--$ XILINX$RCSfile: xa3s50_pq208.bsd,v $
--$ XILINX$Revision: 1.1 $
--
-- BSDL file for device XA3S50, package PQ208
-- Xilinx, Inc. $State: PRELIMINARY $ $Date: 2004/12/22 23:37:16 $
-- Generated by createBSDL 2.21
--
-- For technical support, http://support.xilinx.com -> enter text 'bsdl'
-- in the text search box at the left of the page. If none of
-- these records resolve your problem you should open a web support case
-- or contact our technical support at:
--
-- North America 1-800-255-7778 hotline@xilinx.com
-- United Kingdom +44 870 7350 610 eurosupport@xilinx.com
-- France (33) 1 3463 0100 eurosupport@xilinx.com
-- Germany (49) 89 991 54930 eurosupport@xilinx.com
-- Japan (81) 3-3297-9163 jhotline@xilinx.com
--
-- This BSDL file reflects the pre-configuration JTAG behavior. To reflect
-- the post-configuration JTAG behavior (if any), edit this file as described
-- below. Many of these changes are demonstrated by commented-out template
-- lines preceeding the lines they would replace:
--
-- 1. Enable USER instructions as appropriate (see below).
-- 2. Set disable result of all pads as configured.
-- 3. Set safe state of boundary cells as necessary.
-- 4. Rename entity if necessary to avoid name collisions.
-- 5. Modify USERCODE value in USERCODE_REGISTER declaration.
--
-- To prevent losing the current configuration, the boundary scan
-- test vectors should keep the PROG_B pin high.
--
-- PROG_B can only be captured, not updated. The value
-- at the pin is always used by the device.
--
-- All IOBs prior to configuration, and unused and output-only IOBs following
-- configuration, will sense their pad values during boundary-scan with an LVCMOS25
-- input buffer. In order to properly capture a logic high value at one
-- of these IOBs into its input boundary scan cell, VCCO must be
-- at least 1.7V (Vih for LVCMOS25).
--
-- For post-configuration boundary scan only: If an IOB is configured to use
-- an input standard that uses VREF pins, then the boundary scan test vectors
-- must keep the used VREF pins 3-stated.
--
-- The disable result of a 3-stated I/O in this file correspond
-- to HSWAP_EN being high. If HSWAP_EN is low, every PULL0 should
-- be changed to PULL1.
--
-- HSWAP_EN, M0, M1, and M2 can only be captured, not updated. The value
-- at the pin is always used by the device.
entity XA3S50_PQ208 is
generic (PHYSICAL_PIN_MAP : string := "PQ208" );
port (
GND: linkage bit_vector (1 to 28);
CCLK_P104: inout bit;
DONE_P103: inout bit;
HSWAP_EN_P206: in bit;
M0_P55: in bit;
M1_P54: in bit;
M2_P56: in bit;
PROG_B: in bit;
TCK: in bit;
TDI: in bit;
TDO: out bit;
TMS: in bit;
VCCAUX: linkage bit_vector (1 to 8);
VCCINT: linkage bit_vector (1 to 4);
VCCO0: linkage bit_vector (1 to 2);
VCCO1: linkage bit_vector (1 to 2);
VCCO2: linkage bit_vector (1 to 2);
VCCO3: linkage bit_vector (1 to 2);
VCCO4: linkage bit_vector (1 to 2);
VCCO5: linkage bit_vector (1 to 2);
VCCO6: linkage bit_vector (1 to 2);
VCCO7: linkage bit_vector (1 to 2);
IO_P2: inout bit; -- PAD124
IO_P3: inout bit; -- PAD123
IO_P7: inout bit; -- PAD122
IO_P9: inout bit; -- PAD121
IO_P10: inout bit; -- PAD120
IO_P11: inout bit; -- PAD119
IO_P12: inout bit; -- PAD118
IO_P13: inout bit; -- PAD117
IO_P15: inout bit; -- PAD116
IO_P16: inout bit; -- PAD115
IO_P18: inout bit; -- PAD114
IO_P19: inout bit; -- PAD113
IO_P20: inout bit; -- PAD112
IO_P21: inout bit; -- PAD111
IO_P26: inout bit; -- PAD110
IO_P27: inout bit; -- PAD109
IO_P28: inout bit; -- PAD108
IO_P29: inout bit; -- PAD107
IO_P34: inout bit; -- PAD106
IO_P35: inout bit; -- PAD105
IO_P36: inout bit; -- PAD104
IO_P37: inout bit; -- PAD103
IO_P39: inout bit; -- PAD102
IO_P40: inout bit; -- PAD101
IO_P42: inout bit; -- PAD100
IO_P43: inout bit; -- PAD99
IO_P44: inout bit; -- PAD98
IO_P45: inout bit; -- PAD97
IO_P46: inout bit; -- PAD96
