-- Copyright (C) 1998-2007 Altera Corporation
--
-- File Name : EPM570T100.BSD
-- Device : EPM570T100
-- Package : 100-Pin Thin Quad Flat Pack
-- BSDL Version : 1.3
-- BSDL Status : Final
-- Date Created : 06/26/2007
-- Created by : Altera BSDL Generation Program Ver. 1.23
-- Verification : Software syntax checked & hardware tested on:
-- JTAG Technologies PLDProg Manager ver. 3.2
--
-- Documentation : MAX II Family Datasheet
-- MAX II Handbook Chapter: IEEE 1149.1 (JTAG)
-- Boundary Scan Testing in MAX II Devices
--
-- *********************************************************************
-- * IMPORTANT NOTICE *
-- *********************************************************************
--
-- Altera, MAX II and EPM570 are trademarks of Altera
-- Corporation. Altera products, marketed under trademarks, are
-- protected under numerous US and foreign patents and pending
-- applications, maskwork rights, and copyrights. Altera warrants
-- performance of its semiconductor products to current specifications
-- in accordance with Altera's standard warranty, but reserves the
-- right to make changes to any products and services at any time
-- without notice. Altera assumes no responsibility or liability
-- arising out of the application or use of any information, product,
-- or service described herein except as expressly agreed to in
-- writing by Altera Corporation. Altera customers are advised to
-- obtain the latest version of device specifications before relying
-- on any published information and before placing orders for products
-- or services.
--
-- **Testing After Configuration**
-- This file supports boundary scan testing (BST) before device
-- configuration. After configuration, you should use the
-- BSDLCustomizer tool available at
-- www.altera.com/support/devices/bsdl/bsdl.html
-- to create a post-configuration BSDL file that is customized to
-- your design.
-- *********************************************************************
-- * ENTITY DEFINITION WITH PORTS *
-- *********************************************************************
entity EPM570T100 is
generic (PHYSICAL_PIN_MAP : string := "TQFP100");
port (
--I/O Pins
IO2 , IO3 , IO4 , IO5 , IO6 , IO7 , IO8 ,
IO12 , IO14 , IO15 , IO16 , IO17 , IO18 , IO19 ,
IO20 , IO21 , IO26 , IO27 , IO28 , IO29 , IO30 ,
IO33 , IO34 , IO35 , IO36 , IO38 , IO40 , IO41 ,
IO42 , IO43 , IO44 , IO47 , IO48 , IO49 , IO50 ,
IO51 , IO52 , IO53 , IO54 , IO55 , IO56 , IO57 ,
IO58 , IO61 , IO62 , IO64 , IO66 , IO67 , IO68 ,
IO69 , IO70 , IO71 , IO72 , IO73 , IO74 , IO75 ,
IO76 , IO77 , IO78 , IO81 , IO82 , IO83 , IO84 ,
IO85 , IO86 , IO87 , IO89 , IO91 , IO92 , IO95 ,
IO96 , IO97 , IO98 , IO99 , IO100 , IO1 : inout bit;
--JTAG Ports
TCK , TMS , TDI : in bit;
TDO : out bit;
--Power Pins
VCC : linkage bit_vector (1 to 10);
--Ground Pins
GND : linkage bit_vector (1 to 10)
);
use STD_1149_1_2001.all;
use STD_1532_2001.all;
attribute COMPONENT_CONFORMANCE of EPM570T100 :
entity is "STD_1149_1_2001";
-- *********************************************************************
-- * PIN MAPPING *
-- *********************************************************************
attribute PIN_MAP of EPM570T100 : entity is PHYSICAL_PIN_MAP;
constant TQFP100 : PIN_MAP_STRING :=
--I/O Pins
"IO2 : 2 , IO3 : 3 , IO4 : 4 , IO5 : 5 , "&
"IO6 : 6 , IO7 : 7 , IO8 : 8 , IO12 : 12 , "&
"IO14 : 14 , IO15 : 15 , IO16 : 16 , IO17 : 17 , "&
"IO18 : 18 , IO19 : 19 , IO20 : 20 , IO21 : 21 , "&
"IO26 : 26 , IO27 : 27 , IO28 : 28 , IO29 : 29 , "&
"IO30 : 30 , IO33 : 33 , IO34 : 34 , IO35 : 35 , "&
"IO36 : 36 , IO38 : 38 , IO40 : 40 , IO41 : 41 , "&
"IO42 : 42 , IO43 : 43 , IO44 : 44 , IO47 : 47 , "&
"IO48 : 48 , IO49 : 49 , IO50 : 50 , IO51 : 51 , "&
"IO52 : 52 , IO53 : 53 , IO54 : 54 , IO55 : 55 , "&
"IO56 : 56 , IO57 : 57 , IO58 : 58 , IO61 : 61 , "&
"IO62 : 62 , IO64 : 64 , IO66 : 66 , IO67 : 67 , "&
"IO68 : 68 , IO69 : 69 , IO70 : 70 , IO71 : 71 , "&
"IO72 : 72 , IO73 : 73 , IO74 : 74 , IO75 : 75 , "&
"IO76 : 76 , IO77 : 77 , IO78 : 78 , IO81 : 81 , "&
