-------------------------------------------------------------------------
-- --
-- Copyright Microchip Technology Inc. 2017. All rights reserved. --
-- --
-- --
-- IMPORTANT NOTICE --
-- --
-- --
-- Software License Agreement --
-- --
-- The software supplied herewith by Microchip Technology Incorporated --
-- (the "Company") for its PICmicro� Microcontroller is intended and --
-- supplied to you, the Company's customer, for use solely and --
-- exclusively on Microchip PICmicro Microcontroller products. The --
-- software is owned by the Company and/or its supplier, and is --
-- protected under applicable copyright laws. All rights are reserved. --
-- Any use in violation of the foregoing restrictions may subject the --
-- user to criminal sanctions under applicable laws, as well as to --
-- civil liability for the breach of the terms and conditions of this --
-- license. --
-- THIS SOFTWARE IS PROVIDED IN AN "AS IS" CONDITION. NO WARRANTIES, --
-- WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED --
-- TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A --
-- PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, --
-- IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR --
-- CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. --
-------------------------------------------------------------------------
-- BSDL file
-- File Name: PIC18F27Q84_PDIP.bsd
-- File Revision: Revision: 1.0
-- Date created: Date: February 4, 2021
-- Device: PIC18F27Q84
-- Silicon Rev: N/A
-- Package: 28-pin PDIP
-- Notes:
-- 1. The behavior of the Oscillator Boundary Scan cells are dependant
-- on the Oscillator Fuse settings, and therefore caution must be used
-- when controlling the the BSC's on RA7, RA6.
-- ************************************************************************
-- * PORT DEFINITIONS *
-- ************************************************************************
entity PIC18F27Q84 is
generic (PHYSICAL_PIN_MAP : string := "PDIP28");
port (
VDD1 :linkage bit;
VSS1 :linkage bit;
VSS2 :linkage bit;
RA1 :inout bit;
RA2 :inout bit;
RA3 :inout bit;
RA4 :inout bit;
RA6 :inout bit;
RA7 :inout bit;
RB0 :inout bit;
RB1 :inout bit;
RB2 :inout bit;
RB4 :inout bit;
RB6 :inout bit;
RB7 :inout bit;
RC0 :inout bit;
RC1 :inout bit;
RC2 :inout bit;
RC3 :inout bit;
RC4 :inout bit;
RC5 :inout bit;
RC6 :inout bit;
RC7 :inout bit;
MCLR :inout bit;
TCK :in bit;
TDI :in bit;
TDO :out bit;
TMS :in bit
);
use STD_1149_1_2001.all;
attribute COMPONENT_CONFORMANCE of PIC18F27Q84 : entity is "STD_1149_1_2001";
-- *********************************************************************
-- * PIN MAPPING *
-- *********************************************************************
attribute PIN_MAP of PIC18F27Q84 : entity is PHYSICAL_PIN_MAP;
constant PDIP28 : PIN_MAP_STRING :=
--I/O Pins
" RC7: 18 ,"&
" VSS2: 19 ,"&
" VDD1: 20 ,"&
" RB0: 21 ,"&
" RB1: 22 ,"&
" RB2: 23 ,"&
" TDO: 24 ,"&
" RB4: 25 ,"&
" TDI: 26 ,"&
" RB6: 27 ,"&
" RB7: 28 ,"&
" MCLR: 1 ,"&
" TMS: 2 ,"&
" RA1: 3 ,"&
" RA2: 4 ,"&
" RA3: 5 ,"&
" RA4: 6 ,"&
" TCK: 7 ,"&
" VSS1: 8 ,"&
" RA7: 9 ,"&
" RA6: 10 ,"&
" RC0: 11 ,"&
" RC1: 12 ,"&
" RC2: 13 ,"&
" RC3: 14 ,"&
" RC4: 15 ,"&
" RC5: 16 ,"&
" RC6: 17 ";
-- *********************************************************************
-- * IEEE 1149.1 TAP PORTS *
-- *********************************************************************
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (10.00e6,BOTH);
-- *********************************************************************
-- * INSTRUCTIONS AND REGISTER ACCESS *
-- *********************************************************************
attribute INSTRUCTION_LENGTH of PIC18F27Q84 : entity is 4;
attribute INSTRUCTION_OPCODE of PIC18F27Q84 : entity is
"extest (0110)," &