IO_P48: inout bit; -- PAD95
IO_P51: inout bit; -- PAD94
IO_P52: inout bit; -- PAD93
IO_P57: inout bit; -- PAD92
IO_P58: inout bit; -- PAD91
IO_P61: inout bit; -- PAD90
IO_P62: inout bit; -- PAD89
IO_P63: inout bit; -- PAD88
IO_P64: inout bit; -- PAD87
IO_P65: inout bit; -- PAD86
IO_P67: inout bit; -- PAD85
IO_P68: inout bit; -- PAD84
IO_P71: inout bit; -- PAD83
IO_P72: inout bit; -- PAD82
IO_P74: inout bit; -- PAD81
IO_P76: inout bit; -- PAD80
IO_P77: inout bit; -- PAD79
IO_P78: inout bit; -- PAD78
IO_P79: inout bit; -- PAD77
IO_P80: inout bit; -- PAD76
IO_P81: inout bit; -- PAD75
IO_P83: inout bit; -- PAD74
IO_P85: inout bit; -- PAD73
IO_P86: inout bit; -- PAD72
IO_P87: inout bit; -- PAD71
IO_P90: inout bit; -- PAD70
IO_P92: inout bit; -- PAD69
IO_P93: inout bit; -- PAD68
IO_P94: inout bit; -- PAD67
IO_P95: inout bit; -- PAD66
IO_P100: inout bit; -- PAD65
IO_P101: inout bit; -- PAD64
IO_P102: inout bit; -- PAD63
IO_P106: inout bit; -- PAD62
IO_P107: inout bit; -- PAD61
IO_P111: inout bit; -- PAD60
IO_P113: inout bit; -- PAD59
IO_P114: inout bit; -- PAD58
IO_P115: inout bit; -- PAD57
IO_P116: inout bit; -- PAD56
IO_P117: inout bit; -- PAD55
IO_P119: inout bit; -- PAD54
IO_P120: inout bit; -- PAD53
IO_P122: inout bit; -- PAD52
IO_P123: inout bit; -- PAD51
IO_P124: inout bit; -- PAD50
IO_P125: inout bit; -- PAD49
IO_P130: inout bit; -- PAD48
IO_P131: inout bit; -- PAD47
IO_P132: inout bit; -- PAD46
IO_P133: inout bit; -- PAD45
IO_P138: inout bit; -- PAD44
IO_P139: inout bit; -- PAD43
IO_P140: inout bit; -- PAD42
IO_P141: inout bit; -- PAD41
IO_P143: inout bit; -- PAD40
IO_P144: inout bit; -- PAD39
IO_P146: inout bit; -- PAD38
IO_P147: inout bit; -- PAD37
IO_P148: inout bit; -- PAD36
IO_P149: inout bit; -- PAD35
IO_P150: inout bit; -- PAD34
IO_P152: inout bit; -- PAD33
IO_P155: inout bit; -- PAD32
IO_P156: inout bit; -- PAD31
IO_P161: inout bit; -- PAD30
IO_P162: inout bit; -- PAD29
IO_P165: inout bit; -- PAD28
IO_P166: inout bit; -- PAD27
IO_P167: inout bit; -- PAD26
IO_P168: inout bit; -- PAD25
IO_P169: inout bit; -- PAD24
IO_P171: inout bit; -- PAD23
IO_P172: inout bit; -- PAD22
IO_P175: inout bit; -- PAD21
IO_P176: inout bit; -- PAD20
IO_P178: inout bit; -- PAD19
IO_P180: inout bit; -- PAD18
IO_P181: inout bit; -- PAD17
IO_P182: inout bit; -- PAD16
IO_P183: inout bit; -- PAD15
IO_P184: inout bit; -- PAD14
IO_P185: inout bit; -- PAD13
IO_P187: inout bit; -- PAD12
IO_P189: inout bit; -- PAD11
IO_P190: inout bit; -- PAD10
IO_P191: inout bit; -- PAD9
IO_P194: inout bit; -- PAD8
IO_P196: inout bit; -- PAD7
IO_P197: inout bit; -- PAD6
IO_P198: inout bit; -- PAD5
IO_P199: inout bit; -- PAD4
IO_P203: inout bit; -- PAD3
IO_P204: inout bit; -- PAD2
IO_P205: inout bit -- PAD1
); --end port list
use STD_1149_1_1994.all;
attribute COMPONENT_CONFORMANCE of XA3S50_PQ208 : entity is
"STD_1149_1_1993";
attribute PIN_MAP of XA3S50_PQ208 : entity is PHYSICAL_PIN_MAP;
constant PQ208: PIN_MAP_STRING:=
"GND:(P1,P8,P14,P25,P30,P41,P47,P53,P59,P66," &
"P75,P82,P91,P99,P105,P112,P118,P129,P134,P145," &
"P151,P157,P163,P170,P179,P186,P195,P202)," &
"CCLK_P104:P104," &
"DONE_P103:P103," &
"HSWAP_EN_P206:P206," &
"M0_P55:P55," &
"M1_P54:P54," &
"M2_P56:P56," &
"PROG_B:P207," &
"TCK:P159," &
"TDI:P208," &
"TDO:P158," &
"TMS:P160," &
"VCCAUX:(P17,P38,P69,P89,P121,P142,P173,P193)," &
"VCCINT:(P70,P88,P174,P192)," &
"VCCO0:(P188,P201)," &
"VCCO1:(P164,P177)," &
"VCCO2:(P136,P153)," &
"VCCO3:(P110,P127)," &
"VCCO4:(P84,P98)," &
"VCCO5:(P60,P73)," &
"VCCO6:(P32,P49)," &
"VCCO7:(P6,P23)," &
"IO_P2:P2," &
"IO_P3:P3," &
"IO_P7:P7," &
"IO_P9:P9," &
"IO_P10:P10," &
"IO_P11:P11," &
"IO_P12:P12," &
"IO_P13:P13," &
"IO_P15:P15," &
"IO_P16:P16," &
"IO_P18:P18," &
"IO_P19:P19," &
"IO_P20:P20," &
"IO_P21:P21," &
"IO_P26:P26," &
"IO_P27:P27," &
"IO_P28:P28," &
"IO_P29:P29," &
"IO_P34:P34," &
"IO_P35:P35," &
"IO_P36:P36," &
