BSDL Files Library for JTAG

The only free public library that contains thousands of BSDL (Boundary Scan Description Language) models to use with BScan/JTAG tools

BSDL model: LM3S6100

	--//*****************************************************************************
--//
--// lm3s6100_ra2_bga_v1p1.bsdl - Boundary Scan Description Language (BSDL) file
--//                for the Texas Instruments LM3S6100 Stellaris microcontroller.
--//
--// Version 1.0    - 02/19/2010 - Initial Release of BSDL entity
--//                - LM3S6100, Revision A2, 108-ball BGA
--//
--// Version 1.1    - 07/14/2010 - Added MDIO to the Boundary Scan Chain
--//
--//
--// Copyright (c) 2010 Texas Instruments, Inc.  All rights reserved.
--//
--// Software License Agreement
--//
--// Texas Instruments, Inc. (TI) is supplying this software for use solely and
--// exclusively on TI's Stellaris Family of microcontroller products.
--//
--// The software is owned by TI and/or its suppliers, and is protected under
--// applicable copyright laws.  All rights are reserved.  Any use in violation
--// of the foregoing restrictions may subject the user to criminal sanctions
--// under applicable laws, as well as to civil liability for the breach of the
--// terms and conditions of this license.
--//
--// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
--// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
--// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
--// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
--// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
--//
--//*****************************************************************************


entity LM3S6100 is generic (PHYSICAL_PIN_MAP : string := "BGA_108");


port  ( CMOD0:          in      bit;
        CMOD1:          in      bit;
        ERBIAS:         linkage bit;
        GND:            linkage bit_vector(0 to 12);
        GNDA:           linkage bit_vector(0 to 1);
        GNDPHY:         linkage bit_vector(0 to 2);
        LDO:            linkage bit;
        MDIO:           inout   bit;
        NC:             linkage bit_vector(0 to 27);
        OSC0:           linkage bit;
        OSC1:           linkage bit;
        PA0_U0Rx:       inout   bit;
        PA1_U0Tx:       inout   bit;
        PA2_SSI0Clk:    inout   bit;
        PA3_SSI0Fss:    inout   bit;
        PA4_SSI0Rx:     inout   bit;
        PA5_SSI0Tx:     inout   bit;
        PA6_CCP1:       inout   bit;
        PB0_CCP0:       inout   bit;
        PB1_CCP2:       inout   bit;
        PB2:            inout   bit;
        PB3:            inout   bit;
        PB4:            inout   bit;
        PB5_C0o:        inout   bit;
        PB6:            inout   bit;
        PC4:            inout   bit;
        PC5:            inout   bit;
        PC6_CCP3:       inout   bit;
        PD0:            inout   bit;
        PD1:            inout   bit;
        PD2:            inout   bit;
        PD3:            inout   bit;
        PF0:            inout   bit;
        PF1:            inout   bit;
        PF2_LED1:       inout   bit;
        PF3_LED0:       inout   bit;
        RST:            in      bit;
        RXIN:           linkage bit;
        RXIP:           linkage bit;
        TCK:            in      bit;
        TDI:            in      bit;
        TDO:            out     bit;
        TMS:            in      bit;
        TRST:           in      bit;
        TXON:           linkage bit;
        TXOP:           linkage bit;
        VCCPHY:         linkage bit_vector(0 to 2);
        VDD:            linkage bit;
        VDD25:          linkage bit_vector(0 to 3);
        VDD33:          linkage bit_vector(0 to 7);
        VDDA:           linkage bit_vector(0 to 1);
        XTALNPHY:       linkage bit;
        XTALPPHY:       linkage bit
);


    use STD_1149_1_1994.all;   -- Get Std 1149.1-1994 attributes and definitions


    attribute COMPONENT_CONFORMANCE of LM3S6100 : entity is "STD_1149_1_1993";


    attribute PIN_MAP               of LM3S6100 : entity is PHYSICAL_PIN_MAP;