"IO82 : 82 , IO83 : 83 , IO84 : 84 , IO85 : 85 , "&
"IO86 : 86 , IO87 : 87 , IO89 : 89 , IO91 : 91 , "&
"IO92 : 92 , IO95 : 95 , IO96 : 96 , IO97 : 97 , "&
"IO98 : 98 , IO99 : 99 , IO100 : 100 , IO1 : 1 , "&
--JTAG ports
"TCK : 24 , TMS : 22 , TDI : 23 , TDO : 25 , "&
--Power Pins
"VCC : (9 , 13 , 31 , 39 , 45 , 59 , 63 , 80 , "&
"88 , 94 ), "&
--Ground Pins
"GND : (10 , 11 , 32 , 37 , 46 , 60 , 65 , 79 , "&
"90 , 93 )";
-- *********************************************************************
-- * IEEE 1149.1 TAP PORTS *
-- *********************************************************************
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (10.00e6,BOTH);
-- *********************************************************************
-- * INSTRUCTIONS AND REGISTER ACCESS *
-- *********************************************************************
attribute INSTRUCTION_LENGTH of EPM570T100 : entity is 10;
attribute INSTRUCTION_OPCODE of EPM570T100 : entity is
"BYPASS (1111111111), "&
"EXTEST (0000001111), "&
"SAMPLE (0000000101), "&
"PRELOAD (0000000101), "&
"IDCODE (0000000110), "&
"USERCODE (0000000111), "&
"CLAMP (0000001010), "&
"HIGHZ (0000001011), "&
-- Following 7 instructions are IEEE 1532 instructions
"ISC_ENABLE (1011001100), "&
"ISC_DISABLE (1000000001), "&
"ISC_PROGRAM (1011110100), "&
"ISC_ERASE (1011110010), "&
"ISC_ADDRESS_SHIFT (1000000011), "&
"ISC_READ (1000000101), "&
"ISC_NOOP (1000010000)";
attribute INSTRUCTION_CAPTURE of EPM570T100 : entity is "0101010X01";
attribute IDCODE_REGISTER of EPM570T100 : entity is
"0000"& --4-bit Version
"0010000010100010"& --16-bit Part Number (hex 20A2)
"00001101110"& --11-bit Manufacturer's Identity
"1"; --Mandatory LSB
attribute USERCODE_REGISTER of EPM570T100 : entity is
"XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"; --All 32 bits are programmable
attribute REGISTER_ACCESS of EPM570T100 : entity is
"DEVICE_ID (IDCODE)," &
-- Following 3 registers are IEEE 1532 registers
"ISC_Default[1] (ISC_ENABLE, ISC_DISABLE, ISC_NOOP, ISC_ERASE)," &
"ISC_PData[16] (ISC_PROGRAM, ISC_READ)," &
"ISC_Address[14] (ISC_ADDRESS_SHIFT)";
-- *********************************************************************
-- * BOUNDARY SCAN CELL INFORMATION *
-- *********************************************************************
attribute BOUNDARY_LENGTH of EPM570T100 : entity is 480;
attribute BOUNDARY_REGISTER of EPM570T100 : entity is
--BSC group 0 for unused pad
"0 (BC_4, *, internal, X)," &
"1 (BC_4, *, internal, 1)," &
"2 (BC_4, *, internal, X)," &
--BSC group 1 for unused pad
"3 (BC_4, *, internal, X)," &
"4 (BC_4, *, internal, 1)," &
"5 (BC_4, *, internal, X)," &
--BSC group 2 for I/O pin 44
"6 (BC_4, IO44, input, X)," &
"7 (BC_1, *, control, 1)," &
"8 (BC_1, IO44, output3, X, 7, 1, Z)," &
--BSC group 3 for I/O pin 43
"9 (BC_4, IO43, input, X)," &
"10 (BC_1, *, control, 1)," &
"11 (BC_1, IO43, output3, X, 10, 1, Z)," &
--BSC group 4 for I/O pin 42
"12 (BC_4, IO42, input, X)," &
"13 (BC_1, *, control, 1)," &
"14 (BC_1, IO42, output3, X, 13, 1, Z)," &
--BSC group 5 for I/O pin 41
"15 (BC_4, IO41, input, X)," &
"16 (BC_1, *, control, 1)," &
"17 (BC_1, IO41, output3, X, 16, 1, Z)," &
--BSC group 6 for I/O pin 40
"18 (BC_4, IO40, input, X)," &
"19 (BC_1, *, control, 1)," &
"20 (BC_1, IO40, output3, X, 19, 1, Z)," &
--BSC group 7 for I/O pin 38
"21 (BC_4, IO38, input, X)," &
"22 (BC_1, *, control, 1)," &
"23 (BC_1, IO38, output3, X, 22, 1, Z)," &
--BSC group 8 for I/O pin 36
"24 (BC_4, IO36, input, X)," &
"25 (BC_1, *, control, 1)," &
"26 (BC_1, IO36, output3, X, 25, 1, Z)," &
--BSC group 9 for I/O pin 35
"27 (BC_4, IO35, input, X)," &
"28 (BC_1, *, control, 1)," &
"29 (BC_1, IO35, output3, X, 28, 1, Z)," &
--BSC group 10 for I/O pin 34
"30 (BC_4, IO34, input, X)," &
"31 (BC_1, *, control, 1)," &
"32 (BC_1, IO34, output3, X, 31, 1, Z)," &
--BSC group 11 for I/O pin 33
"33 (BC_4, IO33, input, X)," &
"34 (BC_1, *, control, 1)," &
"35 (BC_1, IO33, output3, X, 34, 1, Z)," &
--BSC group 12 for unused pad
"36 (BC_4, *, internal, X)," &