"IO_P37:P37," &
"IO_P39:P39," &
"IO_P40:P40," &
"IO_P42:P42," &
"IO_P43:P43," &
"IO_P44:P44," &
"IO_P45:P45," &
"IO_P46:P46," &
"IO_P48:P48," &
"IO_P51:P51," &
"IO_P52:P52," &
"IO_P57:P57," &
"IO_P58:P58," &
"IO_P61:P61," &
"IO_P62:P62," &
"IO_P63:P63," &
"IO_P64:P64," &
"IO_P65:P65," &
"IO_P67:P67," &
"IO_P68:P68," &
"IO_P71:P71," &
"IO_P72:P72," &
"IO_P74:P74," &
"IO_P76:P76," &
"IO_P77:P77," &
"IO_P78:P78," &
"IO_P79:P79," &
"IO_P80:P80," &
"IO_P81:P81," &
"IO_P83:P83," &
"IO_P85:P85," &
"IO_P86:P86," &
"IO_P87:P87," &
"IO_P90:P90," &
"IO_P92:P92," &
"IO_P93:P93," &
"IO_P94:P94," &
"IO_P95:P95," &
"IO_P100:P100," &
"IO_P101:P101," &
"IO_P102:P102," &
"IO_P106:P106," &
"IO_P107:P107," &
"IO_P111:P111," &
"IO_P113:P113," &
"IO_P114:P114," &
"IO_P115:P115," &
"IO_P116:P116," &
"IO_P117:P117," &
"IO_P119:P119," &
"IO_P120:P120," &
"IO_P122:P122," &
"IO_P123:P123," &
"IO_P124:P124," &
"IO_P125:P125," &
"IO_P130:P130," &
"IO_P131:P131," &
"IO_P132:P132," &
"IO_P133:P133," &
"IO_P138:P138," &
"IO_P139:P139," &
"IO_P140:P140," &
"IO_P141:P141," &
"IO_P143:P143," &
"IO_P144:P144," &
"IO_P146:P146," &
"IO_P147:P147," &
"IO_P148:P148," &
"IO_P149:P149," &
"IO_P150:P150," &
"IO_P152:P152," &
"IO_P155:P155," &
"IO_P156:P156," &
"IO_P161:P161," &
"IO_P162:P162," &
"IO_P165:P165," &
"IO_P166:P166," &
"IO_P167:P167," &
"IO_P168:P168," &
"IO_P169:P169," &
"IO_P171:P171," &
"IO_P172:P172," &
"IO_P175:P175," &
"IO_P176:P176," &
"IO_P178:P178," &
"IO_P180:P180," &
"IO_P181:P181," &
"IO_P182:P182," &
"IO_P183:P183," &
"IO_P184:P184," &
"IO_P185:P185," &
"IO_P187:P187," &
"IO_P189:P189," &
"IO_P190:P190," &
"IO_P191:P191," &
"IO_P194:P194," &
"IO_P196:P196," &
"IO_P197:P197," &
"IO_P198:P198," &
"IO_P199:P199," &
"IO_P203:P203," &
"IO_P204:P204," &
"IO_P205:P205";
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (33.0e6, BOTH);
attribute COMPLIANCE_PATTERNS of XA3S50_PQ208 : entity is
"(PROG_B) (1)";
attribute INSTRUCTION_LENGTH of XA3S50_PQ208 : entity is 6;
attribute INSTRUCTION_OPCODE of XA3S50_PQ208 : entity is
"EXTEST (000000)," &
"SAMPLE (000001)," &
"USER1 (000010)," & -- Not available until after configuration
"USER2 (000011)," & -- Not available until after configuration
"CFG_OUT (000100)," & -- Not available during configuration with another mode.
"CFG_IN (000101)," & -- Not available during configuration with another mode.
"INTEST (000111)," &
"USERCODE (001000)," &
"IDCODE (001001)," &
"HIGHZ (001010)," &
"JPROGRAM (001011)," & -- Not available during configuration with another mode.
"JSTART (001100)," & -- Not available during configuration with another mode.
"JSHUTDOWN (001101)," & -- Not available during configuration with another mode.
"BYPASS (111111)," &
"ISC_ENABLE (010000)," &
"ISC_PROGRAM (010001)," &
"ISC_NOOP (010100)," &
"ISC_READ (010101)," &
"ISC_DISABLE (010110)";
attribute INSTRUCTION_CAPTURE of XA3S50_PQ208 : entity is
-- Bit 5 is 1 when DONE is released (part of startup sequence)
-- Bit 4 is 1 if house-cleaning is complete
-- Bit 3 is ISC_Enabled
-- Bit 2 is ISC_Done
"XXXX01";
attribute INSTRUCTION_PRIVATE of XA3S50_PQ208 : entity is
-- If the device is configured, and a USER instruction is implemented
-- and not private to the FPGA designer, then it should be removed
-- from INSTRUCTION_PRIVATE, and the target register should be defined
-- in REGISTER_ACCESS.
"USER1," &
"USER2," &
"CFG_OUT," &
"CFG_IN," &
"JPROGRAM," &
"JSTART," &
"JSHUTDOWN," &
"ISC_ENABLE," &
"ISC_PROGRAM," &
"ISC_NOOP," &
"ISC_READ," &
"ISC_DISABLE";
attribute IDCODE_REGISTER of XA3S50_PQ208 : entity is
"XXXX" & -- version
"0001010" & -- family
"000001101" & -- array size
"00001001001" & -- manufacturer
"1"; -- required by 1149.1
attribute USERCODE_REGISTER of XA3S50_PQ208 : entity is
"XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX";
attribute REGISTER_ACCESS of XA3S50_PQ208 : entity is
