-- Copyright (C) 1998-2005 Altera Corporation
--
-- File Name : EP1C3T100.BSD
-- Device : EP1C3T100
-- Package : 100-Pin Thin Quad Flat Pack
-- BSDL Version : 3.12
-- BSDL Status : Final
-- Date Created : 10/07/2004
-- Created by : Altera BSDL Generation Program Ver. 1.23
-- Verification : Software syntax checked on:
-- Agilent Technologies 3070 BSDL Compiler
-- ASSET ScanWorks ver. 3.1.1
-- Corelis ScanPlus TPG ver. 4.04
-- Genrad BSDL syntax checker ver. 4.01, a component
-- of Scan Pathfinder(tm) and BasicSCAN(tm)
-- GOEPEL Electronics' CASCON-GALAXY(R) ver. 4.03a
-- JTAG Technologies BSDL Converter ver. 3.2
--
-- Documentation : Cyclone Family Datasheet
-- AN39: JTAG Boundary Scan Testing for Altera Devices
--
-- *********************************************************************
-- * IMPORTANT NOTICE *
-- *********************************************************************
--
-- Altera, Cyclone and EP1C3 are trademarks of Altera
-- Corporation. Altera products, marketed under trademarks, are
-- protected under numerous US and foreign patents and pending
-- applications, maskwork rights, and copyrights. Altera warrants
-- performance of its semiconductor products to current specifications
-- in accordance with Altera's standard warranty, but reserves the
-- right to make changes to any products and services at any time
-- without notice. Altera assumes no responsibility or liability
-- arising out of the application or use of any information, product,
-- or service described herein except as expressly agreed to in
-- writing by Altera Corporation. Altera customers are advised to
-- obtain the latest version of device specifications before relying
-- on any published information and before placing orders for products
-- or services.
--
-- *********************************************************************
-- * ENTITY DEFINITION WITH PORTS *
-- *********************************************************************
entity EP1C3T100 is
generic (PHYSICAL_PIN_MAP : string := "TQFP100");
port (
--I/O Pins
IO1 , IO2 , IO3 , IO4 , IO5 , IO6 , IO17 ,
IO20 , IO21 , IO22 , IO23 , IO24 , IO25 , IO26 ,
IO27 , IO28 , IO29 , IO34 , IO35 , IO36 , IO37 ,
IO38 , IO39 , IO40 , IO41 , IO42 , IO47 , IO48 ,
IO49 , IO50 , IO51 , IO52 , IO53 , IO54 , IO55 ,
IO56 , IO57 , IO65 , IO68 , IO69 , IO70 , IO71 ,
IO72 , IO73 , IO74 , IO75 , IO76 , IO77 , IO78 ,
IO79 , IO84 , IO85 , IO86 , IO87 , IO88 , IO89 ,
IO90 , IO91 , IO92 , IO97 , IO98 , IO99 , IO100
: inout bit;
--Cyclone Family-Specific Pins
CLK0 , CLK2 , DATA0 , MSEL0 ,
MSEL1 : in bit;
DCLK : inout bit;
CONF_DONE , NCE , NCEO , NCONFIG ,
NSTATUS : linkage bit;
--JTAG Ports
TCK , TMS , TDI : in bit;
TDO : out bit;
