO_P28, input, X)," & -- PAD161
" 260 (BC_2, *, controlr, 1)," &
" 261 (BC_2, IO_P30, output3, X, 260, 1, PULL0)," & -- PAD160
" 262 (BC_2, IO_P30, input, X)," & -- PAD160
" 263 (BC_2, *, controlr, 1)," &
" 264 (BC_2, IO_P31, output3, X, 263, 1, PULL0)," & -- PAD159
" 265 (BC_2, IO_P31, input, X)," & -- PAD159
" 266 (BC_2, *, controlr, 1)," &
" 267 (BC_2, IO_P32, output3, X, 266, 1, PULL0)," & -- PAD158
" 268 (BC_2, IO_P32, input, X)," & -- PAD158
" 269 (BC_2, *, controlr, 1)," &
" 270 (BC_2, IO_P33, output3, X, 269, 1, PULL0)," & -- PAD157
" 271 (BC_2, IO_P33, input, X)," & -- PAD157
" 272 (BC_2, *, internal, 1)," & -- PAD156.T
" 273 (BC_2, *, internal, X)," & -- PAD156.O
" 274 (BC_2, *, internal, X)," & -- PAD156.I
" 275 (BC_2, *, internal, 1)," & -- PAD155.T
" 276 (BC_2, *, internal, X)," & -- PAD155.O
" 277 (BC_2, *, internal, X)," & -- PAD155.I
" 278 (BC_2, *, internal, 1)," & -- PAD154.T
" 279 (BC_2, *, internal, X)," & -- PAD154.O
" 280 (BC_2, *, internal, X)," & -- PAD154.I
" 281 (BC_2, *, internal, 1)," & -- PAD153.T
" 282 (BC_2, *, internal, X)," & -- PAD153.O
" 283 (BC_2, *, internal, X)," & -- PAD153.I
" 284 (BC_2, *, internal, 1)," & -- PAD152.T
" 285 (BC_2, *, internal, X)," & -- PAD152.O
" 286 (BC_2, *, internal, X)," & -- PAD152.I
" 287 (BC_2, *, internal, 1)," & -- PAD151.T
" 288 (BC_2, *, internal, X)," & -- PAD151.O
" 289 (BC_2, *, internal, X)," & -- PAD151.I
" 290 (BC_2, *, controlr, 1)," &
" 291 (BC_2, IO_P35, output3, X, 290, 1, PULL0)," & -- PAD150
" 292 (BC_2, IO_P35, input, X)," & -- PAD150
" 293 (BC_2, *, controlr, 1)," &
" 294 (BC_2, IO_P36, output3, X, 293, 1, PULL0)," & -- PAD149
" 295 (BC_2, IO_P36, input, X)," & -- PAD149
" 296 (BC_2, M1_P37, input, X)," &
" 297 (BC_2, M0_P38, input, X)," &
" 298 (BC_2, M2_P39, input, X)," &
" 299 (BC_2, *, controlr, 1)," &
" 300 (BC_2, IO_P40, output3, X, 299, 1, PULL0)," & -- PAD148
" 301 (BC_2, IO_P40, input, X)," & -- PAD148
" 302 (BC_2, *, controlr, 1)," &
" 303 (BC_2, IO_P41, output3, X, 302, 1, PULL0)," & -- PAD147
" 304 (BC_2, IO_P41, input, X)," & -- PAD147
" 305 (BC_2, *, internal, 1)," & -- PAD146.T
" 306 (BC_2, *, internal, X)," & -- PAD146.O
" 307 (BC_2, *, internal, X)," & -- PAD146.I
" 308 (BC_2, *, internal, 1)," & -- PAD145.T
" 309 (BC_2, *, internal, X)," & -- PAD145.O
" 310 (BC_2, *, internal, X)," & -- PAD145.I
" 311 (BC_2, *, internal, 1)," & -- PAD144.T
" 312 (BC_2, *, internal, X)," & -- PAD144.O
" 313 (BC_2, *, internal, X)," & -- PAD144.I
" 314 (BC_2, *, internal, 1)," & -- PAD143.T
" 315 (BC_2, *, internal, X)," & -- PAD143.O
" 316 (BC_2, *, internal, X)," & -- PAD143.I
" 317 (BC_2, *, internal, 1)," & -- PAD142.T
" 318 (BC_2, *, internal, X)," & -- PAD142.O
" 319 (BC_2, *, internal, X)," & -- PAD142.I
" 320 (BC_2, *, internal, 1)," & -- PAD141.T