-- "<reg_name>[<length>] (USER1)," &
-- "<reg_name>[<length>] (USER2)," &
"BYPASS (HIGHZ,BYPASS)," &
"DEVICE_ID (USERCODE,IDCODE)," &
"BOUNDARY (SAMPLE,INTEST,EXTEST)";
attribute BOUNDARY_LENGTH of XA3S50_PQ208 : entity is 383;
attribute BOUNDARY_REGISTER of XA3S50_PQ208 : entity is
-- cellnum (type, port, function, safe[, ccell, disval, disrslt])
" 0 (BC_2, *, controlr, 1)," &
" 1 (BC_2, IO_P161, output3, X, 0, 1, PULL0)," & -- PAD30
" 2 (BC_2, IO_P161, input, X)," & -- PAD30
" 3 (BC_2, *, controlr, 1)," &
" 4 (BC_2, IO_P162, output3, X, 3, 1, PULL0)," & -- PAD29
" 5 (BC_2, IO_P162, input, X)," & -- PAD29
" 6 (BC_2, *, controlr, 1)," &
" 7 (BC_2, IO_P165, output3, X, 6, 1, PULL0)," & -- PAD28
" 8 (BC_2, IO_P165, input, X)," & -- PAD28
" 9 (BC_2, *, controlr, 1)," &
" 10 (BC_2, IO_P166, output3, X, 9, 1, PULL0)," & -- PAD27
" 11 (BC_2, IO_P166, input, X)," & -- PAD27
" 12 (BC_2, *, controlr, 1)," &
" 13 (BC_2, IO_P167, output3, X, 12, 1, PULL0)," & -- PAD26
" 14 (BC_2, IO_P167, input, X)," & -- PAD26
" 15 (BC_2, *, controlr, 1)," &
" 16 (BC_2, IO_P168, output3, X, 15, 1, PULL0)," & -- PAD25
" 17 (BC_2, IO_P168, input, X)," & -- PAD25
" 18 (BC_2, *, controlr, 1)," &
" 19 (BC_2, IO_P169, output3, X, 18, 1, PULL0)," & -- PAD24
" 20 (BC_2, IO_P169, input, X)," & -- PAD24
" 21 (BC_2, *, controlr, 1)," &
" 22 (BC_2, IO_P171, output3, X, 21, 1, PULL0)," & -- PAD23
" 23 (BC_2, IO_P171, input, X)," & -- PAD23
" 24 (BC_2, *, controlr, 1)," &
" 25 (BC_2, IO_P172, output3, X, 24, 1, PULL0)," & -- PAD22
" 26 (BC_2, IO_P172, input, X)," & -- PAD22
" 27 (BC_2, *, controlr, 1)," &
" 28 (BC_2, IO_P175, output3, X, 27, 1, PULL0)," & -- PAD21
" 29 (BC_2, IO_P175, input, X)," & -- PAD21
" 30 (BC_2, *, controlr, 1)," &
" 31 (BC_2, IO_P176, output3, X, 30, 1, PULL0)," & -- PAD20
" 32 (BC_2, IO_P176, input, X)," & -- PAD20
" 33 (BC_2, *, controlr, 1)," &
" 34 (BC_2, IO_P178, output3, X, 33, 1, PULL0)," & -- PAD19
" 35 (BC_2, IO_P178, input, X)," & -- PAD19
" 36 (BC_2, *, controlr, 1)," &
" 37 (BC_2, IO_P180, output3, X, 36, 1, PULL0)," & -- PAD18
" 38 (BC_2, IO_P180, input, X)," & -- PAD18
" 39 (BC_2, *, controlr, 1)," &
" 40 (BC_2, IO_P181, output3, X, 39, 1, PULL0)," & -- PAD17
" 41 (BC_2, IO_P181, input, X)," & -- PAD17
" 42 (BC_2, *, controlr, 1)," &
" 43 (BC_2, IO_P182, output3, X, 42, 1, PULL0)," & -- PAD16
" 44 (BC_2, IO_P182, input, X)," & -- PAD16
" 45 (BC_2, *, controlr, 1)," &
" 46 (BC_2, IO_P183, output3, X, 45, 1, PULL0)," & -- PAD15
" 47 (BC_2, IO_P183, input, X)," & -- PAD15
" 48 (BC_2, *, controlr, 1)," &
" 49 (BC_2, IO_P184, output3, X, 48, 1, PULL0)," & -- PAD14
" 50 (BC_2, IO_P184, input, X)," & -- PAD14
" 51 (BC_2, *, controlr, 1)," &
" 52 (BC_2, IO_P185, output3, X, 51, 1, PULL0)," & -- PAD13
" 53 (BC_2, IO_P185, input, X)," & -- PAD13
" 54 (BC_2, *, controlr, 1)," &
" 55 (BC_2, IO_P187, output3, X, 54, 1, PULL0)," & -- PAD12
" 56 (BC_2, IO_P187, input, X)," & -- PAD12
" 57 (BC_2, *, controlr, 1)," &
" 58 (BC_2, IO_P189, output3, X, 57, 1, PULL0)," & -- PAD11
" 59 (BC_2, IO_P189, input, X)," & -- PAD11
" 60 (BC_2, *, controlr, 1)," &
" 61 (BC_2, IO_P190, output3, X, 60, 1, PULL0)," & -- PAD10
" 62 (BC_2, IO_P190, input, X)," & -- PAD10
" 63 (BC_2, *, controlr, 1)," &
" 64 (BC_2, IO_P191, output3, X, 63, 1, PULL0)," & -- PAD9
" 65 (BC_2, IO_P191, input, X)," & -- PAD9
" 66 (BC_2, *, controlr, 1)," &
" 67 (BC_2, IO_P194, output3, X, 66, 1, PULL0)," & -- PAD8
" 68 (BC_2, IO_P194, input, X)," & -- PAD8
" 69 (BC_2, *, controlr, 1)," &
" 70 (BC_2, IO_P196, output3, X, 69, 1, PULL0)," & -- PAD7
" 71 (BC_2, IO_P196, input, X)," & -- PAD7
" 72 (BC_2, *, controlr, 1)," &
" 73 (BC_2, IO_P197, output3, X, 72, 1, PULL0)," & -- PAD6
" 74 (BC_2, IO_P197, input, X)," & -- PAD6
" 75 (BC_2, *, controlr, 1)," &
" 76 (BC_2, IO_P198, output3, X, 75, 1, PULL0)," & -- PAD5