    constant BGA_108: PIN_MAP_STRING := 
        "PB4:             A6, " &
        "PB6:             A7, " &
        "TRST:            A8, " &
        "TCK:             A9, " &
        "TDO:            A10, " &
        "PB5_C0o:         B7, " &
        "TDI:             B8, " &
        "TMS:             B9, " &
        "CMOD1:          B10, " &
        "PB2:            C11, " &
        "PB3:            C12, " &
        "PB1_CCP2:       D12, " &
        "LDO:             E3, " &
        "CMOD0:          E11, " &
        "PB0_CCP0:       E12, " &
        "PD0:             G1, " &
        "PD1:             G2, " &
        "PD3:             H1, " &
        "PD2:             H2, " &
        "RST:            H11, " &
        "PF1:            H12, " &
        "XTALNPHY:        J1, " &
        "XTALPPHY:        J2, " &
        "PF2_LED1:       J11, " &
        "PF3_LED0:       J12, " &
        "ERBIAS:          K3, " &
        "PC4:             L1, " &
        "PA0_U0Rx:        L3, " &
        "PA3_SSI0Fss:     L4, " &
        "PA4_SSI0Rx:      L5, " &
        "PA6_CCP1:        L6, " &
        "RXIN:            L7, " &
        "TXON:            L8, " &
        "MDIO:            L9, " &
        "OSC0:           L11, " &
        "VDD:            L12, " &
        "PC5:             M1, " &
        "PC6_CCP3:        M2, " &
        "PA1_U0Tx:        M3, " &
        "PA2_SSI0Clk:     M4, " &
        "PA5_SSI0Tx:      M5, " &
        "RXIP:            M7, " &
        "TXOP:            M8, " &
        "PF0:             M9, " &
        "OSC1:           M11, " &
        "GND:           ( B6,  C4,  C5, F10, F11, F12,  H3,  J3, J10,  K5,  K6, K10, L10 ), " &
        "GNDA:          ( A5,  B5 ), " &
        "GNDPHY:        ( C8,  C9,  K4 ), " &
        "NC:            ( A1,  A2,  A3,  A4, A11, A12,  B1,  B2,  B3,  B4, B11, B12,  C1,  C2,  D1,  D2,  E1,  E2,  F1,  F2,  K1,  K2, K11, K12,  L2,  M6, M10, M12 ), " &
        "VCCPHY:        (C10, D10, D11 ), " &
        "VDD25:         ( C3,  D3,  F3,  G3 ), " &
        "VDD33:         (E10, G10, G11, G12, H10,  K7,  K8,  K9 ), " &
        "VDDA:          ( C6,  C7 ) " ;


    attribute TAP_SCAN_RESET of TRST  : signal is true;
    attribute TAP_SCAN_CLOCK of TCK   : signal is (10.0e6, BOTH);
    attribute TAP_SCAN_MODE  of TMS   : signal is true;
    attribute TAP_SCAN_IN    of TDI   : signal is true;
    attribute TAP_SCAN_OUT   of TDO   : signal is true; 


    attribute INSTRUCTION_LENGTH of LM3S6100 : entity is 4;


    attribute INSTRUCTION_OPCODE of LM3S6100 : entity is 
        "EXTEST (0000),"  &
        "INTEST (0001),"  &
        "SAMPLE (0010),"  &
        "BYPASS (0011),"  &
        "BYPASS (0100),"  &
        "BYPASS (0101),"  &
        "BYPASS (0110),"  &
        "BYPASS (0111),"  &
        "ABORT  (1000),"  &
        "BYPASS (1001),"  &
        "DPACC  (1010),"  &
        "APACC  (1011),"  &
        "BYPASS (1100),"  &
        "BYPASS (1101),"  &
        "IDCODE (1110),"  &
        "BYPASS (1111)";


    attribute INSTRUCTION_CAPTURE of LM3S6100 : entity is "0001";


    attribute IDCODE_REGISTER     of LM3S6100 : entity is
        "0011" &                    -- Version (Fourth Revision)
        "1011101000000000" &        -- Part number (ARM Cortex M3)
        "01000111011" &             -- Manufacturer Identity (ARM)
        "1";                        -- Mandatory LSB
                                    -- IDCODE = 3BA00477