--Power Pins
VCC : linkage bit_vector (1 to 11);
--Ground Pins
GND : linkage bit_vector (1 to 11)
);
use STD_1149_1_1994.all;
attribute COMPONENT_CONFORMANCE of EP1C3T100 :
entity is "STD_1149_1_1993";
-- *********************************************************************
-- * PIN MAPPING *
-- *********************************************************************
attribute PIN_MAP of EP1C3T100 : entity is PHYSICAL_PIN_MAP;
constant TQFP100 : PIN_MAP_STRING :=
--I/O Pins
"IO1 : 1 , IO2 : 2 , IO3 : 3 , IO4 : 4 , "&
"IO5 : 5 , IO6 : 6 , IO17 : 17 , IO20 : 20 , "&
"IO21 : 21 , IO22 : 22 , IO23 : 23 , IO24 : 24 , "&
"IO25 : 25 , IO26 : 26 , IO27 : 27 , IO28 : 28 , "&
"IO29 : 29 , IO34 : 34 , IO35 : 35 , IO36 : 36 , "&
"IO37 : 37 , IO38 : 38 , IO39 : 39 , IO40 : 40 , "&
"IO41 : 41 , IO42 : 42 , IO47 : 47 , IO48 : 48 , "&
"IO49 : 49 , IO50 : 50 , IO51 : 51 , IO52 : 52 , "&
"IO53 : 53 , IO54 : 54 , IO55 : 55 , IO56 : 56 , "&
"IO57 : 57 , IO65 : 65 , IO68 : 68 , IO69 : 69 , "&
"IO70 : 70 , IO71 : 71 , IO72 : 72 , IO73 : 73 , "&
"IO74 : 74 , IO75 : 75 , IO76 : 76 , IO77 : 77 , "&
"IO78 : 78 , IO79 : 79 , IO84 : 84 , IO85 : 85 , "&
"IO86 : 86 , IO87 : 87 , IO88 : 88 , IO89 : 89 , "&
"IO90 : 90 , IO91 : 91 , IO92 : 92 , IO97 : 97 , "&
"IO98 : 98 , IO99 : 99 , IO100 : 100 , "&
--Cyclone Family-Specific Pins
"CLK0 : 10 , CLK2 : 66 , DATA0 : 7 , "&
"MSEL0 : 14 , MSEL1 : 15 , DCLK : 16 , "&
"CONF_DONE : 60 , NCE : 13 , NCEO : 12 , "&
"NCONFIG : 8 , NSTATUS : 61 , "&
--JTAG ports
"TCK : 62 , TMS : 63 , TDI : 67 , TDO : 64 , "&
--Power Pins
"VCC : (9 , 18 , 31 , 33 , 44 , 46 , 59 , 80 , "&
"82 , 93 , 95 ), "&
--Ground Pins
"GND : (11 , 19 , 30 , 32 , 43 , 45 , 58 , 81 , "&
"83 , 94 , 96 )";
-- *********************************************************************
-- * IEEE 1149.1 TAP PORTS *
-- *********************************************************************
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (10.00e6,BOTH);
-- *********************************************************************
-- * INSTRUCTIONS AND REGISTER ACCESS *
-- *********************************************************************
attribute INSTRUCTION_LENGTH of EP1C3T100 : entity is 10;
attribute INSTRUCTION_OPCODE of EP1C3T100 : entity is
"BYPASS (1111111111), "&
"EXTEST (0000000000), "&
"SAMPLE (0000000101), "&
"IDCODE (0000000110), "&
"USERCODE (0000000111), "&
"CLAMP (0000001010), "&
"HIGHZ (0000001011), "&
"CONFIG_IO (0000001101)";
attribute INSTRUCTION_CAPTURE of EP1C3T100 : entity is "0101010101";
attribute IDCODE_REGISTER of EP1C3T100 : entity is
"0000"& --4-bit Version
"0010000010000001"& --16-bit Part Number (hex 2081)
"00001101110"& --11-bit Manufacturer's Identity