" 77 (BC_2, IO_P198, input, X)," & -- PAD5
" 78 (BC_2, *, controlr, 1)," &
" 79 (BC_2, IO_P199, output3, X, 78, 1, PULL0)," & -- PAD4
" 80 (BC_2, IO_P199, input, X)," & -- PAD4
" 81 (BC_2, *, controlr, 1)," &
" 82 (BC_2, IO_P203, output3, X, 81, 1, PULL0)," & -- PAD3
" 83 (BC_2, IO_P203, input, X)," & -- PAD3
" 84 (BC_2, *, controlr, 1)," &
" 85 (BC_2, IO_P204, output3, X, 84, 1, PULL0)," & -- PAD2
" 86 (BC_2, IO_P204, input, X)," & -- PAD2
" 87 (BC_2, *, controlr, 1)," &
" 88 (BC_2, IO_P205, output3, X, 87, 1, PULL0)," & -- PAD1
" 89 (BC_2, IO_P205, input, X)," & -- PAD1
" 90 (BC_2, HSWAP_EN_P206, input, X)," &
" 91 (BC_2, *, internal, 1)," & -- PROG_B.I
" 92 (BC_2, *, controlr, 1)," &
" 93 (BC_2, IO_P2, output3, X, 92, 1, PULL0)," & -- PAD124
" 94 (BC_2, IO_P2, input, X)," & -- PAD124
" 95 (BC_2, *, controlr, 1)," &
" 96 (BC_2, IO_P3, output3, X, 95, 1, PULL0)," & -- PAD123
" 97 (BC_2, IO_P3, input, X)," & -- PAD123
" 98 (BC_2, *, controlr, 1)," &
" 99 (BC_2, IO_P7, output3, X, 98, 1, PULL0)," & -- PAD122
" 100 (BC_2, IO_P7, input, X)," & -- PAD122
" 101 (BC_2, *, controlr, 1)," &
" 102 (BC_2, IO_P9, output3, X, 101, 1, PULL0)," & -- PAD121
" 103 (BC_2, IO_P9, input, X)," & -- PAD121
" 104 (BC_2, *, controlr, 1)," &
" 105 (BC_2, IO_P10, output3, X, 104, 1, PULL0)," & -- PAD120
" 106 (BC_2, IO_P10, input, X)," & -- PAD120
" 107 (BC_2, *, controlr, 1)," &
" 108 (BC_2, IO_P11, output3, X, 107, 1, PULL0)," & -- PAD119
" 109 (BC_2, IO_P11, input, X)," & -- PAD119
" 110 (BC_2, *, controlr, 1)," &
" 111 (BC_2, IO_P12, output3, X, 110, 1, PULL0)," & -- PAD118
" 112 (BC_2, IO_P12, input, X)," & -- PAD118
" 113 (BC_2, *, controlr, 1)," &
" 114 (BC_2, IO_P13, output3, X, 113, 1, PULL0)," & -- PAD117
" 115 (BC_2, IO_P13, input, X)," & -- PAD117
" 116 (BC_2, *, controlr, 1)," &
" 117 (BC_2, IO_P15, output3, X, 116, 1, PULL0)," & -- PAD116
" 118 (BC_2, IO_P15, input, X)," & -- PAD116
" 119 (BC_2, *, controlr, 1)," &
" 120 (BC_2, IO_P16, output3, X, 119, 1, PULL0)," & -- PAD115
" 121 (BC_2, IO_P16, input, X)," & -- PAD115
" 122 (BC_2, *, controlr, 1)," &
" 123 (BC_2, IO_P18, output3, X, 122, 1, PULL0)," & -- PAD114
" 124 (BC_2, IO_P18, input, X)," & -- PAD114
" 125 (BC_2, *, controlr, 1)," &
" 126 (BC_2, IO_P19, output3, X, 125, 1, PULL0)," & -- PAD113
" 127 (BC_2, IO_P19, input, X)," & -- PAD113
" 128 (BC_2, *, controlr, 1)," &
" 129 (BC_2, IO_P20, output3, X, 128, 1, PULL0)," & -- PAD112
" 130 (BC_2, IO_P20, input, X)," & -- PAD112
" 131 (BC_2, *, controlr, 1)," &
" 132 (BC_2, IO_P21, output3, X, 131, 1, PULL0)," & -- PAD111
" 133 (BC_2, IO_P21, input, X)," & -- PAD111
" 134 (BC_2, *, controlr, 1)," &
" 135 (BC_2, IO_P26, output3, X, 134, 1, PULL0)," & -- PAD110
" 136 (BC_2, IO_P26, input, X)," & -- PAD110
" 137 (BC_2, *, controlr, 1)," &
" 138 (BC_2, IO_P27, output3, X, 137, 1, PULL0)," & -- PAD109
" 139 (BC_2, IO_P27, input, X)," & -- PAD109
" 140 (BC_2, *, controlr, 1)," &
" 141 (BC_2, IO_P28, output3, X, 140, 1, PULL0)," & -- PAD108
" 142 (BC_2, IO_P28, input, X)," & -- PAD108
" 143 (BC_2, *, controlr, 1)," &
" 144 (BC_2, IO_P29, output3, X, 143, 1, PULL0)," & -- PAD107
" 145 (BC_2, IO_P29, input, X)," & -- PAD107
" 146 (BC_2, *, controlr, 1)," &
" 147 (BC_2, IO_P34, output3, X, 146, 1, PULL0)," & -- PAD106
" 148 (BC_2, IO_P34, input, X)," & -- PAD106
" 149 (BC_2, *, controlr, 1)," &
" 150 (BC_2, IO_P35, output3, X, 149, 1, PULL0)," & -- PAD105
" 151 (BC_2, IO_P35, input, X)," & -- PAD105
" 152 (BC_2, *, controlr, 1)," &
" 153 (BC_2, IO_P36, output3, X, 152, 1, PULL0)," & -- PAD104
" 154 (BC_2, IO_P36, input, X)," & -- PAD104
" 155 (BC_2, *, controlr, 1)," &
" 156 (BC_2, IO_P37, output3, X, 155, 1, PULL0)," & -- PAD103
" 157 (BC_2, IO_P37, input, X)," & -- PAD103
" 158 (BC_2, *, controlr, 1)," &
" 159 (BC_2, IO_P39, output3, X, 158, 1, PULL0)," & -- PAD102