    attribute INSTRUCTION_PRIVATE of LM3S6100 : entity is
        "ABORT, DPACC, APACC";      -- ARM Debug Access Port Instructions


    attribute BOUNDARY_LENGTH     of LM3S6100 : entity is 81;


    attribute BOUNDARY_REGISTER   of LM3S6100 : entity is 
        --  num   cell  port            function  safe  [ ccell  disval  rslt ]
        --  ---   ----  --------------  --------  ----    ------ ------ ------ 
        "     0  (BC_4, CMOD1,          CLOCK,     X ),                         " &
        "     1  (BC_1, *,              CONTROL,   1 ),                         " &
        "     2  (BC_1, PB3,            OUTPUT3,   X  ,      1,     1,     Z ), " &
        "     3  (BC_1, PB3,            INPUT,     X ),                         " &
        "     4  (BC_1, *,              CONTROL,   1 ),                         " &
        "     5  (BC_1, PB2,            OUTPUT3,   X  ,      4,     1,     Z ), " &
        "     6  (BC_1, PB2,            INPUT,     X ),                         " &
        "     7  (BC_1, *,              CONTROL,   1 ),                         " &
        "     8  (BC_1, PB1_CCP2,       OUTPUT3,   X  ,      7,     1,     Z ), " &
        "     9  (BC_1, PB1_CCP2,       INPUT,     X ),                         " &
        "    10  (BC_1, *,              CONTROL,   1 ),                         " &
        "    11  (BC_1, PB0_CCP0,       OUTPUT3,   X  ,     10,     1,     Z ), " &
        "    12  (BC_1, PB0_CCP0,       INPUT,     X ),                         " &
        "    13  (BC_4, CMOD0,          CLOCK,     X ),                         " &
        "    14  (BC_4, RST,            CLOCK,     X ),                         " &
        "    15  (BC_1, *,              CONTROL,   1 ),                         " &
        "    16  (BC_1, PF1,            OUTPUT3,   X  ,     15,     1,     Z ), " &
        "    17  (BC_1, PF1,            INPUT,     X ),                         " &
        "    18  (BC_1, *,              CONTROL,   1 ),                         " &
        "    19  (BC_1, PF2_LED1,       OUTPUT3,   X  ,     18,     1,     Z ), " &
        "    20  (BC_1, PF2_LED1,       INPUT,     X ),                         " &
        "    21  (BC_1, *,              CONTROL,   1 ),                         " &
        "    22  (BC_1, PF3_LED0,       OUTPUT3,   X  ,     21,     1,     Z ), " &
        "    23  (BC_1, PF3_LED0,       INPUT,     X ),                         " &
        "    24  (BC_1, *,              CONTROL,   1 ),                         " &
        "    25  (BC_1, MDIO,           OUTPUT3,   X  ,     24,     1,     Z ), " &
        "    26  (BC_1, MDIO,           INPUT,     X ),                         " &
        "    27  (BC_1, *,              CONTROL,   1 ),                         " &
        "    28  (BC_1, PF0,            OUTPUT3,   X  ,     27,     1,     Z ), " &
        "    29  (BC_1, PF0,            INPUT,     X ),                         " &
        "    30  (BC_1, *,              CONTROL,   1 ),                         " &
        "    31  (BC_1, PA6_CCP1,       OUTPUT3,   X  ,     30,     1,     Z ), " &
        "    32  (BC_1, PA6_CCP1,       INPUT,     X ),                         " &
        "    33  (BC_1, *,              CONTROL,   1 ),                         " &
        "    34  (BC_1, PA5_SSI0Tx,     OUTPUT3,   X  ,     33,     1,     Z ), " &
        "    35  (BC_1, PA5_SSI0Tx,     INPUT,     X ),                         " &
        "    36  (BC_1, *,              CONTROL,   1 ),                         " &
        "    37  (BC_1, PA4_SSI0Rx,     OUTPUT3,   X  ,     36,     1,     Z ), " &