"1"; --Mandatory LSB
attribute USERCODE_REGISTER of EP1C3T100 : entity is
"XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"; --All 32 bits are programmable
attribute REGISTER_ACCESS of EP1C3T100 : entity is
"DEVICE_ID (IDCODE),"&
"IOCSR[1989] (CONFIG_IO)";
-- *********************************************************************
-- * BOUNDARY SCAN CELL INFORMATION *
-- *********************************************************************
attribute BOUNDARY_LENGTH of EP1C3T100 : entity is 339;
attribute BOUNDARY_REGISTER of EP1C3T100 : entity is
--BSC group 0 for I/O pin 100
"0 (BC_1, IO100, input, X)," &
"1 (BC_1, *, control, 1)," &
"2 (BC_1, IO100, output3, X, 1, 1, Z)," &
--BSC group 1 for I/O pin 99
"3 (BC_1, IO99, input, X)," &
"4 (BC_1, *, control, 1)," &
"5 (BC_1, IO99, output3, X, 4, 1, Z)," &
--BSC group 2 for unused pad
"6 (BC_4, *, internal, X)," &
"7 (BC_4, *, internal, 1)," &
"8 (BC_4, *, internal, X)," &
--BSC group 3 for unused pad
"9 (BC_4, *, internal, X)," &
"10 (BC_4, *, internal, 1)," &
"11 (BC_4, *, internal, X)," &
--BSC group 4 for I/O pin 98
"12 (BC_1, IO98, input, X)," &
"13 (BC_1, *, control, 1)," &
"14 (BC_1, IO98, output3, X, 13, 1, Z)," &
--BSC group 5 for I/O pin 97
"15 (BC_1, IO97, input, X)," &
"16 (BC_1, *, control, 1)," &
"17 (BC_1, IO97, output3, X, 16, 1, Z)," &
--BSC group 6 for I/O pin 92
"18 (BC_1, IO92, input, X)," &
"19 (BC_1, *, control, 1)," &
"20 (BC_1, IO92, output3, X, 19, 1, Z)," &
--BSC group 7 for I/O pin 91
"21 (BC_1, IO91, input, X)," &
"22 (BC_1, *, control, 1)," &
"23 (BC_1, IO91, output3, X, 22, 1, Z)," &
--BSC group 8 for unused pad
"24 (BC_4, *, internal, X)," &
"25 (BC_4, *, internal, 1)," &
"26 (BC_4, *, internal, X)," &
--BSC group 9 for unused pad
"27 (BC_4, *, internal, X)," &
"28 (BC_4, *, internal, 1)," &
"29 (BC_4, *, internal, X)," &
--BSC group 10 for I/O pin 90
"30 (BC_1, IO90, input, X)," &
"31 (BC_1, *, control, 1)," &
"32 (BC_1, IO90, output3, X, 31, 1, Z)," &
--BSC group 11 for I/O pin 89
"33 (BC_1, IO89, input, X)," &
"34 (BC_1, *, control, 1)," &
"35 (BC_1, IO89, output3, X, 34, 1, Z)," &
--BSC group 12 for unused pad
"36 (BC_4, *, internal, X)," &
"37 (BC_4, *, internal, 1)," &
"38 (BC_4, *, internal, X)," &
--BSC group 13 for unused pad
"39 (BC_4, *, internal, X)," &
"40 (BC_4, *, internal, 1)," &
"41 (BC_4, *, internal, X)," &
--BSC group 14 for unused pad
"42 (BC_4, *, internal, X)," &
"43 (BC_4, *, internal, 1)," &
"44 (BC_4, *, internal, X)," &
--BSC group 15 for I/O pin 88
"45 (BC_1, IO88, input, X)," &
"46 (BC_1, *, control, 1)," &
"47 (BC_1, IO88, output3, X, 46, 1, Z)," &
--BSC group 16 for I/O pin 87
"48 (BC_1, IO87, input, X)," &
"49 (BC_1, *, control, 1)," &