" 160 (BC_2, IO_P39, input, X)," & -- PAD102
" 161 (BC_2, *, controlr, 1)," &
" 162 (BC_2, IO_P40, output3, X, 161, 1, PULL0)," & -- PAD101
" 163 (BC_2, IO_P40, input, X)," & -- PAD101
" 164 (BC_2, *, controlr, 1)," &
" 165 (BC_2, IO_P42, output3, X, 164, 1, PULL0)," & -- PAD100
" 166 (BC_2, IO_P42, input, X)," & -- PAD100
" 167 (BC_2, *, controlr, 1)," &
" 168 (BC_2, IO_P43, output3, X, 167, 1, PULL0)," & -- PAD99
" 169 (BC_2, IO_P43, input, X)," & -- PAD99
" 170 (BC_2, *, controlr, 1)," &
" 171 (BC_2, IO_P44, output3, X, 170, 1, PULL0)," & -- PAD98
" 172 (BC_2, IO_P44, input, X)," & -- PAD98
" 173 (BC_2, *, controlr, 1)," &
" 174 (BC_2, IO_P45, output3, X, 173, 1, PULL0)," & -- PAD97
" 175 (BC_2, IO_P45, input, X)," & -- PAD97
" 176 (BC_2, *, controlr, 1)," &
" 177 (BC_2, IO_P46, output3, X, 176, 1, PULL0)," & -- PAD96
" 178 (BC_2, IO_P46, input, X)," & -- PAD96
" 179 (BC_2, *, controlr, 1)," &
" 180 (BC_2, IO_P48, output3, X, 179, 1, PULL0)," & -- PAD95
" 181 (BC_2, IO_P48, input, X)," & -- PAD95
" 182 (BC_2, *, controlr, 1)," &
" 183 (BC_2, IO_P51, output3, X, 182, 1, PULL0)," & -- PAD94
" 184 (BC_2, IO_P51, input, X)," & -- PAD94
" 185 (BC_2, *, controlr, 1)," &
" 186 (BC_2, IO_P52, output3, X, 185, 1, PULL0)," & -- PAD93
" 187 (BC_2, IO_P52, input, X)," & -- PAD93
" 188 (BC_2, M1_P54, input, X)," &
" 189 (BC_2, M0_P55, input, X)," &
" 190 (BC_2, M2_P56, input, X)," &
" 191 (BC_2, *, controlr, 1)," &
" 192 (BC_2, IO_P57, output3, X, 191, 1, PULL0)," & -- PAD92
" 193 (BC_2, IO_P57, input, X)," & -- PAD92
" 194 (BC_2, *, controlr, 1)," &
" 195 (BC_2, IO_P58, output3, X, 194, 1, PULL0)," & -- PAD91
" 196 (BC_2, IO_P58, input, X)," & -- PAD91
" 197 (BC_2, *, controlr, 1)," &
" 198 (BC_2, IO_P61, output3, X, 197, 1, PULL0)," & -- PAD90
" 199 (BC_2, IO_P61, input, X)," & -- PAD90
" 200 (BC_2, *, controlr, 1)," &
" 201 (BC_2, IO_P62, output3, X, 200, 1, PULL0)," & -- PAD89
" 202 (BC_2, IO_P62, input, X)," & -- PAD89
" 203 (BC_2, *, controlr, 1)," &
" 204 (BC_2, IO_P63, output3, X, 203, 1, PULL0)," & -- PAD88
" 205 (BC_2, IO_P63, input, X)," & -- PAD88
" 206 (BC_2, *, controlr, 1)," &
" 207 (BC_2, IO_P64, output3, X, 206, 1, PULL0)," & -- PAD87
" 208 (BC_2, IO_P64, input, X)," & -- PAD87
" 209 (BC_2, *, controlr, 1)," &
" 210 (BC_2, IO_P65, output3, X, 209, 1, PULL0)," & -- PAD86
" 211 (BC_2, IO_P65, input, X)," & -- PAD86
" 212 (BC_2, *, controlr, 1)," &
" 213 (BC_2, IO_P67, output3, X, 212, 1, PULL0)," & -- PAD85
" 214 (BC_2, IO_P67, input, X)," & -- PAD85
" 215 (BC_2, *, controlr, 1)," &
" 216 (BC_2, IO_P68, output3, X, 215, 1, PULL0)," & -- PAD84
" 217 (BC_2, IO_P68, input, X)," & -- PAD84
" 218 (BC_2, *, controlr, 1)," &
" 219 (BC_2, IO_P71, output3, X, 218, 1, PULL0)," & -- PAD83
" 220 (BC_2, IO_P71, input, X)," & -- PAD83
" 221 (BC_2, *, controlr, 1)," &
" 222 (BC_2, IO_P72, output3, X, 221, 1, PULL0)," & -- PAD82
" 223 (BC_2, IO_P72, input, X)," & -- PAD82
" 224 (BC_2, *, controlr, 1)," &
" 225 (BC_2, IO_P74, output3, X, 224, 1, PULL0)," & -- PAD81
" 226 (BC_2, IO_P74, input, X)," & -- PAD81
" 227 (BC_2, *, controlr, 1)," &
" 228 (BC_2, IO_P76, output3, X, 227, 1, PULL0)," & -- PAD80
" 229 (BC_2, IO_P76, input, X)," & -- PAD80
" 230 (BC_2, *, controlr, 1)," &
" 231 (BC_2, IO_P77, output3, X, 230, 1, PULL0)," & -- PAD79
" 232 (BC_2, IO_P77, input, X)," & -- PAD79
" 233 (BC_2, *, controlr, 1)," &
" 234 (BC_2, IO_P78, output3, X, 233, 1, PULL0)," & -- PAD78
" 235 (BC_2, IO_P78, input, X)," & -- PAD78
" 236 (BC_2, *, controlr, 1)," &
" 237 (BC_2, IO_P79, output3, X, 236, 1, PULL0)," & -- PAD77
" 238 (BC_2, IO_P79, input, X)," & -- PAD77
" 239 (BC_2, *, controlr, 1)," &
" 240 (BC_2, IO_P80, output3, X, 239, 1, PULL0)," & -- PAD76
" 241 (BC_2, IO_P80, input, X)," & -- PAD76
" 242 (BC_2, *, controlr, 1)," &
" 243 (BC_2, IO_P81, output3, X, 242, 1, PULL0)," & -- PAD75
