-- Advanced Micro Devices MACH131 100 Pin PQFP BSDL description
--
-- Version 1.1, 4/27/1998: Remove HIGHZ JTAG instruction. jkb
--
-- Written By: Ben Lau
-- Date : May 30 1996
-- Version : 1.0
-- 10/08/1998: (Jan Buxton) Moved some instructions from private to public.
--
-- ****************************************************************
-- * Copywrite 1995 Advanced Micro Devices *
-- * All rights reserved. No part of this program or publication*
-- * may be reproduced, transmitted, transcribed, stored in a *
-- * retrieval system, or translated into any language or *
-- * computer language, in any form or by any means without this *
-- * notice appearing within. *
-- * One AMD Place Sunnyvale, CA 94086 *
-- ****************************************************************
-- * Advanced Micro Devices makes no warranty for the use of this*
-- * product and assumes no responsibility for any errors which *
-- * may appear within. Neither does it make a committment to *
-- * update this information. *
-- ****************************************************************
-- * This is the template BSDL file for the MACH131 to be used *
-- * for the purpose of verifying the parts compliance with the *
-- * IEEE standard 1149.1-1990. The BSDL languange is not at *
-- * this time a standard and IEEE holds no opinion on it or its *
-- * use. It has been submitted as a proposed addition to the *
-- * standard and should be voted on by the working committee *
-- * this year. *
-- ****************************************************************
--
-- This file has been verified by:
-- Teradyne VICTORY v 2.20
-- - Syntax Check using BSA
-- - Test vector generation using BSA
--
-- This file has NOT been verified by:
-- Hewlett-Packard Boundary-Scan Software
-- - Syntax Check
--
-- Genrad Boundary-Scan Software
-- - Syntax Check
-- - Physical Verification
--
-- ****************************************************************
-- Entity format: Mabcdddeeefggg
-- a = family (1, 2, 4, 5)
-- b = A for "A" type parts
-- c = Vcc level: 5, 3, 2, or 1 for 5.0, 3.3, 2.5, or 1.8 VDC
-- ddd = number of macrocells, such as 064
-- eee = number of I/O pins, such as 032
-- f = package: L, P, T, or B for PLCC, PQFP, TQFP, or BGA
-- ggg = number of pins, such as 044
entity M1_5064064P100 is
generic(PHYSICAL_PIN_MAP : string := "PQFP_100pin");
port (
DED_IN : in bit_vector(0 to 5); -- Clocks/Inputs
IO : inout bit_vector(0 to 63); -- I/O pins
TCK, TMS, TDI: in bit; -- JTAG inputs
TDO : out bit; -- JTAG outputs
NC : linkage bit_vector(0 to 1);
VCC : linkage bit_vector(0 to 7);
GND : linkage bit_vector(0 to 15)
);
use STD_1149_1_1990.all; -- get JTAG definitions and attributes
attribute PIN_MAP of M1_5064064P100 : entity is PHYSICAL_PIN_MAP;
constant PQFP_100pin : PIN_MAP_STRING :=
"DED_IN:(4,13,18,54,63,68), " & -- Dedicated Clock/Input Pins
"IO:( 93, 94, 95, 96, 97, 98, 99, 100," & -- I/O A
" 5, 6, 7, 8, 9, 10, 11, 12, " &
" 19, 20, 21, 22, 23, 24, 25, 26, " & -- I/O B
" 31, 32, 33, 34, 35, 36, 37, 38, " &
" 43, 44, 45, 46, 47, 48, 49, 50, " & -- I/O C
" 55, 56, 57, 58, 59, 60, 61, 62, " &
" 69, 70, 71, 72, 73, 74, 75, 76, " & -- I/O D
" 81, 82, 83, 84, 85, 86, 87, 88)," &
" TDI:3, TMS:53, TCK:28, TDO:78, " & -- JTAG
"NC :(27,77), " & -- No Connect
"VCC:(14,15,39,42,64,65,89,92)," & -- POWER
"GND:(1,2,16,17,29,30,40,41,51," &
"52,66,67,79,80,90,91)"; -- GROUND PINS
-- END OF PIN DEFINITION
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (20.0e6, BOTH);
-- Instruction register definitions
attribute INSTRUCTION_LENGTH of M1_5064064P100 : entity is 6;
attribute INSTRUCTION_OPCODE of M1_5064064P100 : entity is
"BYPASS (111111)," &
"EXTEST (000000)," &
"SAMPLE (000010)," &
"IDCODE (000001)," &
"HIGHZ (010001)," &
"PRIV003 (000011)," &
"PRIV004 (000100)," &
"PRIV005 (000101)," &
"PRIV006 (000110)," &
"PRIV007 (000111)," &
"PRIV008 (001000)," &
"PRIV00F (001111)," &
"PRIVATE (001110,001101,110000,100101," &
"100110,100111,101110,110011,110010)";
attribute INSTRUCTION_CAPTURE of M1_5064064P100 : entity is "000001";
attribute INSTRUCTION_PRIVATE of M1_5064064P100 : entity is "PRIVATE";
attribute IDCODE_REGISTER of M1_5064064P100 : entity is
"0000" & -- version number
"0111010011111000" & -- part identification
"00000000001" & -- company code
"1"; -- mandatory 1
attribute REGISTER_ACCESS of M1_5064064P100 : entity is
"BYPASS (BYPASS,HIGHZ, PRIV005, PRIV006, PRIV008)," &
"BOUNDARY (EXTEST,SAMPLE)," &
"ROWREG[62](PRIV003)," &
"COLREG[288](PRIV004, PRIV007)," &
"PRIVR00F[5](PRIV00F)";
-- **************************************************************
-- * BOUNDARY SCAN CELL REGISTER DESCRIPTION *
-- * MACH1xx-ISP parts do not have boundary scan cells. *
-- **************************************************************
attribute BOUNDARY_CELLS of M1_5064064P100 : entity is "BC_3";
attribute BOUNDARY_LENGTH of M1_5064064P100 : entity is 1;
attribute BOUNDARY_REGISTER of M1_5064064P100: entity is
"0 (BC_3, *, INTERNAL, X)";
end M1_5064064P100;