" 321 (BC_2, *, internal, X)," & -- PAD141.O
" 322 (BC_2, *, internal, X)," & -- PAD141.I
" 323 (BC_2, *, internal, 1)," & -- PAD140.T
" 324 (BC_2, *, internal, X)," & -- PAD140.O
" 325 (BC_2, *, internal, X)," & -- PAD140.I
" 326 (BC_2, *, internal, 1)," & -- PAD139.T
" 327 (BC_2, *, internal, X)," & -- PAD139.O
" 328 (BC_2, *, internal, X)," & -- PAD139.I
" 329 (BC_2, *, internal, 1)," & -- PAD138.T
" 330 (BC_2, *, internal, X)," & -- PAD138.O
" 331 (BC_2, *, internal, X)," & -- PAD138.I
" 332 (BC_2, *, controlr, 1)," &
" 333 (BC_2, IO_P44, output3, X, 332, 1, PULL0)," & -- PAD137
" 334 (BC_2, IO_P44, input, X)," & -- PAD137
" 335 (BC_2, *, controlr, 1)," &
" 336 (BC_2, IO_P46, output3, X, 335, 1, PULL0)," & -- PAD136
" 337 (BC_2, IO_P46, input, X)," & -- PAD136
" 338 (BC_2, *, controlr, 1)," &
" 339 (BC_2, IO_P47, output3, X, 338, 1, PULL0)," & -- PAD135
" 340 (BC_2, IO_P47, input, X)," & -- PAD135
" 341 (BC_2, *, internal, 1)," & -- PAD134.T
" 342 (BC_2, *, internal, X)," & -- PAD134.O
" 343 (BC_2, *, internal, X)," & -- PAD134.I
" 344 (BC_2, *, internal, 1)," & -- PAD133.T
" 345 (BC_2, *, internal, X)," & -- PAD133.O
" 346 (BC_2, *, internal, X)," & -- PAD133.I
" 347 (BC_2, *, internal, 1)," & -- PAD132.T
" 348 (BC_2, *, internal, X)," & -- PAD132.O
" 349 (BC_2, *, internal, X)," & -- PAD132.I
" 350 (BC_2, *, internal, 1)," & -- PAD131.T
" 351 (BC_2, *, internal, X)," & -- PAD131.O
" 352 (BC_2, *, internal, X)," & -- PAD131.I
" 353 (BC_2, *, internal, 1)," & -- PAD130.T
" 354 (BC_2, *, internal, X)," & -- PAD130.O
" 355 (BC_2, *, internal, X)," & -- PAD130.I
" 356 (BC_2, *, internal, 1)," & -- PAD129.T
" 357 (BC_2, *, internal, X)," & -- PAD129.O
" 358 (BC_2, *, internal, X)," & -- PAD129.I
" 359 (BC_2, *, controlr, 1)," &
" 360 (BC_2, IO_P50, output3, X, 359, 1, PULL0)," & -- PAD128
" 361 (BC_2, IO_P50, input, X)," & -- PAD128
" 362 (BC_2, *, controlr, 1)," &
" 363 (BC_2, IO_P51, output3, X, 362, 1, PULL0)," & -- PAD127
" 364 (BC_2, IO_P51, input, X)," & -- PAD127
" 365 (BC_2, *, controlr, 1)," &
" 366 (BC_2, IO_P52, output3, X, 365, 1, PULL0)," & -- PAD126
" 367 (BC_2, IO_P52, input, X)," & -- PAD126
" 368 (BC_2, *, controlr, 1)," &
" 369 (BC_2, IO_P53, output3, X, 368, 1, PULL0)," & -- PAD125
" 370 (BC_2, IO_P53, input, X)," & -- PAD125
" 371 (BC_2, *, internal, 1)," & -- PAD124.T
" 372 (BC_2, *, internal, X)," & -- PAD124.O
" 373 (BC_2, *, internal, X)," & -- PAD124.I
" 374 (BC_2, *, controlr, 1)," &
" 375 (BC_2, IO_P55, output3, X, 374, 1, PULL0)," & -- PAD123
" 376 (BC_2, IO_P55, input, X)," & -- PAD123
" 377 (BC_2, *, controlr, 1)," &
" 378 (BC_2, IO_P56, output3, X, 377, 1, PULL0)," & -- PAD122
" 379 (BC_2, IO_P56, input, X)," & -- PAD122
" 380 (BC_2, *, controlr, 1)," &
" 381 (BC_2, IO_P57, output3, X, 380, 1, PULL0)," & -- PAD121