"37 (BC_4, *, internal, 1)," &
"38 (BC_4, *, internal, X)," &
--BSC group 13 for unused pad
"39 (BC_4, *, internal, X)," &
"40 (BC_4, *, internal, 1)," &
"41 (BC_4, *, internal, X)," &
--BSC group 14 for unused pad
"42 (BC_4, *, internal, X)," &
"43 (BC_4, *, internal, 1)," &
"44 (BC_4, *, internal, X)," &
--BSC group 15 for unused pad
"45 (BC_4, *, internal, X)," &
"46 (BC_4, *, internal, 1)," &
"47 (BC_4, *, internal, X)," &
--BSC group 16 for unused pad
"48 (BC_4, *, internal, X)," &
"49 (BC_4, *, internal, 1)," &
"50 (BC_4, *, internal, X)," &
--BSC group 17 for I/O pin 30
"51 (BC_4, IO30, input, X)," &
"52 (BC_1, *, control, 1)," &
"53 (BC_1, IO30, output3, X, 52, 1, Z)," &
--BSC group 18 for I/O pin 29
"54 (BC_4, IO29, input, X)," &
"55 (BC_1, *, control, 1)," &
"56 (BC_1, IO29, output3, X, 55, 1, Z)," &
--BSC group 19 for I/O pin 28
"57 (BC_4, IO28, input, X)," &
"58 (BC_1, *, control, 1)," &
"59 (BC_1, IO28, output3, X, 58, 1, Z)," &
--BSC group 20 for unused pad
"60 (BC_4, *, internal, X)," &
"61 (BC_4, *, internal, 1)," &
"62 (BC_4, *, internal, X)," &
--BSC group 21 for I/O pin 27
"63 (BC_4, IO27, input, X)," &
"64 (BC_1, *, control, 1)," &
"65 (BC_1, IO27, output3, X, 64, 1, Z)," &
--BSC group 22 for I/O pin 26
"66 (BC_4, IO26, input, X)," &
"67 (BC_1, *, control, 1)," &
"68 (BC_1, IO26, output3, X, 67, 1, Z)," &
--BSC group 23 for unused pad
"69 (BC_4, *, internal, X)," &
"70 (BC_4, *, internal, 1)," &
"71 (BC_4, *, internal, X)," &
--BSC group 24 for unused pad
"72 (BC_4, *, internal, X)," &
"73 (BC_4, *, internal, 1)," &
"74 (BC_4, *, internal, X)," &
--BSC group 25 for unused pad
"75 (BC_4, *, internal, X)," &
"76 (BC_4, *, internal, 1)," &
"77 (BC_4, *, internal, X)," &
--BSC group 26 for unused pad
"78 (BC_4, *, internal, X)," &
"79 (BC_4, *, internal, 1)," &
"80 (BC_4, *, internal, X)," &
--BSC group 27 for unused pad
"81 (BC_4, *, internal, X)," &
"82 (BC_4, *, internal, 1)," &
"83 (BC_4, *, internal, X)," &
--BSC group 28 for unused pad
"84 (BC_4, *, internal, X)," &
"85 (BC_4, *, internal, 1)," &
"86 (BC_4, *, internal, X)," &
--BSC group 29 for I/O pin 21
"87 (BC_4, IO21, input, X)," &
"88 (BC_1, *, control, 1)," &
"89 (BC_1, IO21, output3, X, 88, 1, Z)," &
--BSC group 30 for unused pad
"90 (BC_4, *, internal, X)," &
"91 (BC_4, *, internal, 1)," &
"92 (BC_4, *, internal, X)," &
--BSC group 31 for I/O pin 20
"93 (BC_4, IO20, input, X)," &
"94 (BC_1, *, control, 1)," &
"95 (BC_1, IO20, output3, X, 94, 1, Z)," &
--BSC group 32 for unused pad
"96 (BC_4, *, internal, X)," &
"97 (BC_4, *, internal, 1)," &
"98 (BC_4, *, internal, X)," &
--BSC group 33 for I/O pin 19
"99 (BC_4, IO19, input, X)," &
"100 (BC_1, *, control, 1)," &
"101 (BC_1, IO19, output3, X, 100, 1, Z)," &
--BSC group 34 for unused pad
"102 (BC_4, *, internal, X)," &
"103 (BC_4, *, internal, 1)," &
"104 (BC_4, *, internal, X)," &
--BSC group 35 for unused pad
"105 (BC_4, *, internal, X)," &
"106 (BC_4, *, internal, 1)," &
"107 (BC_4, *, internal, X)," &
--BSC group 36 for unused pad
"108 (BC_4, *, internal, X)," &
"109 (BC_4, *, internal, 1)," &
"110 (BC_4, *, internal, X)," &
--BSC group 37 for unused pad
"111 (BC_4, *, internal, X)," &
"112 (BC_4, *, internal, 1)," &
"113 (BC_4, *, internal, X)," &
--BSC group 38 for unused pad
"114 (BC_4, *, internal, X)," &
"115 (BC_4, *, internal, 1)," &
"116 (BC_4, *, internal, X)," &
--BSC group 39 for unused pad
"117 (BC_4, *, internal, X)," &
"118 (BC_4, *, internal, 1)," &
"119 (BC_4, *, internal, X)," &
--BSC group 40 for I/O pin 18
"120 (BC_4, IO18, input, X)," &
"121 (BC_1, *, control, 1)," &
"122 (BC_1, IO18, output3, X, 121, 1, Z)," &
--BSC group 41 for I/O pin 17
"123 (BC_4, IO17, input, X)," &
"124 (BC_1, *, control, 1)," &
"125 (BC_1, IO17, output3, X, 124, 1, Z)," &
--BSC group 42 for I/O pin 16
"126 (BC_4, IO16, input, X)," &
"127 (BC_1, *, control, 1)," &
"128 (BC_1, IO16, output3, X, 127, 1, Z)," &
--BSC group 43 for I/O pin 15
"129 (BC_4, IO15, input, X)," &
"130 (BC_1, *, control, 1)," &
"131 (BC_1, IO15, output3, X, 130, 1, Z)," &