"50 (BC_1, IO87, output3, X, 49, 1, Z)," &
--BSC group 17 for I/O pin 86
"51 (BC_1, IO86, input, X)," &
"52 (BC_1, *, control, 1)," &
"53 (BC_1, IO86, output3, X, 52, 1, Z)," &
--BSC group 18 for unused pad
"54 (BC_4, *, internal, X)," &
"55 (BC_4, *, internal, 1)," &
"56 (BC_4, *, internal, X)," &
--BSC group 19 for unused pad
"57 (BC_4, *, internal, X)," &
"58 (BC_4, *, internal, 1)," &
"59 (BC_4, *, internal, X)," &
--BSC group 20 for I/O pin 85
"60 (BC_1, IO85, input, X)," &
"61 (BC_1, *, control, 1)," &
"62 (BC_1, IO85, output3, X, 61, 1, Z)," &
--BSC group 21 for I/O pin 84
"63 (BC_1, IO84, input, X)," &
"64 (BC_1, *, control, 1)," &
"65 (BC_1, IO84, output3, X, 64, 1, Z)," &
--BSC group 22 for I/O pin 79
"66 (BC_1, IO79, input, X)," &
"67 (BC_1, *, control, 1)," &
"68 (BC_1, IO79, output3, X, 67, 1, Z)," &
--BSC group 23 for I/O pin 78
"69 (BC_1, IO78, input, X)," &
"70 (BC_1, *, control, 1)," &
"71 (BC_1, IO78, output3, X, 70, 1, Z)," &
--BSC group 24 for unused pad
"72 (BC_4, *, internal, X)," &
"73 (BC_4, *, internal, 1)," &
"74 (BC_4, *, internal, X)," &
--BSC group 25 for unused pad
"75 (BC_4, *, internal, X)," &
"76 (BC_4, *, internal, 1)," &
"77 (BC_4, *, internal, X)," &
--BSC group 26 for I/O pin 77
"78 (BC_1, IO77, input, X)," &
"79 (BC_1, *, control, 1)," &
"80 (BC_1, IO77, output3, X, 79, 1, Z)," &
--BSC group 27 for I/O pin 76
"81 (BC_1, IO76, input, X)," &
"82 (BC_1, *, control, 1)," &
"83 (BC_1, IO76, output3, X, 82, 1, Z)," &
--BSC group 28 for I/O pin 75
"84 (BC_1, IO75, input, X)," &
"85 (BC_1, *, control, 1)," &
"86 (BC_1, IO75, output3, X, 85, 1, Z)," &
--BSC group 29 for I/O pin 74
"87 (BC_1, IO74, input, X)," &
"88 (BC_1, *, control, 1)," &
"89 (BC_1, IO74, output3, X, 88, 1, Z)," &
--BSC group 30 for unused pad
"90 (BC_4, *, internal, X)," &
"91 (BC_4, *, internal, 1)," &
"92 (BC_4, *, internal, X)," &
--BSC group 31 for unused pad
"93 (BC_4, *, internal, X)," &
"94 (BC_4, *, internal, 1)," &
"95 (BC_4, *, internal, X)," &
--BSC group 32 for I/O pin 73
"96 (BC_1, IO73, input, X)," &
"97 (BC_1, *, control, 1)," &
"98 (BC_1, IO73, output3, X, 97, 1, Z)," &
--BSC group 33 for unused pad
"99 (BC_4, *, internal, X)," &
"100 (BC_4, *, internal, 1)," &
"101 (BC_4, *, internal, X)," &
--BSC group 34 for I/O pin 72
"102 (BC_1, IO72, input, X)," &
"103 (BC_1, *, control, 1)," &
"104 (BC_1, IO72, output3, X, 103, 1, Z)," &
--BSC group 35 for I/O pin 71
"105 (BC_1, IO71, input, X)," &
"106 (BC_1, *, control, 1)," &
"107 (BC_1, IO71, output3, X, 106, 1, Z)," &
--BSC group 36 for I/O pin 70
"108 (BC_1, IO70, input, X)," &
"109 (BC_1, *, control, 1)," &
"110 (BC_1, IO70, output3, X, 109, 1, Z)," &
--BSC group 37 for I/O pin 69