" 244 (BC_2, IO_P81, input, X)," & -- PAD75
" 245 (BC_2, *, controlr, 1)," &
" 246 (BC_2, IO_P83, output3, X, 245, 1, PULL0)," & -- PAD74
" 247 (BC_2, IO_P83, input, X)," & -- PAD74
" 248 (BC_2, *, controlr, 1)," &
" 249 (BC_2, IO_P85, output3, X, 248, 1, PULL0)," & -- PAD73
" 250 (BC_2, IO_P85, input, X)," & -- PAD73
" 251 (BC_2, *, controlr, 1)," &
" 252 (BC_2, IO_P86, output3, X, 251, 1, PULL0)," & -- PAD72
" 253 (BC_2, IO_P86, input, X)," & -- PAD72
" 254 (BC_2, *, controlr, 1)," &
" 255 (BC_2, IO_P87, output3, X, 254, 1, PULL0)," & -- PAD71
" 256 (BC_2, IO_P87, input, X)," & -- PAD71
" 257 (BC_2, *, controlr, 1)," &
" 258 (BC_2, IO_P90, output3, X, 257, 1, PULL0)," & -- PAD70
" 259 (BC_2, IO_P90, input, X)," & -- PAD70
" 260 (BC_2, *, controlr, 1)," &
" 261 (BC_2, IO_P92, output3, X, 260, 1, PULL0)," & -- PAD69
" 262 (BC_2, IO_P92, input, X)," & -- PAD69
" 263 (BC_2, *, controlr, 1)," &
" 264 (BC_2, IO_P93, output3, X, 263, 1, PULL0)," & -- PAD68
" 265 (BC_2, IO_P93, input, X)," & -- PAD68
" 266 (BC_2, *, controlr, 1)," &
" 267 (BC_2, IO_P94, output3, X, 266, 1, PULL0)," & -- PAD67
" 268 (BC_2, IO_P94, input, X)," & -- PAD67
" 269 (BC_2, *, controlr, 1)," &
" 270 (BC_2, IO_P95, output3, X, 269, 1, PULL0)," & -- PAD66
" 271 (BC_2, IO_P95, input, X)," & -- PAD66
" 272 (BC_2, *, controlr, 1)," &
" 273 (BC_2, IO_P100, output3, X, 272, 1, PULL0)," & -- PAD65
" 274 (BC_2, IO_P100, input, X)," & -- PAD65
" 275 (BC_2, *, controlr, 1)," &
" 276 (BC_2, IO_P101, output3, X, 275, 1, PULL0)," & -- PAD64
" 277 (BC_2, IO_P101, input, X)," & -- PAD64
" 278 (BC_2, *, controlr, 1)," &
" 279 (BC_2, IO_P102, output3, X, 278, 1, PULL0)," & -- PAD63
" 280 (BC_2, IO_P102, input, X)," & -- PAD63
" 281 (BC_2, *, controlr, 1)," &
" 282 (BC_2, DONE_P103, output3, X, 281, 1, PULL1)," &
" 283 (BC_2, DONE_P103, input, X)," &
" 284 (BC_2, *, controlr, 1)," &
" 285 (BC_2, CCLK_P104, output3, X, 284, 1, PULL1)," &
" 286 (BC_2, CCLK_P104, input, X)," &
" 287 (BC_2, *, controlr, 1)," &
" 288 (BC_2, IO_P106, output3, X, 287, 1, PULL0)," & -- PAD62
" 289 (BC_2, IO_P106, input, X)," & -- PAD62
" 290 (BC_2, *, controlr, 1)," &
" 291 (BC_2, IO_P107, output3, X, 290, 1, PULL0)," & -- PAD61
" 292 (BC_2, IO_P107, input, X)," & -- PAD61
" 293 (BC_2, *, controlr, 1)," &
" 294 (BC_2, IO_P111, output3, X, 293, 1, PULL0)," & -- PAD60
" 295 (BC_2, IO_P111, input, X)," & -- PAD60
" 296 (BC_2, *, controlr, 1)," &
" 297 (BC_2, IO_P113, output3, X, 296, 1, PULL0)," & -- PAD59
" 298 (BC_2, IO_P113, input, X)," & -- PAD59
" 299 (BC_2, *, controlr, 1)," &
" 300 (BC_2, IO_P114, output3, X, 299, 1, PULL0)," & -- PAD58
" 301 (BC_2, IO_P114, input, X)," & -- PAD58
" 302 (BC_2, *, controlr, 1)," &
" 303 (BC_2, IO_P115, output3, X, 302, 1, PULL0)," & -- PAD57
" 304 (BC_2, IO_P115, input, X)," & -- PAD57
" 305 (BC_2, *, controlr, 1)," &
" 306 (BC_2, IO_P116, output3, X, 305, 1, PULL0)," & -- PAD56
" 307 (BC_2, IO_P116, input, X)," & -- PAD56
" 308 (BC_2, *, controlr, 1)," &
" 309 (BC_2, IO_P117, output3, X, 308, 1, PULL0)," & -- PAD55
" 310 (BC_2, IO_P117, input, X)," & -- PAD55
" 311 (BC_2, *, controlr, 1)," &
" 312 (BC_2, IO_P119, output3, X, 311, 1, PULL0)," & -- PAD54
" 313 (BC_2, IO_P119, input, X)," & -- PAD54
" 314 (BC_2, *, controlr, 1)," &
" 315 (BC_2, IO_P120, output3, X, 314, 1, PULL0)," & -- PAD53
" 316 (BC_2, IO_P120, input, X)," & -- PAD53
" 317 (BC_2, *, controlr, 1)," &
" 318 (BC_2, IO_P122, output3, X, 317, 1, PULL0)," & -- PAD52
" 319 (BC_2, IO_P122, input, X)," & -- PAD52
" 320 (BC_2, *, controlr, 1)," &
" 321 (BC_2, IO_P123, output3, X, 320, 1, PULL0)," & -- PAD51
" 322 (BC_2, IO_P123, input, X)," & -- PAD51
" 323 (BC_2, *, controlr, 1)," &
" 324 (BC_2, IO_P124, output3, X, 323, 1, PULL0)," & -- PAD50
" 325 (BC_2, IO_P124, input, X)," & -- PAD50
" 326 (BC_2, *, controlr, 1)," &
" 327 (BC_2, IO_P125, output3, X, 326, 1, PULL0)," & -- PAD49