--BSC group 44 for I/O pin 14
"132 (BC_4, IO14, input, X)," &
"133 (BC_1, *, control, 1)," &
"134 (BC_1, IO14, output3, X, 133, 1, Z)," &
--BSC group 45 for I/O pin 12
"135 (BC_4, IO12, input, X)," &
"136 (BC_1, *, control, 1)," &
"137 (BC_1, IO12, output3, X, 136, 1, Z)," &
--BSC group 46 for unused pad
"138 (BC_4, *, internal, X)," &
"139 (BC_4, *, internal, 1)," &
"140 (BC_4, *, internal, X)," &
--BSC group 47 for unused pad
"141 (BC_4, *, internal, X)," &
"142 (BC_4, *, internal, 1)," &
"143 (BC_4, *, internal, X)," &
--BSC group 48 for unused pad
"144 (BC_4, *, internal, X)," &
"145 (BC_4, *, internal, 1)," &
"146 (BC_4, *, internal, X)," &
--BSC group 49 for unused pad
"147 (BC_4, *, internal, X)," &
"148 (BC_4, *, internal, 1)," &
"149 (BC_4, *, internal, X)," &
--BSC group 50 for unused pad
"150 (BC_4, *, internal, X)," &
"151 (BC_4, *, internal, 1)," &
"152 (BC_4, *, internal, X)," &
--BSC group 51 for unused pad
"153 (BC_4, *, internal, X)," &
"154 (BC_4, *, internal, 1)," &
"155 (BC_4, *, internal, X)," &
--BSC group 52 for unused pad
"156 (BC_4, *, internal, X)," &
"157 (BC_4, *, internal, 1)," &
"158 (BC_4, *, internal, X)," &
--BSC group 53 for unused pad
"159 (BC_4, *, internal, X)," &
"160 (BC_4, *, internal, 1)," &
"161 (BC_4, *, internal, X)," &
--BSC group 54 for I/O pin 8
"162 (BC_4, IO8, input, X)," &
"163 (BC_1, *, control, 1)," &
"164 (BC_1, IO8, output3, X, 163, 1, Z)," &
--BSC group 55 for I/O pin 7
"165 (BC_4, IO7, input, X)," &
"166 (BC_1, *, control, 1)," &
"167 (BC_1, IO7, output3, X, 166, 1, Z)," &
--BSC group 56 for I/O pin 6
"168 (BC_4, IO6, input, X)," &
"169 (BC_1, *, control, 1)," &
"170 (BC_1, IO6, output3, X, 169, 1, Z)," &
--BSC group 57 for I/O pin 5
"171 (BC_4, IO5, input, X)," &
"172 (BC_1, *, control, 1)," &
"173 (BC_1, IO5, output3, X, 172, 1, Z)," &
--BSC group 58 for unused pad
"174 (BC_4, *, internal, X)," &
"175 (BC_4, *, internal, 1)," &
"176 (BC_4, *, internal, X)," &
--BSC group 59 for I/O pin 4
"177 (BC_4, IO4, input, X)," &
"178 (BC_1, *, control, 1)," &
"179 (BC_1, IO4, output3, X, 178, 1, Z)," &
--BSC group 60 for unused pad
"180 (BC_4, *, internal, X)," &
"181 (BC_4, *, internal, 1)," &
"182 (BC_4, *, internal, X)," &
--BSC group 61 for I/O pin 3
"183 (BC_4, IO3, input, X)," &
"184 (BC_1, *, control, 1)," &
"185 (BC_1, IO3, output3, X, 184, 1, Z)," &
--BSC group 62 for unused pad
"186 (BC_4, *, internal, X)," &
"187 (BC_4, *, internal, 1)," &
"188 (BC_4, *, internal, X)," &
--BSC group 63 for I/O pin 2
"189 (BC_4, IO2, input, X)," &
"190 (BC_1, *, control, 1)," &
"191 (BC_1, IO2, output3, X, 190, 1, Z)," &
--BSC group 64 for unused pad
"192 (BC_4, *, internal, X)," &
"193 (BC_4, *, internal, 1)," &
"194 (BC_4, *, internal, X)," &
--BSC group 65 for unused pad
"195 (BC_4, *, internal, X)," &
"196 (BC_4, *, internal, 1)," &
"197 (BC_4, *, internal, X)," &
--BSC group 66 for unused pad
"198 (BC_4, *, internal, X)," &
"199 (BC_4, *, internal, 1)," &
"200 (BC_4, *, internal, X)," &
--BSC group 67 for unused pad
"201 (BC_4, *, internal, X)," &
"202 (BC_4, *, internal, 1)," &
"203 (BC_4, *, internal, X)," &
--BSC group 68 for I/O pin 1
"204 (BC_4, IO1, input, X)," &
"205 (BC_1, *, control, 1)," &
"206 (BC_1, IO1, output3, X, 205, 1, Z)," &
--BSC group 69 for unused pad
"207 (BC_4, *, internal, X)," &
"208 (BC_4, *, internal, 1)," &
"209 (BC_4, *, internal, X)," &
--BSC group 70 for unused pad
"210 (BC_4, *, internal, X)," &
"211 (BC_4, *, internal, 1)," &
"212 (BC_4, *, internal, X)," &
--BSC group 71 for I/O pin 100
"213 (BC_4, IO100, input, X)," &
"214 (BC_1, *, control, 1)," &
"215 (BC_1, IO100, output3, X, 214, 1, Z)," &
--BSC group 72 for unused pad
"216 (BC_4, *, internal, X)," &
"217 (BC_4, *, internal, 1)," &
"218 (BC_4, *, internal, X)," &
--BSC group 73 for I/O pin 99
"219 (BC_4, IO99, input, X)," &
"220 (BC_1, *, control, 1)," &
"221 (BC_1, IO99, output3, X, 220, 1, Z)," &
--BSC group 74 for I/O pin 98
"222 (BC_4, IO98, input, X)," &
"223 (BC_1, *, control, 1)," &