        "    38  (BC_1, PA4_SSI0Rx,     INPUT,     X ),                         " &
        "    39  (BC_1, *,              CONTROL,   1 ),                         " &
        "    40  (BC_1, PA3_SSI0Fss,    OUTPUT3,   X  ,     39,     1,     Z ), " &
        "    41  (BC_1, PA3_SSI0Fss,    INPUT,     X ),                         " &
        "    42  (BC_1, *,              CONTROL,   1 ),                         " &
        "    43  (BC_1, PA2_SSI0Clk,    OUTPUT3,   X  ,     42,     1,     Z ), " &
        "    44  (BC_1, PA2_SSI0Clk,    INPUT,     X ),                         " &
        "    45  (BC_1, *,              CONTROL,   1 ),                         " &
        "    46  (BC_1, PA1_U0Tx,       OUTPUT3,   X  ,     45,     1,     Z ), " &
        "    47  (BC_1, PA1_U0Tx,       INPUT,     X ),                         " &
        "    48  (BC_1, *,              CONTROL,   1 ),                         " &
        "    49  (BC_1, PA0_U0Rx,       OUTPUT3,   X  ,     48,     1,     Z ), " &
        "    50  (BC_1, PA0_U0Rx,       INPUT,     X ),                         " &
        "    51  (BC_1, *,              CONTROL,   1 ),                         " &
        "    52  (BC_1, PC4,            OUTPUT3,   X  ,     51,     1,     Z ), " &
        "    53  (BC_1, PC4,            INPUT,     X ),                         " &
        "    54  (BC_1, *,              CONTROL,   1 ),                         " &
        "    55  (BC_1, PC5,            OUTPUT3,   X  ,     54,     1,     Z ), " &
        "    56  (BC_1, PC5,            INPUT,     X ),                         " &
        "    57  (BC_1, *,              CONTROL,   1 ),                         " &
        "    58  (BC_1, PC6_CCP3,       OUTPUT3,   X  ,     57,     1,     Z ), " &
        "    59  (BC_1, PC6_CCP3,       INPUT,     X ),                         " &
        "    60  (BC_1, *,              CONTROL,   1 ),                         " &
        "    61  (BC_1, PD3,            OUTPUT3,   X  ,     60,     1,     Z ), " &
        "    62  (BC_1, PD3,            INPUT,     X ),                         " &
        "    63  (BC_1, *,              CONTROL,   1 ),                         " &
        "    64  (BC_1, PD2,            OUTPUT3,   X  ,     63,     1,     Z ), " &
        "    65  (BC_1, PD2,            INPUT,     X ),                         " &
        "    66  (BC_1, *,              CONTROL,   1 ),                         " &
        "    67  (BC_1, PD1,            OUTPUT3,   X  ,     66,     1,     Z ), " &
        "    68  (BC_1, PD1,            INPUT,     X ),                         " &
        "    69  (BC_1, *,              CONTROL,   1 ),                         " &
        "    70  (BC_1, PD0,            OUTPUT3,   X  ,     69,     1,     Z ), " &
        "    71  (BC_1, PD0,            INPUT,     X ),                         " &
        "    72  (BC_1, *,              CONTROL,   1 ),                         " &
        "    73  (BC_1, PB4,            OUTPUT3,   X  ,     72,     1,     Z ), " &
        "    74  (BC_1, PB4,            INPUT,     X ),                         " &
        "    75  (BC_1, *,              CONTROL,   1 ),                         " &
        "    76  (BC_1, PB5_C0o,        OUTPUT3,   X  ,     75,     1,     Z ), " &
        "    77  (BC_1, PB5_C0o,        INPUT,     X ),                         " &
        "    78  (BC_1, *,              CONTROL,   1 ),                         " &
        "    79  (BC_1, PB6,            OUTPUT3,   X  ,     78,     1,     Z ), " &
        "    80  (BC_1, PB6,            INPUT,     X )                          " ;


end LM3S6100;