"bypass (1111)," &
"sample (0010)," &
"preload (0010)," &
"highz (0000)," &
"idcode (0001)" ;
attribute INSTRUCTION_CAPTURE of PIC18F27Q84 : entity is "0001";
attribute IDCODE_REGISTER of PIC18F27Q84 : entity is
"XXXX" & -- Version - With a MASK on device revision
"1001100100000011" & -- Part number
"00000101001" & -- Manufacturer ID = 00000101001
"1"; -- Required by IEEE std 1149.1-2001
attribute REGISTER_ACCESS of PIC18F27Q84 : entity is
"BOUNDARY (extest, sample, preload), " &
"DEVICE_ID (idcode), " &
"BYPASS (bypass, highz)" ;
-- *********************************************************************
-- * BOUNDARY SCAN CELL INFORMATION *
-- *********************************************************************
attribute BOUNDARY_LENGTH of PIC18F27Q84 : entity is 63;
attribute BOUNDARY_REGISTER of PIC18F27Q84 : entity is
--BSC group 0 for I/O pin 18
" 0 ( BC_1 , RC7, input, X)," &
" 1 ( BC_1 , *, control, 0)," &
" 2 ( BC_1 , RC7, output3, X, 1, 0, Z)," &
--BSC group 1 for I/O pin 21
" 3 ( BC_1 , RB0, input, X)," &
" 4 ( BC_1 , *, control, 0)," &
" 5 ( BC_1 , RB0, output3, X, 4, 0, Z)," &
--BSC group 2 for I/O pin 22
" 6 ( BC_1 , RB1, input, X)," &
" 7 ( BC_1 , *, control, 0)," &
" 8 ( BC_1 , RB1, output3, X, 7, 0, Z)," &
--BSC group 3 for I/O pin 23
" 9 ( BC_1 , RB2, input, X)," &
" 10 ( BC_1 , *, control, 0)," &
" 11 ( BC_1 , RB2, output3, X, 10, 0, Z)," &
--BSC group 4 for I/O pin 25
" 12 ( BC_1 , RB4, input, X)," &
" 13 ( BC_1 , *, control, 0)," &
" 14 ( BC_1 , RB4, output3, X, 13, 0, Z)," &
--BSC group 5 for I/O pin 27
" 15 ( BC_1 , RB6, input, X)," &
" 16 ( BC_1 , *, control, 0)," &
" 17 ( BC_1 , RB6, output3, X, 16, 0, Z)," &
--BSC group 6 for I/O pin 28
" 18 ( BC_1 , RB7, input, X)," &
" 19 ( BC_1 , *, control, 0)," &
" 20 ( BC_1 , RB7, output3, X, 19, 0, Z)," &
--BSC group 7 for I/O pin 1
" 21 ( BC_1 , MCLR, input, X)," &
" 22 ( BC_1 , *, control, 0)," &
" 23 ( BC_1 , MCLR, output3, X, 22, 0, Z)," &
--BSC group 8 for I/O pin 3
" 24 ( BC_1 , RA1, input, X)," &
" 25 ( BC_1 , *, control, 0)," &
" 26 ( BC_1 , RA1, output3, X, 25, 0, Z)," &
--BSC group 9 for I/O pin 4
" 27 ( BC_1 , RA2, input, X)," &
" 28 ( BC_1 , *, control, 0)," &
" 29 ( BC_1 , RA2, output3, X, 28, 0, Z)," &
--BSC group 10 for I/O pin 5
" 30 ( BC_1 , RA3, input, X)," &
" 31 ( BC_1 , *, control, 0)," &
" 32 ( BC_1 , RA3, output3, X, 31, 0, Z)," &
--BSC group 11 for I/O pin 6
" 33 ( BC_1 , RA4, input, X)," &
" 34 ( BC_1 , *, control, 0)," &
" 35 ( BC_1 , RA4, output3, X, 34, 0, Z)," &
--BSC group 12 for I/O pin 9
" 36 ( BC_1 , RA7, input, X)," &
" 37 ( BC_1 , *, control, 0)," &
" 38 ( BC_1 , RA7, output3, X, 37, 0, Z)," &
--BSC group 13 for I/O pin 10
" 39 ( BC_1 , RA6, input, X)," &
" 40 ( BC_1 , *, control, 0)," &
" 41 ( BC_1 , RA6, output3, X, 40, 0, Z)," &
--BSC group 14 for I/O pin 11
" 42 ( BC_1 , RC0, input, X)," &
" 43 ( BC_1 , *, control, 0)," &
" 44 ( BC_1 , RC0, output3, X, 43, 0, Z)," &
--BSC group 15 for I/O pin 12
" 45 ( BC_1 , RC1, input, X)," &
" 46 ( BC_1 , *, control, 0)," &
" 47 ( BC_1 , RC1, output3, X, 46, 0, Z)," &
--BSC group 16 for I/O pin 13
" 48 ( BC_1 , RC2, input, X)," &
" 49 ( BC_1 , *, control, 0)," &
" 50 ( BC_1 , RC2, output3, X, 49, 0, Z)," &
--BSC group 17 for I/O pin 14
" 51 ( BC_1 , RC3, input, X)," &
" 52 ( BC_1 , *, control, 0)," &
" 53 ( BC_1 , RC3, output3, X, 52, 0, Z)," &
--BSC group 18 for I/O pin 15
" 54 ( BC_1 , RC4, input, X)," &
" 55 ( BC_1 , *, control, 0)," &
" 56 ( BC_1 , RC4, output3, X, 55, 0, Z)," &
--BSC group 19 for I/O pin 16
" 57 ( BC_1 , RC5, input, X)," &
" 58 ( BC_1 , *, control, 0)," &
" 59 ( BC_1 , RC5, output3, X, 58, 0, Z)," &
--BSC group 20 for I/O pin 17
" 60 ( BC_1 , RC6, input, X)," &
" 61 ( BC_1 , *, control, 0)," &
" 62 ( BC_1 , RC6, output3, X, 61, 0, Z)";
end PIC18F27Q84;