"224 (BC_1, IO98, output3, X, 223, 1, Z)," &
--BSC group 75 for unused pad
"225 (BC_4, *, internal, X)," &
"226 (BC_4, *, internal, 1)," &
"227 (BC_4, *, internal, X)," &
--BSC group 76 for I/O pin 97
"228 (BC_4, IO97, input, X)," &
"229 (BC_1, *, control, 1)," &
"230 (BC_1, IO97, output3, X, 229, 1, Z)," &
--BSC group 77 for I/O pin 96
"231 (BC_4, IO96, input, X)," &
"232 (BC_1, *, control, 1)," &
"233 (BC_1, IO96, output3, X, 232, 1, Z)," &
--BSC group 78 for I/O pin 95
"234 (BC_4, IO95, input, X)," &
"235 (BC_1, *, control, 1)," &
"236 (BC_1, IO95, output3, X, 235, 1, Z)," &
--BSC group 79 for I/O pin 92
"237 (BC_4, IO92, input, X)," &
"238 (BC_1, *, control, 1)," &
"239 (BC_1, IO92, output3, X, 238, 1, Z)," &
--BSC group 80 for I/O pin 91
"240 (BC_4, IO91, input, X)," &
"241 (BC_1, *, control, 1)," &
"242 (BC_1, IO91, output3, X, 241, 1, Z)," &
--BSC group 81 for unused pad
"243 (BC_4, *, internal, X)," &
"244 (BC_4, *, internal, 1)," &
"245 (BC_4, *, internal, X)," &
--BSC group 82 for unused pad
"246 (BC_4, *, internal, X)," &
"247 (BC_4, *, internal, 1)," &
"248 (BC_4, *, internal, X)," &
--BSC group 83 for unused pad
"249 (BC_4, *, internal, X)," &
"250 (BC_4, *, internal, 1)," &
"251 (BC_4, *, internal, X)," &
--BSC group 84 for unused pad
"252 (BC_4, *, internal, X)," &
"253 (BC_4, *, internal, 1)," &
"254 (BC_4, *, internal, X)," &
--BSC group 85 for I/O pin 89
"255 (BC_4, IO89, input, X)," &
"256 (BC_1, *, control, 1)," &
"257 (BC_1, IO89, output3, X, 256, 1, Z)," &
--BSC group 86 for I/O pin 87
"258 (BC_4, IO87, input, X)," &
"259 (BC_1, *, control, 1)," &
"260 (BC_1, IO87, output3, X, 259, 1, Z)," &
--BSC group 87 for I/O pin 86
"261 (BC_4, IO86, input, X)," &
"262 (BC_1, *, control, 1)," &
"263 (BC_1, IO86, output3, X, 262, 1, Z)," &
--BSC group 88 for I/O pin 85
"264 (BC_4, IO85, input, X)," &
"265 (BC_1, *, control, 1)," &
"266 (BC_1, IO85, output3, X, 265, 1, Z)," &
--BSC group 89 for I/O pin 84
"267 (BC_4, IO84, input, X)," &
"268 (BC_1, *, control, 1)," &
"269 (BC_1, IO84, output3, X, 268, 1, Z)," &
--BSC group 90 for I/O pin 83
"270 (BC_4, IO83, input, X)," &
"271 (BC_1, *, control, 1)," &
"272 (BC_1, IO83, output3, X, 271, 1, Z)," &
--BSC group 91 for unused pad
"273 (BC_4, *, internal, X)," &
"274 (BC_4, *, internal, 1)," &
"275 (BC_4, *, internal, X)," &
--BSC group 92 for unused pad
"276 (BC_4, *, internal, X)," &
"277 (BC_4, *, internal, 1)," &
"278 (BC_4, *, internal, X)," &
--BSC group 93 for I/O pin 82
"279 (BC_4, IO82, input, X)," &
"280 (BC_1, *, control, 1)," &
"281 (BC_1, IO82, output3, X, 280, 1, Z)," &
--BSC group 94 for I/O pin 81
"282 (BC_4, IO81, input, X)," &
"283 (BC_1, *, control, 1)," &
"284 (BC_1, IO81, output3, X, 283, 1, Z)," &
--BSC group 95 for unused pad
"285 (BC_4, *, internal, X)," &
"286 (BC_4, *, internal, 1)," &
"287 (BC_4, *, internal, X)," &
--BSC group 96 for unused pad
"288 (BC_4, *, internal, X)," &
"289 (BC_4, *, internal, 1)," &
"290 (BC_4, *, internal, X)," &
--BSC group 97 for unused pad
"291 (BC_4, *, internal, X)," &
"292 (BC_4, *, internal, 1)," &
"293 (BC_4, *, internal, X)," &
--BSC group 98 for unused pad
"294 (BC_4, *, internal, X)," &
"295 (BC_4, *, internal, 1)," &
"296 (BC_4, *, internal, X)," &
--BSC group 99 for unused pad
"297 (BC_4, *, internal, X)," &
"298 (BC_4, *, internal, 1)," &
"299 (BC_4, *, internal, X)," &
--BSC group 100 for unused pad
"300 (BC_4, *, internal, X)," &
"301 (BC_4, *, internal, 1)," &
"302 (BC_4, *, internal, X)," &
--BSC group 101 for unused pad
"303 (BC_4, *, internal, X)," &
"304 (BC_4, *, internal, 1)," &
"305 (BC_4, *, internal, X)," &
--BSC group 102 for I/O pin 78
"306 (BC_4, IO78, input, X)," &
"307 (BC_1, *, control, 1)," &
"308 (BC_1, IO78, output3, X, 307, 1, Z)," &
--BSC group 103 for I/O pin 77
"309 (BC_4, IO77, input, X)," &
"310 (BC_1, *, control, 1)," &
"311 (BC_1, IO77, output3, X, 310, 1, Z)," &
--BSC group 104 for I/O pin 76
"312 (BC_4, IO76, input, X)," &
"313 (BC_1, *, control, 1)," &
"314 (BC_1, IO76, output3, X, 313, 1, Z)," &