"111 (BC_1, IO69, input, X)," &
"112 (BC_1, *, control, 1)," &
"113 (BC_1, IO69, output3, X, 112, 1, Z)," &
--BSC group 38 for I/O pin 68
"114 (BC_1, IO68, input, X)," &
"115 (BC_1, *, control, 1)," &
"116 (BC_1, IO68, output3, X, 115, 1, Z)," &
--BSC group 39 for unused pad
"117 (BC_4, *, internal, X)," &
"118 (BC_4, *, internal, 1)," &
"119 (BC_4, *, internal, X)," &
--BSC group 40 for Family-specific input pin 66
"120 (BC_4, CLK2, input, X)," &
"121 (BC_4, *, internal, X)," &
"122 (BC_4, *, internal, X)," &
--BSC group 41 for unused pad *
"123 (BC_4, *, internal, X)," &
"124 (BC_4, *, internal, 1)," &
"125 (BC_4, *, internal, X)," &
--BSC group 42 for I/O pin 65
"126 (BC_1, IO65, input, X)," &
"127 (BC_1, *, control, 1)," &
"128 (BC_1, IO65, output3, X, 127, 1, Z)," &
--BSC group 43 for untestable Family-specific pin
"129 (BC_4, *, internal, X)," &
"130 (BC_4, *, internal, 1)," &
"131 (BC_4, *, internal, X)," &
--BSC group 44 for untestable Family-specific pin
"132 (BC_4, *, internal, X)," &
"133 (BC_4, *, internal, 1)," &
"134 (BC_4, *, internal, X)," &
--BSC group 45 for unused pad
"135 (BC_4, *, internal, X)," &
"136 (BC_4, *, internal, 1)," &
"137 (BC_4, *, internal, X)," &
--BSC group 46 for unused pad
"138 (BC_4, *, internal, X)," &
"139 (BC_4, *, internal, 1)," &
"140 (BC_4, *, internal, X)," &
--BSC group 47 for unused pad
"141 (BC_4, *, internal, X)," &
"142 (BC_4, *, internal, 1)," &
"143 (BC_4, *, internal, X)," &
--BSC group 48 for unused pad
"144 (BC_4, *, internal, X)," &
"145 (BC_4, *, internal, 1)," &
"146 (BC_4, *, internal, X)," &
--BSC group 49 for I/O pin 57
"147 (BC_1, IO57, input, X)," &
"148 (BC_1, *, control, 1)," &
"149 (BC_1, IO57, output3, X, 148, 1, Z)," &
--BSC group 50 for I/O pin 56
"150 (BC_1, IO56, input, X)," &
"151 (BC_1, *, control, 1)," &
"152 (BC_1, IO56, output3, X, 151, 1, Z)," &
--BSC group 51 for I/O pin 55
"153 (BC_1, IO55, input, X)," &
"154 (BC_1, *, control, 1)," &
"155 (BC_1, IO55, output3, X, 154, 1, Z)," &
--BSC group 52 for I/O pin 54
"156 (BC_1, IO54, input, X)," &
"157 (BC_1, *, control, 1)," &
"158 (BC_1, IO54, output3, X, 157, 1, Z)," &
--BSC group 53 for I/O pin 53
"159 (BC_1, IO53, input, X)," &
"160 (BC_1, *, control, 1)," &
"161 (BC_1, IO53, output3, X, 160, 1, Z)," &
--BSC group 54 for I/O pin 52
"162 (BC_1, IO52, input, X)," &
"163 (BC_1, *, control, 1)," &
"164 (BC_1, IO52, output3, X, 163, 1, Z)," &
--BSC group 55 for I/O pin 51
"165 (BC_1, IO51, input, X)," &
"166 (BC_1, *, control, 1)," &
"167 (BC_1, IO51, output3, X, 166, 1, Z)," &
--BSC group 56 for I/O pin 50
"168 (BC_1, IO50, input, X)," &
"169 (BC_1, *, control, 1)," &
"170 (BC_1, IO50, output3, X, 169, 1, Z)," &