" 382 (BC_2, IO_P57, input, X)," & -- PAD121
" 383 (BC_2, *, controlr, 1)," &
" 384 (BC_2, IO_P58, output3, X, 383, 1, PULL0)," & -- PAD120
" 385 (BC_2, IO_P58, input, X)," & -- PAD120
" 386 (BC_2, *, internal, 1)," & -- PAD119.T
" 387 (BC_2, *, internal, X)," & -- PAD119.O
" 388 (BC_2, *, internal, X)," & -- PAD119.I
" 389 (BC_2, *, controlr, 1)," &
" 390 (BC_2, IO_P59, output3, X, 389, 1, PULL0)," & -- PAD118
" 391 (BC_2, IO_P59, input, X)," & -- PAD118
" 392 (BC_2, *, controlr, 1)," &
" 393 (BC_2, IO_P60, output3, X, 392, 1, PULL0)," & -- PAD117
" 394 (BC_2, IO_P60, input, X)," & -- PAD117
" 395 (BC_2, *, internal, 1)," & -- PAD116.T
" 396 (BC_2, *, internal, X)," & -- PAD116.O
" 397 (BC_2, *, internal, X)," & -- PAD116.I
" 398 (BC_2, *, internal, 1)," & -- PAD115.T
" 399 (BC_2, *, internal, X)," & -- PAD115.O
" 400 (BC_2, *, internal, X)," & -- PAD115.I
" 401 (BC_2, *, internal, 1)," & -- PAD114.T
" 402 (BC_2, *, internal, X)," & -- PAD114.O
" 403 (BC_2, *, internal, X)," & -- PAD114.I
" 404 (BC_2, *, internal, 1)," & -- PAD113.T
" 405 (BC_2, *, internal, X)," & -- PAD113.O
" 406 (BC_2, *, internal, X)," & -- PAD113.I
" 407 (BC_2, *, internal, 1)," & -- PAD112.T
" 408 (BC_2, *, internal, X)," & -- PAD112.O
" 409 (BC_2, *, internal, X)," & -- PAD112.I
" 410 (BC_2, *, controlr, 1)," &
" 411 (BC_2, IO_P63, output3, X, 410, 1, PULL0)," & -- PAD111
" 412 (BC_2, IO_P63, input, X)," & -- PAD111
" 413 (BC_2, *, controlr, 1)," &
" 414 (BC_2, IO_P65, output3, X, 413, 1, PULL0)," & -- PAD110
" 415 (BC_2, IO_P65, input, X)," & -- PAD110
" 416 (BC_2, *, internal, 1)," & -- PAD109.T
" 417 (BC_2, *, internal, X)," & -- PAD109.O
" 418 (BC_2, *, internal, X)," & -- PAD109.I
" 419 (BC_2, *, internal, 1)," & -- PAD108.T
" 420 (BC_2, *, internal, X)," & -- PAD108.O
" 421 (BC_2, *, internal, X)," & -- PAD108.I
" 422 (BC_2, *, internal, 1)," & -- PAD107.T
" 423 (BC_2, *, internal, X)," & -- PAD107.O
" 424 (BC_2, *, internal, X)," & -- PAD107.I
" 425 (BC_2, *, internal, 1)," & -- PAD106.T
" 426 (BC_2, *, internal, X)," & -- PAD106.O
" 427 (BC_2, *, internal, X)," & -- PAD106.I
" 428 (BC_2, *, internal, 1)," & -- PAD105.T
" 429 (BC_2, *, internal, X)," & -- PAD105.O
" 430 (BC_2, *, internal, X)," & -- PAD105.I
" 431 (BC_2, *, internal, 1)," & -- PAD104.T
" 432 (BC_2, *, internal, X)," & -- PAD104.O
" 433 (BC_2, *, internal, X)," & -- PAD104.I
" 434 (BC_2, *, internal, 1)," & -- PAD103.T
" 435 (BC_2, *, internal, X)," & -- PAD103.O
" 436 (BC_2, *, internal, X)," & -- PAD103.I
" 437 (BC_2, *, internal, 1)," & -- PAD102.T
" 438 (BC_2, *, internal, X)," & -- PAD102.O
" 439 (BC_2, *, internal, X)," & -- PAD102.I
" 440 (BC_2, *, controlr, 1)," &
" 441 (BC_2, IO_P68, output3, X, 440, 1, PULL0)," & -- PAD101