--BSC group 105 for unused pad
"315 (BC_4, *, internal, X)," &
"316 (BC_4, *, internal, 1)," &
"317 (BC_4, *, internal, X)," &
--BSC group 106 for unused pad
"318 (BC_4, *, internal, X)," &
"319 (BC_4, *, internal, 1)," &
"320 (BC_4, *, internal, X)," &
--BSC group 107 for I/O pin 75
"321 (BC_4, IO75, input, X)," &
"322 (BC_1, *, control, 1)," &
"323 (BC_1, IO75, output3, X, 322, 1, Z)," &
--BSC group 108 for unused pad
"324 (BC_4, *, internal, X)," &
"325 (BC_4, *, internal, 1)," &
"326 (BC_4, *, internal, X)," &
--BSC group 109 for I/O pin 74
"327 (BC_4, IO74, input, X)," &
"328 (BC_1, *, control, 1)," &
"329 (BC_1, IO74, output3, X, 328, 1, Z)," &
--BSC group 110 for unused pad
"330 (BC_4, *, internal, X)," &
"331 (BC_4, *, internal, 1)," &
"332 (BC_4, *, internal, X)," &
--BSC group 111 for I/O pin 73
"333 (BC_4, IO73, input, X)," &
"334 (BC_1, *, control, 1)," &
"335 (BC_1, IO73, output3, X, 334, 1, Z)," &
--BSC group 112 for unused pad
"336 (BC_4, *, internal, X)," &
"337 (BC_4, *, internal, 1)," &
"338 (BC_4, *, internal, X)," &
--BSC group 113 for I/O pin 72
"339 (BC_4, IO72, input, X)," &
"340 (BC_1, *, control, 1)," &
"341 (BC_1, IO72, output3, X, 340, 1, Z)," &
--BSC group 114 for I/O pin 71
"342 (BC_4, IO71, input, X)," &
"343 (BC_1, *, control, 1)," &
"344 (BC_1, IO71, output3, X, 343, 1, Z)," &
--BSC group 115 for unused pad
"345 (BC_4, *, internal, X)," &
"346 (BC_4, *, internal, 1)," &
"347 (BC_4, *, internal, X)," &
--BSC group 116 for unused pad
"348 (BC_4, *, internal, X)," &
"349 (BC_4, *, internal, 1)," &
"350 (BC_4, *, internal, X)," &
--BSC group 117 for I/O pin 70
"351 (BC_4, IO70, input, X)," &
"352 (BC_1, *, control, 1)," &
"353 (BC_1, IO70, output3, X, 352, 1, Z)," &
--BSC group 118 for I/O pin 69
"354 (BC_4, IO69, input, X)," &
"355 (BC_1, *, control, 1)," &
"356 (BC_1, IO69, output3, X, 355, 1, Z)," &
--BSC group 119 for unused pad
"357 (BC_4, *, internal, X)," &
"358 (BC_4, *, internal, 1)," &
"359 (BC_4, *, internal, X)," &
--BSC group 120 for unused pad
"360 (BC_4, *, internal, X)," &
"361 (BC_4, *, internal, 1)," &
"362 (BC_4, *, internal, X)," &
--BSC group 121 for unused pad
"363 (BC_4, *, internal, X)," &
"364 (BC_4, *, internal, 1)," &
"365 (BC_4, *, internal, X)," &
--BSC group 122 for unused pad
"366 (BC_4, *, internal, X)," &
"367 (BC_4, *, internal, 1)," &
"368 (BC_4, *, internal, X)," &
--BSC group 123 for unused pad
"369 (BC_4, *, internal, X)," &
"370 (BC_4, *, internal, 1)," &
"371 (BC_4, *, internal, X)," &
--BSC group 124 for I/O pin 68
"372 (BC_4, IO68, input, X)," &
"373 (BC_1, *, control, 1)," &
"374 (BC_1, IO68, output3, X, 373, 1, Z)," &
--BSC group 125 for I/O pin 67
"375 (BC_4, IO67, input, X)," &
"376 (BC_1, *, control, 1)," &
"377 (BC_1, IO67, output3, X, 376, 1, Z)," &
--BSC group 126 for I/O pin 66
"378 (BC_4, IO66, input, X)," &
"379 (BC_1, *, control, 1)," &
"380 (BC_1, IO66, output3, X, 379, 1, Z)," &
--BSC group 127 for I/O pin 64
"381 (BC_4, IO64, input, X)," &
"382 (BC_1, *, control, 1)," &
"383 (BC_1, IO64, output3, X, 382, 1, Z)," &
--BSC group 128 for I/O pin 62
"384 (BC_4, IO62, input, X)," &
"385 (BC_1, *, control, 1)," &
"386 (BC_1, IO62, output3, X, 385, 1, Z)," &
--BSC group 129 for unused pad
"387 (BC_4, *, internal, X)," &
"388 (BC_4, *, internal, 1)," &
"389 (BC_4, *, internal, X)," &
--BSC group 130 for unused pad
"390 (BC_4, *, internal, X)," &
"391 (BC_4, *, internal, 1)," &
"392 (BC_4, *, internal, X)," &
--BSC group 131 for I/O pin 61
"393 (BC_4, IO61, input, X)," &
"394 (BC_1, *, control, 1)," &
"395 (BC_1, IO61, output3, X, 394, 1, Z)," &
--BSC group 132 for unused pad
"396 (BC_4, *, internal, X)," &
"397 (BC_4, *, internal, 1)," &
"398 (BC_4, *, internal, X)," &
--BSC group 133 for unused pad
"399 (BC_4, *, internal, X)," &
"400 (BC_4, *, internal, 1)," &
"401 (BC_4, *, internal, X)," &
--BSC group 134 for unused pad
"402 (BC_4, *, internal, X)," &
"403 (BC_4, *, internal, 1)," &
"404 (BC_4, *, internal, X)," &
--BSC group 135 for unused pad
"405 (BC_4, *, internal, X)," &