--BSC group 57 for I/O pin 49
"171 (BC_1, IO49, input, X)," &
"172 (BC_1, *, control, 1)," &
"173 (BC_1, IO49, output3, X, 172, 1, Z)," &
--BSC group 58 for unused pad
"174 (BC_4, *, internal, X)," &
"175 (BC_4, *, internal, 1)," &
"176 (BC_4, *, internal, X)," &
--BSC group 59 for unused pad
"177 (BC_4, *, internal, X)," &
"178 (BC_4, *, internal, 1)," &
"179 (BC_4, *, internal, X)," &
--BSC group 60 for I/O pin 48
"180 (BC_1, IO48, input, X)," &
"181 (BC_1, *, control, 1)," &
"182 (BC_1, IO48, output3, X, 181, 1, Z)," &
--BSC group 61 for I/O pin 47
"183 (BC_1, IO47, input, X)," &
"184 (BC_1, *, control, 1)," &
"185 (BC_1, IO47, output3, X, 184, 1, Z)," &
--BSC group 62 for I/O pin 42
"186 (BC_1, IO42, input, X)," &
"187 (BC_1, *, control, 1)," &
"188 (BC_1, IO42, output3, X, 187, 1, Z)," &
--BSC group 63 for I/O pin 41
"189 (BC_1, IO41, input, X)," &
"190 (BC_1, *, control, 1)," &
"191 (BC_1, IO41, output3, X, 190, 1, Z)," &
--BSC group 64 for unused pad
"192 (BC_4, *, internal, X)," &
"193 (BC_4, *, internal, 1)," &
"194 (BC_4, *, internal, X)," &
--BSC group 65 for unused pad
"195 (BC_4, *, internal, X)," &
"196 (BC_4, *, internal, 1)," &
"197 (BC_4, *, internal, X)," &
--BSC group 66 for I/O pin 40
"198 (BC_1, IO40, input, X)," &
"199 (BC_1, *, control, 1)," &
"200 (BC_1, IO40, output3, X, 199, 1, Z)," &
--BSC group 67 for I/O pin 39
"201 (BC_1, IO39, input, X)," &
"202 (BC_1, *, control, 1)," &
"203 (BC_1, IO39, output3, X, 202, 1, Z)," &
--BSC group 68 for I/O pin 38
"204 (BC_1, IO38, input, X)," &
"205 (BC_1, *, control, 1)," &
"206 (BC_1, IO38, output3, X, 205, 1, Z)," &
--BSC group 69 for unused pad
"207 (BC_4, *, internal, X)," &
"208 (BC_4, *, internal, 1)," &
"209 (BC_4, *, internal, X)," &
--BSC group 70 for unused pad
"210 (BC_4, *, internal, X)," &
"211 (BC_4, *, internal, 1)," &
"212 (BC_4, *, internal, X)," &
--BSC group 71 for unused pad
"213 (BC_4, *, internal, X)," &
"214 (BC_4, *, internal, 1)," &
"215 (BC_4, *, internal, X)," &
--BSC group 72 for I/O pin 37
"216 (BC_1, IO37, input, X)," &
"217 (BC_1, *, control, 1)," &
"218 (BC_1, IO37, output3, X, 217, 1, Z)," &
--BSC group 73 for I/O pin 36
"219 (BC_1, IO36, input, X)," &
"220 (BC_1, *, control, 1)," &
"221 (BC_1, IO36, output3, X, 220, 1, Z)," &
--BSC group 74 for unused pad
"222 (BC_4, *, internal, X)," &
"223 (BC_4, *, internal, 1)," &
"224 (BC_4, *, internal, X)," &
--BSC group 75 for unused pad
"225 (BC_4, *, internal, X)," &
"226 (BC_4, *, internal, 1)," &
"227 (BC_4, *, internal, X)," &
--BSC group 76 for I/O pin 35
"228 (BC_1, IO35, input, X)," &
"229 (BC_1, *, control, 1)," &
"230 (BC_1, IO35, output3, X, 229, 1, Z)," &
--BSC group 77 for I/O pin 34
"231 (BC_1, IO34, input, X)," &