" 328 (BC_2, IO_P125, input, X)," & -- PAD49
" 329 (BC_2, *, controlr, 1)," &
" 330 (BC_2, IO_P130, output3, X, 329, 1, PULL0)," & -- PAD48
" 331 (BC_2, IO_P130, input, X)," & -- PAD48
" 332 (BC_2, *, controlr, 1)," &
" 333 (BC_2, IO_P131, output3, X, 332, 1, PULL0)," & -- PAD47
" 334 (BC_2, IO_P131, input, X)," & -- PAD47
" 335 (BC_2, *, controlr, 1)," &
" 336 (BC_2, IO_P132, output3, X, 335, 1, PULL0)," & -- PAD46
" 337 (BC_2, IO_P132, input, X)," & -- PAD46
" 338 (BC_2, *, controlr, 1)," &
" 339 (BC_2, IO_P133, output3, X, 338, 1, PULL0)," & -- PAD45
" 340 (BC_2, IO_P133, input, X)," & -- PAD45
" 341 (BC_2, *, controlr, 1)," &
" 342 (BC_2, IO_P138, output3, X, 341, 1, PULL0)," & -- PAD44
" 343 (BC_2, IO_P138, input, X)," & -- PAD44
" 344 (BC_2, *, controlr, 1)," &
" 345 (BC_2, IO_P139, output3, X, 344, 1, PULL0)," & -- PAD43
" 346 (BC_2, IO_P139, input, X)," & -- PAD43
" 347 (BC_2, *, controlr, 1)," &
" 348 (BC_2, IO_P140, output3, X, 347, 1, PULL0)," & -- PAD42
" 349 (BC_2, IO_P140, input, X)," & -- PAD42
" 350 (BC_2, *, controlr, 1)," &
" 351 (BC_2, IO_P141, output3, X, 350, 1, PULL0)," & -- PAD41
" 352 (BC_2, IO_P141, input, X)," & -- PAD41
" 353 (BC_2, *, controlr, 1)," &
" 354 (BC_2, IO_P143, output3, X, 353, 1, PULL0)," & -- PAD40
" 355 (BC_2, IO_P143, input, X)," & -- PAD40
" 356 (BC_2, *, controlr, 1)," &
" 357 (BC_2, IO_P144, output3, X, 356, 1, PULL0)," & -- PAD39
" 358 (BC_2, IO_P144, input, X)," & -- PAD39
" 359 (BC_2, *, controlr, 1)," &
" 360 (BC_2, IO_P146, output3, X, 359, 1, PULL0)," & -- PAD38
" 361 (BC_2, IO_P146, input, X)," & -- PAD38
" 362 (BC_2, *, controlr, 1)," &
" 363 (BC_2, IO_P147, output3, X, 362, 1, PULL0)," & -- PAD37
" 364 (BC_2, IO_P147, input, X)," & -- PAD37
" 365 (BC_2, *, controlr, 1)," &
" 366 (BC_2, IO_P148, output3, X, 365, 1, PULL0)," & -- PAD36
" 367 (BC_2, IO_P148, input, X)," & -- PAD36
" 368 (BC_2, *, controlr, 1)," &
" 369 (BC_2, IO_P149, output3, X, 368, 1, PULL0)," & -- PAD35
" 370 (BC_2, IO_P149, input, X)," & -- PAD35
" 371 (BC_2, *, controlr, 1)," &
" 372 (BC_2, IO_P150, output3, X, 371, 1, PULL0)," & -- PAD34
" 373 (BC_2, IO_P150, input, X)," & -- PAD34
" 374 (BC_2, *, controlr, 1)," &
" 375 (BC_2, IO_P152, output3, X, 374, 1, PULL0)," & -- PAD33
" 376 (BC_2, IO_P152, input, X)," & -- PAD33
" 377 (BC_2, *, controlr, 1)," &
" 378 (BC_2, IO_P155, output3, X, 377, 1, PULL0)," & -- PAD32
" 379 (BC_2, IO_P155, input, X)," & -- PAD32
" 380 (BC_2, *, controlr, 1)," &
" 381 (BC_2, IO_P156, output3, X, 380, 1, PULL0)," & -- PAD31
" 382 (BC_2, IO_P156, input, X)"; -- PAD31
attribute DESIGN_WARNING of XA3S50_PQ208 : entity is
"This is a preliminary BSDL file which has not been verified." &
"This BSDL file must be modified by the FPGA designer in order to" &
"reflect post-configuration behavior (if any)." &
"To avoid losing the current configuration, the boundary scan" &
"test vectors should keep the PROG_B pin" &
"high. If the PROG_B pin goes low by any means," &
"the configuration will be cleared." &
"PROG_B can only be captured, not updated." &
"The value at the pin is always used by the device." &
"HSWAP_EN, M0, M1, and M2 can only be captured, not updated." &
"The value at the pin is always used by the device." &
"The disable result of a 3-stated I/O in this file" &
"correspond to HSWAP_EN being high. When HSWAP_EN" &
"is low, change all PULL0s to PULL1." &
"In EXTEST, output and tristate values are not captured in the" &
"Capture-DR state - those register cells are unchanged." &
"In INTEST, the pin input values are not captured in the" &
"Capture-DR state - those register cells are unchanged." &
"The output and tristate capture values are not valid until after" &
"the device is configured." &
"The tristate control value is not captured properly when" &
"GTS is activated.";
end XA3S50_PQ208;