"406 (BC_4, *, internal, 1)," &
"407 (BC_4, *, internal, X)," &
--BSC group 136 for I/O pin 58
"408 (BC_4, IO58, input, X)," &
"409 (BC_1, *, control, 1)," &
"410 (BC_1, IO58, output3, X, 409, 1, Z)," &
--BSC group 137 for I/O pin 57
"411 (BC_4, IO57, input, X)," &
"412 (BC_1, *, control, 1)," &
"413 (BC_1, IO57, output3, X, 412, 1, Z)," &
--BSC group 138 for I/O pin 56
"414 (BC_4, IO56, input, X)," &
"415 (BC_1, *, control, 1)," &
"416 (BC_1, IO56, output3, X, 415, 1, Z)," &
--BSC group 139 for unused pad
"417 (BC_4, *, internal, X)," &
"418 (BC_4, *, internal, 1)," &
"419 (BC_4, *, internal, X)," &
--BSC group 140 for I/O pin 55
"420 (BC_4, IO55, input, X)," &
"421 (BC_1, *, control, 1)," &
"422 (BC_1, IO55, output3, X, 421, 1, Z)," &
--BSC group 141 for unused pad
"423 (BC_4, *, internal, X)," &
"424 (BC_4, *, internal, 1)," &
"425 (BC_4, *, internal, X)," &
--BSC group 142 for unused pad
"426 (BC_4, *, internal, X)," &
"427 (BC_4, *, internal, 1)," &
"428 (BC_4, *, internal, X)," &
--BSC group 143 for I/O pin 54
"429 (BC_4, IO54, input, X)," &
"430 (BC_1, *, control, 1)," &
"431 (BC_1, IO54, output3, X, 430, 1, Z)," &
--BSC group 144 for unused pad
"432 (BC_4, *, internal, X)," &
"433 (BC_4, *, internal, 1)," &
"434 (BC_4, *, internal, X)," &
--BSC group 145 for I/O pin 53
"435 (BC_4, IO53, input, X)," &
"436 (BC_1, *, control, 1)," &
"437 (BC_1, IO53, output3, X, 436, 1, Z)," &
--BSC group 146 for I/O pin 52
"438 (BC_4, IO52, input, X)," &
"439 (BC_1, *, control, 1)," &
"440 (BC_1, IO52, output3, X, 439, 1, Z)," &
--BSC group 147 for unused pad
"441 (BC_4, *, internal, X)," &
"442 (BC_4, *, internal, 1)," &
"443 (BC_4, *, internal, X)," &
--BSC group 148 for unused pad
"444 (BC_4, *, internal, X)," &
"445 (BC_4, *, internal, 1)," &
"446 (BC_4, *, internal, X)," &
--BSC group 149 for unused pad
"447 (BC_4, *, internal, X)," &
"448 (BC_4, *, internal, 1)," &
"449 (BC_4, *, internal, X)," &
--BSC group 150 for I/O pin 51
"450 (BC_4, IO51, input, X)," &
"451 (BC_1, *, control, 1)," &
"452 (BC_1, IO51, output3, X, 451, 1, Z)," &
--BSC group 151 for unused pad
"453 (BC_4, *, internal, X)," &
"454 (BC_4, *, internal, 1)," &
"455 (BC_4, *, internal, X)," &
--BSC group 152 for unused pad
"456 (BC_4, *, internal, X)," &
"457 (BC_4, *, internal, 1)," &
"458 (BC_4, *, internal, X)," &
--BSC group 153 for unused pad
"459 (BC_4, *, internal, X)," &
"460 (BC_4, *, internal, 1)," &
"461 (BC_4, *, internal, X)," &
--BSC group 154 for I/O pin 50
"462 (BC_4, IO50, input, X)," &
"463 (BC_1, *, control, 1)," &
"464 (BC_1, IO50, output3, X, 463, 1, Z)," &
--BSC group 155 for unused pad
"465 (BC_4, *, internal, X)," &
"466 (BC_4, *, internal, 1)," &
"467 (BC_4, *, internal, X)," &
--BSC group 156 for I/O pin 49
"468 (BC_4, IO49, input, X)," &
"469 (BC_1, *, control, 1)," &
"470 (BC_1, IO49, output3, X, 469, 1, Z)," &
--BSC group 157 for I/O pin 48
"471 (BC_4, IO48, input, X)," &
"472 (BC_1, *, control, 1)," &
"473 (BC_1, IO48, output3, X, 472, 1, Z)," &
--BSC group 158 for I/O pin 47
"474 (BC_4, IO47, input, X)," &
"475 (BC_1, *, control, 1)," &
"476 (BC_1, IO47, output3, X, 475, 1, Z)," &
--BSC group 159 for unused pad
"477 (BC_4, *, internal, X)," &
"478 (BC_4, *, internal, 1)," &
"479 (BC_4, *, internal, X)" ;
-- ************************************************************************
-- * IEEE 1532 EXTENSION INFORMATION *
-- ************************************************************************
attribute ISC_PIN_BEHAVIOR of EPM570T100 : entity is "HIGHZ";
attribute ISC_STATUS of EPM570T100 : entity is "Not Implemented";
attribute ISC_BLANK_USERCODE of EPM570T100 : entity is
"11111111111111111111111111111111";
attribute ISC_FLOW of EPM570T100 : entity is
"FLOW_PROGRAM_DONEBIT " &
"INITIALIZE " &
"(ISC_ADDRESS_SHIFT 14:0000 WAIT TCK 53)" &
"(ISC_PROGRAM 16:7BFF WAIT 1.0e-4)," &
"FLOW_DISABLE " &
"INITIALIZE " &
"(ISC_DISABLE WAIT 1.0e-3)" &
"(BYPASS WAIT 1.0e-3)," &
"FLOW_VERIFY_IDCODE " &
"INITIALIZE " &
"(IDCODE 32:0 WAIT TCK 53 32:020A20DD)," &
"FLOW_VERIFY_IDCODE (silicon) " &