" 442 (BC_2, IO_P68, input, X)," & -- PAD101
" 443 (BC_2, *, controlr, 1)," &
" 444 (BC_2, IO_P69, output3, X, 443, 1, PULL0)," & -- PAD100
" 445 (BC_2, IO_P69, input, X)," & -- PAD100
" 446 (BC_2, *, controlr, 1)," &
" 447 (BC_2, IO_P70, output3, X, 446, 1, PULL0)," & -- PAD99
" 448 (BC_2, IO_P70, input, X)," & -- PAD99
" 449 (BC_2, *, controlr, 1)," &
" 450 (BC_2, DONE_P71, output3, X, 449, 1, PULL1)," &
" 451 (BC_2, DONE_P71, input, X)," &
" 452 (BC_2, *, controlr, 1)," &
" 453 (BC_2, CCLK_P72, output3, X, 452, 1, PULL1)," &
" 454 (BC_2, CCLK_P72, input, X)," &
" 455 (BC_2, *, controlr, 1)," &
" 456 (BC_2, IO_P73, output3, X, 455, 1, PULL0)," & -- PAD98
" 457 (BC_2, IO_P73, input, X)," & -- PAD98
" 458 (BC_2, *, controlr, 1)," &
" 459 (BC_2, IO_P74, output3, X, 458, 1, PULL0)," & -- PAD97
" 460 (BC_2, IO_P74, input, X)," & -- PAD97
" 461 (BC_2, *, internal, 1)," & -- PAD96.T
" 462 (BC_2, *, internal, X)," & -- PAD96.O
" 463 (BC_2, *, internal, X)," & -- PAD96.I
" 464 (BC_2, *, internal, 1)," & -- PAD95.T
" 465 (BC_2, *, internal, X)," & -- PAD95.O
" 466 (BC_2, *, internal, X)," & -- PAD95.I
" 467 (BC_2, *, internal, 1)," & -- PAD94.T
" 468 (BC_2, *, internal, X)," & -- PAD94.O
" 469 (BC_2, *, internal, X)," & -- PAD94.I
" 470 (BC_2, *, internal, 1)," & -- PAD93.T
" 471 (BC_2, *, internal, X)," & -- PAD93.O
" 472 (BC_2, *, internal, X)," & -- PAD93.I
" 473 (BC_2, *, internal, 1)," & -- PAD92.T
" 474 (BC_2, *, internal, X)," & -- PAD92.O
" 475 (BC_2, *, internal, X)," & -- PAD92.I
" 476 (BC_2, *, controlr, 1)," &
" 477 (BC_2, IO_P76, output3, X, 476, 1, PULL0)," & -- PAD91
" 478 (BC_2, IO_P76, input, X)," & -- PAD91
" 479 (BC_2, *, controlr, 1)," &
" 480 (BC_2, IO_P77, output3, X, 479, 1, PULL0)," & -- PAD90
" 481 (BC_2, IO_P77, input, X)," & -- PAD90
" 482 (BC_2, *, controlr, 1)," &
" 483 (BC_2, IO_P78, output3, X, 482, 1, PULL0)," & -- PAD89
" 484 (BC_2, IO_P78, input, X)," & -- PAD89
" 485 (BC_2, *, controlr, 1)," &
" 486 (BC_2, IO_P79, output3, X, 485, 1, PULL0)," & -- PAD88
" 487 (BC_2, IO_P79, input, X)," & -- PAD88
" 488 (BC_2, *, controlr, 1)," &
" 489 (BC_2, IO_P80, output3, X, 488, 1, PULL0)," & -- PAD87
" 490 (BC_2, IO_P80, input, X)," & -- PAD87
" 491 (BC_2, *, controlr, 1)," &
" 492 (BC_2, IO_P82, output3, X, 491, 1, PULL0)," & -- PAD86
" 493 (BC_2, IO_P82, input, X)," & -- PAD86
" 494 (BC_2, *, controlr, 1)," &
" 495 (BC_2, IO_P83, output3, X, 494, 1, PULL0)," & -- PAD85
" 496 (BC_2, IO_P83, input, X)," & -- PAD85
" 497 (BC_2, *, controlr, 1)," &
" 498 (BC_2, IO_P84, output3, X, 497, 1, PULL0)," & -- PAD84
" 499 (BC_2, IO_P84, input, X)," & -- PAD84
" 500 (BC_2, *, controlr, 1)," &
" 501 (BC_2, IO_P85, output3, X, 500, 1, PULL0)," & -- PAD83
" 502 (BC_2, IO_P85, input, X)," & -- PAD83
" 503 (BC_2, *, controlr, 1)," &