"232 (BC_1, *, control, 1)," &
"233 (BC_1, IO34, output3, X, 232, 1, Z)," &
--BSC group 78 for I/O pin 29
"234 (BC_1, IO29, input, X)," &
"235 (BC_1, *, control, 1)," &
"236 (BC_1, IO29, output3, X, 235, 1, Z)," &
--BSC group 79 for I/O pin 28
"237 (BC_1, IO28, input, X)," &
"238 (BC_1, *, control, 1)," &
"239 (BC_1, IO28, output3, X, 238, 1, Z)," &
--BSC group 80 for unused pad
"240 (BC_4, *, internal, X)," &
"241 (BC_4, *, internal, 1)," &
"242 (BC_4, *, internal, X)," &
--BSC group 81 for unused pad
"243 (BC_4, *, internal, X)," &
"244 (BC_4, *, internal, 1)," &
"245 (BC_4, *, internal, X)," &
--BSC group 82 for I/O pin 27
"246 (BC_1, IO27, input, X)," &
"247 (BC_1, *, control, 1)," &
"248 (BC_1, IO27, output3, X, 247, 1, Z)," &
--BSC group 83 for I/O pin 26
"249 (BC_1, IO26, input, X)," &
"250 (BC_1, *, control, 1)," &
"251 (BC_1, IO26, output3, X, 250, 1, Z)," &
--BSC group 84 for I/O pin 25
"252 (BC_1, IO25, input, X)," &
"253 (BC_1, *, control, 1)," &
"254 (BC_1, IO25, output3, X, 253, 1, Z)," &
--BSC group 85 for I/O pin 24
"255 (BC_1, IO24, input, X)," &
"256 (BC_1, *, control, 1)," &
"257 (BC_1, IO24, output3, X, 256, 1, Z)," &
--BSC group 86 for I/O pin 23
"258 (BC_1, IO23, input, X)," &
"259 (BC_1, *, control, 1)," &
"260 (BC_1, IO23, output3, X, 259, 1, Z)," &
--BSC group 87 for I/O pin 22
"261 (BC_1, IO22, input, X)," &
"262 (BC_1, *, control, 1)," &
"263 (BC_1, IO22, output3, X, 262, 1, Z)," &
--BSC group 88 for I/O pin 21
"264 (BC_1, IO21, input, X)," &
"265 (BC_1, *, control, 1)," &
"266 (BC_1, IO21, output3, X, 265, 1, Z)," &
--BSC group 89 for I/O pin 20
"267 (BC_1, IO20, input, X)," &
"268 (BC_1, *, control, 1)," &
"269 (BC_1, IO20, output3, X, 268, 1, Z)," &
--BSC group 90 for unused pad
"270 (BC_4, *, internal, X)," &
"271 (BC_4, *, internal, 1)," &
"272 (BC_4, *, internal, X)," &
--BSC group 91 for unused pad
"273 (BC_4, *, internal, X)," &
"274 (BC_4, *, internal, 1)," &
"275 (BC_4, *, internal, X)," &
--BSC group 92 for unused pad
"276 (BC_4, *, internal, X)," &
"277 (BC_4, *, internal, 1)," &
"278 (BC_4, *, internal, X)," &
--BSC group 93 for I/O pin 17
"279 (BC_1, IO17, input, X)," &
"280 (BC_1, *, control, 1)," &
"281 (BC_1, IO17, output3, X, 280, 1, Z)," &
--BSC group 94 for Family-specific bidir pin 16
"282 (BC_4, DCLK, input, X)," &
"283 (BC_1, *, control, 1)," &
"284 (BC_1, DCLK, output3, X, 283, 1, Z)," &
--BSC group 95 for Family-specific input pin 15
"285 (BC_4, MSEL1, input, X)," &
"286 (BC_4, *, internal, X)," &
"287 (BC_4, *, internal, X)," &
--BSC group 96 for Family-specific input pin 14
"288 (BC_4, MSEL0, input, X)," &
"289 (BC_4, *, internal, X)," &
"290 (BC_4, *, internal, X)," &