"INITIALIZE" &
"(ISC_ADDRESS_SHIFT 14:0111 WAIT TCK 53)" &
"(ISC_READ WAIT TCK 53 16:8232*FFFF)" &
"(ISC_READ WAIT TCK 53 16:2AA2*FFFF)" &
"(ISC_READ WAIT TCK 53 16:4A82*FFFF)" &
"(ISC_READ WAIT TCK 53 16:0C2C*FFFF)" &
"(ISC_READ WAIT TCK 53 16:0000*FFFF)," &
"FLOW_ENABLE " &
"INITIALIZE " &
"(ISC_ENABLE WAIT 1.0e-3)," &
"FLOW_ERASE " &
"INITIALIZE " &
"(ISC_ADDRESS_SHIFT 14:0000 WAIT TCK 53)" &
"(ISC_ERASE WAIT 500.0e-3)" &
"(ISC_ADDRESS_SHIFT 14:0001 WAIT TCK 53)" &
"(ISC_ERASE WAIT 500.0e-3)" &
"(ISC_ADDRESS_SHIFT 14:0021 WAIT TCK 53)" &
"(ISC_ERASE WAIT 500.0e-3)," &
"FLOW_BLANK_CHECK " &
"INITIALIZE" &
"(ISC_ADDRESS_SHIFT 14:0000 WAIT TCK 53)" &
"(ISC_READ WAIT TCK 53 16:FFFF*FFFF)" &
"REPEAT 3327 " &
"(ISC_READ WAIT TCK 53 16:FFFF*FFFF)" &
"(ISC_ADDRESS_SHIFT 14:0001 WAIT TCK 53)" &
"(ISC_READ WAIT TCK 53 16:FFFF*FFFF)" &
"REPEAT 511 " &
"(ISC_READ WAIT TCK 53 16:FFFF*FFFF)," &
"FLOW_VERIFY1 (array) " &
"INITIALIZE" &
"(ISC_ADDRESS_SHIFT 14:0000 WAIT TCK 53)" &
"(ISC_READ WAIT TCK 53 16:?*FFFF)" &
"(ISC_READ WAIT TCK 53 16:?*FFFF)" &
"(ISC_READ WAIT TCK 53 16:?*FFFF)" &
"(ISC_READ WAIT TCK 53 16:?*FFFF)" &
"REPEAT 8700 " &
"(ISC_READ WAIT TCK 53 16:?*FFFF)," &
"FLOW_VERIFY2 (array) " &
"INITIALIZE" &
"(ISC_ADDRESS_SHIFT 14:0000 WAIT TCK 53)" &
"(ISC_READ WAIT TCK 53 16:?*FBFF)" &
"(ISC_READ WAIT TCK 53 16:?*FFFF)" &
"(ISC_READ WAIT TCK 53 16:?*FFFF)" &
"(ISC_READ WAIT TCK 53 16:?*FFFF)" &
"REPEAT 8700 " &
"(ISC_READ WAIT TCK 53 16:?*FFFF)," &
"FLOW_PROGRAM (array) " &
"INITIALIZE " &
"(ISC_ADDRESS_SHIFT 14:0000 WAIT TCK 53)" &
"(ISC_PROGRAM 16:? WAIT 1.0e-4 )" &
"(ISC_PROGRAM 16:? WAIT 1.0e-4 )" &
"(ISC_PROGRAM 16:? WAIT 1.0e-4 )" &
"(ISC_PROGRAM 16:? WAIT 1.0e-4 )" &
"REPEAT 8700 " &
"(ISC_PROGRAM 16:? WAIT 1.0e-4 )";
attribute ISC_PROCEDURE of EPM570T100 : entity is
"PROC_ENABLE = (FLOW_ENABLE)," &
"PROC_DISABLE = (FLOW_DISABLE)," &
"PROC_PROGRAM(array) = (FLOW_PROGRAM(array))," &
"PROC_ERASE = (FLOW_ERASE)," &
"PROC_VERIFY1(array) = (FLOW_VERIFY1(array))," &
"PROC_VERIFY2(array) = (FLOW_VERIFY2(array))," &
"PROC_PROGRAM_DONE = (FLOW_PROGRAM_DONEBIT)," &
"PROC_BLANK_CHECK = (FLOW_BLANK_CHECK)," &
"PROC_ERROR_EXIT = (FLOW_DISABLE)," &
"PROC_VERIFY_IDCODE(silicon) = (FLOW_VERIFY_IDCODE(silicon))," &
"TEST_VERIFY_IDCODE = (FLOW_VERIFY_IDCODE)";
attribute ISC_ACTION of EPM570T100 : entity is
"VERIFY_IDCODE = (TEST_VERIFY_IDCODE)," &
"VERIFY_SIID = (TEST_VERIFY_IDCODE RECOMMENDED," &
"PROC_ENABLE," &
"PROC_VERIFY_IDCODE(silicon)," &
"PROC_DISABLE)," &
"PROGRAM = (TEST_VERIFY_IDCODE RECOMMENDED," &
"PROC_ENABLE," &
"PROC_VERIFY_IDCODE(silicon)," &
"PROC_ERASE," &
"PROC_BLANK_CHECK," &
"PROC_PROGRAM(array)," &
"PROC_VERIFY1(array)," &
"PROC_PROGRAM_DONE," &
"PROC_DISABLE)," &
"VERIFY = (TEST_VERIFY_IDCODE RECOMMENDED," &
"PROC_ENABLE," &
"PROC_VERIFY_IDCODE(silicon)," &
"PROC_VERIFY2(array)," &
"PROC_DISABLE)," &
"ERASE = (TEST_VERIFY_IDCODE RECOMMENDED," &
"PROC_ENABLE," &
"PROC_VERIFY_IDCODE(silicon)," &
"PROC_ERASE," &
"PROC_BLANK_CHECK," &
"PROC_DISABLE)," &
"BLANK_CHECK = (TEST_VERIFY_IDCODE RECOMMENDED," &
"PROC_ENABLE," &
"PROC_VERIFY_IDCODE(silicon)," &
"PROC_BLANK_CHECK," &
"PROC_DISABLE)," &
"PROGRAM_DONE = (PROC_ENABLE," &
"PROC_VERIFY_IDCODE(silicon)," &
"PROC_PROGRAM_DONE," &
"PROC_DISABLE)";
-- *********************************************************************
-- * DESIGN WARNING *
-- *********************************************************************
attribute DESIGN_WARNING of EPM570T100 : entity is
"This EPM570T100 BSDL file supports 1149.1 testing before device"&
"configuration. Boundary scan testing after configuration"&
"requires changes to this file.Please read the comments"&
"at the top of the file for further instruction.";
end EPM570T100;
-- *********************************************************************
-- * REVISION HISTORY *
-- *********************************************************************
-- Revision Date Description
-- 1.3 06/26/2007 Update important notice,design warning
-- & include revision history.