" 504 (BC_2, IO_P86, output3, X, 503, 1, PULL0)," & -- PAD82
" 505 (BC_2, IO_P86, input, X)," & -- PAD82
" 506 (BC_2, *, controlr, 1)," &
" 507 (BC_2, IO_P87, output3, X, 506, 1, PULL0)," & -- PAD81
" 508 (BC_2, IO_P87, input, X)," & -- PAD81
" 509 (BC_2, *, internal, 1)," & -- PAD80.T
" 510 (BC_2, *, internal, X)," & -- PAD80.O
" 511 (BC_2, *, internal, X)," & -- PAD80.I
" 512 (BC_2, *, internal, 1)," & -- PAD79.T
" 513 (BC_2, *, internal, X)," & -- PAD79.O
" 514 (BC_2, *, internal, X)," & -- PAD79.I
" 515 (BC_2, *, internal, 1)," & -- PAD78.T
" 516 (BC_2, *, internal, X)," & -- PAD78.O
" 517 (BC_2, *, internal, X)," & -- PAD78.I
" 518 (BC_2, *, internal, 1)," & -- PAD77.T
" 519 (BC_2, *, internal, X)," & -- PAD77.O
" 520 (BC_2, *, internal, X)," & -- PAD77.I
" 521 (BC_2, *, controlr, 1)," &
" 522 (BC_2, IO_P89, output3, X, 521, 1, PULL0)," & -- PAD76
" 523 (BC_2, IO_P89, input, X)," & -- PAD76
" 524 (BC_2, *, controlr, 1)," &
" 525 (BC_2, IO_P90, output3, X, 524, 1, PULL0)," & -- PAD75
" 526 (BC_2, IO_P90, input, X)," & -- PAD75
" 527 (BC_2, *, controlr, 1)," &
" 528 (BC_2, IO_P92, output3, X, 527, 1, PULL0)," & -- PAD74
" 529 (BC_2, IO_P92, input, X)," & -- PAD74
" 530 (BC_2, *, controlr, 1)," &
" 531 (BC_2, IO_P93, output3, X, 530, 1, PULL0)," & -- PAD73
" 532 (BC_2, IO_P93, input, X)," & -- PAD73
" 533 (BC_2, *, internal, 1)," & -- PAD72.T
" 534 (BC_2, *, internal, X)," & -- PAD72.O
" 535 (BC_2, *, internal, X)," & -- PAD72.I
" 536 (BC_2, *, internal, 1)," & -- PAD71.T
" 537 (BC_2, *, internal, X)," & -- PAD71.O
" 538 (BC_2, *, internal, X)," & -- PAD71.I
" 539 (BC_2, *, internal, 1)," & -- PAD70.T
" 540 (BC_2, *, internal, X)," & -- PAD70.O
" 541 (BC_2, *, internal, X)," & -- PAD70.I
" 542 (BC_2, *, internal, 1)," & -- PAD69.T
" 543 (BC_2, *, internal, X)," & -- PAD69.O
" 544 (BC_2, *, internal, X)," & -- PAD69.I
" 545 (BC_2, *, controlr, 1)," &
" 546 (BC_2, IO_P95, output3, X, 545, 1, PULL0)," & -- PAD68
" 547 (BC_2, IO_P95, input, X)," & -- PAD68
" 548 (BC_2, *, controlr, 1)," &
" 549 (BC_2, IO_P96, output3, X, 548, 1, PULL0)," & -- PAD67
" 550 (BC_2, IO_P96, input, X)," & -- PAD67
" 551 (BC_2, *, controlr, 1)," &
" 552 (BC_2, IO_P97, output3, X, 551, 1, PULL0)," & -- PAD66
" 553 (BC_2, IO_P97, input, X)," & -- PAD66
" 554 (BC_2, *, controlr, 1)," &
" 555 (BC_2, IO_P98, output3, X, 554, 1, PULL0)," & -- PAD65
" 556 (BC_2, IO_P98, input, X)," & -- PAD65
" 557 (BC_2, *, controlr, 1)," &
" 558 (BC_2, IO_P99, output3, X, 557, 1, PULL0)," & -- PAD64
" 559 (BC_2, IO_P99, input, X)," & -- PAD64
" 560 (BC_2, *, controlr, 1)," &
" 561 (BC_2, IO_P100, output3, X, 560, 1, PULL0)," & -- PAD63
" 562 (BC_2, IO_P100, input, X)," & -- PAD63
" 563 (BC_2, *, controlr, 1)," &
" 564 (BC_2, IO_P102, output3, X, 563, 1, PULL0)," & -- PAD62