--BSC group 97 for untestable Family-specific pin
"291 (BC_4, *, internal, X)," &
"292 (BC_4, *, internal, 1)," &
"293 (BC_4, *, internal, X)," &
--BSC group 98 for untestable Family-specific pin
"294 (BC_4, *, internal, X)," &
"295 (BC_4, *, internal, 1)," &
"296 (BC_4, *, internal, X)," &
--BSC group 99 for unused pad *
"297 (BC_4, *, internal, X)," &
"298 (BC_4, *, internal, 1)," &
"299 (BC_4, *, internal, X)," &
--BSC group 100 for Family-specific input pin 10
"300 (BC_4, CLK0, input, X)," &
"301 (BC_4, *, internal, X)," &
"302 (BC_4, *, internal, X)," &
--BSC group 101 for untestable Family-specific pin
"303 (BC_4, *, internal, X)," &
"304 (BC_4, *, internal, 1)," &
"305 (BC_4, *, internal, X)," &
--BSC group 102 for Family-specific input pin 7
"306 (BC_4, DATA0, input, X)," &
"307 (BC_4, *, internal, X)," &
"308 (BC_4, *, internal, X)," &
--BSC group 103 for I/O pin 6
"309 (BC_1, IO6, input, X)," &
"310 (BC_1, *, control, 1)," &
"311 (BC_1, IO6, output3, X, 310, 1, Z)," &
--BSC group 104 for I/O pin 5
"312 (BC_1, IO5, input, X)," &
"313 (BC_1, *, control, 1)," &
"314 (BC_1, IO5, output3, X, 313, 1, Z)," &
--BSC group 105 for unused pad
"315 (BC_4, *, internal, X)," &
"316 (BC_4, *, internal, 1)," &
"317 (BC_4, *, internal, X)," &
--BSC group 106 for unused pad
"318 (BC_4, *, internal, X)," &
"319 (BC_4, *, internal, 1)," &
"320 (BC_4, *, internal, X)," &
--BSC group 107 for unused pad
"321 (BC_4, *, internal, X)," &
"322 (BC_4, *, internal, 1)," &
"323 (BC_4, *, internal, X)," &
--BSC group 108 for I/O pin 4
"324 (BC_1, IO4, input, X)," &
"325 (BC_1, *, control, 1)," &
"326 (BC_1, IO4, output3, X, 325, 1, Z)," &
--BSC group 109 for unused pad
"327 (BC_4, *, internal, X)," &
"328 (BC_4, *, internal, 1)," &
"329 (BC_4, *, internal, X)," &
--BSC group 110 for I/O pin 3
"330 (BC_1, IO3, input, X)," &
"331 (BC_1, *, control, 1)," &
"332 (BC_1, IO3, output3, X, 331, 1, Z)," &
--BSC group 111 for I/O pin 2
"333 (BC_1, IO2, input, X)," &
"334 (BC_1, *, control, 1)," &
"335 (BC_1, IO2, output3, X, 334, 1, Z)," &
--BSC group 112 for I/O pin 1
"336 (BC_1, IO1, input, X)," &
"337 (BC_1, *, control, 1)," &
"338 (BC_1, IO1, output3, X, 337, 1, Z)" ;
-- *********************************************************************
-- * DESIGN WARNING *
-- *********************************************************************
attribute DESIGN_WARNING of EP1C3T100 : entity is
"The EP1C3 devices support IEEE 1149.1 testing before and after "&
"device configuration; however, the devices do not support this "&
"testing during device configuration. The easiest way to avoid device "&
"configuration is to hold the nCONFIG pin low during power-up and "&
"testing.";
end EP1C3T100;