" 565 (BC_2, IO_P102, input, X)," & -- PAD62
" 566 (BC_2, *, controlr, 1)," &
" 567 (BC_2, IO_P103, output3, X, 566, 1, PULL0)," & -- PAD61
" 568 (BC_2, IO_P103, input, X)," & -- PAD61
" 569 (BC_2, *, controlr, 1)," &
" 570 (BC_2, IO_P104, output3, X, 569, 1, PULL0)," & -- PAD60
" 571 (BC_2, IO_P104, input, X)," & -- PAD60
" 572 (BC_2, *, controlr, 1)," &
" 573 (BC_2, IO_P105, output3, X, 572, 1, PULL0)," & -- PAD59
" 574 (BC_2, IO_P105, input, X)," & -- PAD59
" 575 (BC_2, *, internal, 1)," & -- PAD58.T
" 576 (BC_2, *, internal, X)," & -- PAD58.O
" 577 (BC_2, *, internal, X)," & -- PAD58.I
" 578 (BC_2, *, internal, 1)," & -- PAD57.T
" 579 (BC_2, *, internal, X)," & -- PAD57.O
" 580 (BC_2, *, internal, X)," & -- PAD57.I
" 581 (BC_2, *, internal, 1)," & -- PAD56.T
" 582 (BC_2, *, internal, X)," & -- PAD56.O
" 583 (BC_2, *, internal, X)," & -- PAD56.I
" 584 (BC_2, *, internal, 1)," & -- PAD55.T
" 585 (BC_2, *, internal, X)," & -- PAD55.O
" 586 (BC_2, *, internal, X)," & -- PAD55.I
" 587 (BC_2, *, internal, 1)," & -- PAD54.T
" 588 (BC_2, *, internal, X)," & -- PAD54.O
" 589 (BC_2, *, internal, X)," & -- PAD54.I
" 590 (BC_2, *, internal, 1)," & -- PAD53.T
" 591 (BC_2, *, internal, X)," & -- PAD53.O
" 592 (BC_2, *, internal, X)," & -- PAD53.I
" 593 (BC_2, *, controlr, 1)," &
" 594 (BC_2, IO_P107, output3, X, 593, 1, PULL0)," & -- PAD52
" 595 (BC_2, IO_P107, input, X)," & -- PAD52
" 596 (BC_2, *, controlr, 1)," &
" 597 (BC_2, IO_P108, output3, X, 596, 1, PULL0)," & -- PAD51
" 598 (BC_2, IO_P108, input, X)"; -- PAD51
attribute DESIGN_WARNING of XA3S200_TQ144 : entity is
"This is a preliminary BSDL file which has not been verified." &
"This BSDL file must be modified by the FPGA designer in order to" &
"reflect post-configuration behavior (if any)." &
"To avoid losing the current configuration, the boundary scan" &
"test vectors should keep the PROG_B pin" &
"high. If the PROG_B pin goes low by any means," &
"the configuration will be cleared." &
"PROG_B can only be captured, not updated." &
"The value at the pin is always used by the device." &
"HSWAP_EN, M0, M1, and M2 can only be captured, not updated." &
"The value at the pin is always used by the device." &
"The disable result of a 3-stated I/O in this file" &
"correspond to HSWAP_EN being high. When HSWAP_EN" &
"is low, change all PULL0s to PULL1." &
"In EXTEST, output and tristate values are not captured in the" &
"Capture-DR state - those register cells are unchanged." &
"In INTEST, the pin input values are not captured in the" &
"Capture-DR state - those register cells are unchanged." &
"The output and tristate capture values are not valid until after" &
"the device is configured." &
"The tristate control value is not captured properly when" &
"GTS is activated.";
end XA3S200_TQ144;