-- Advanced Micro Devices MACH231 100 Pin TQFP BSDL description
--
-- Written By: Martha Chan
-- Date : October 16, 1995
-- Version : 1.0
-- 10/08/1998: (Jan Buxton) Moved some instructions from private to public.
-- 03/31/2000 (jkb): updated Copyright comments.
-- ****************************************************************
-- * Copyright 1999, 2000 Lattice/Vantis Corporation *
-- * 995 Stewart Dr. Sunnyvale, Ca 94088 *
-- * All rights reserved. No part of this program or publication*
-- * may be reproduced, transmitted, transcribed, stored in a *
-- * retrieval system, or translated into any language or *
-- * computer language, in any form or by any means without this *
-- * notice appearing within. *
-- ****************************************************************
-- * Lattice/Vantis makes no warranty for the use of this *
-- * product and assumes no responsibility for any errors which *
-- * may appear within. Neither does it make a commitment to *
-- * update this information. *
-- ****************************************************************
-- * This is the template BSDL file to be used for the purpose *
-- * of verifying the part's compliance with the IEEE standard *
-- * 1149.1-1990. *
-- ****************************************************************
--
-- This file has been verified by:
-- Teradyne VICTORY v 2.20
-- - Syntax Check using BSA
-- - Test vector generation using BSA
--
-- This file has NOT been verified by:
-- Hewlett-Packard Boundary-Scan Software
-- - Syntax Check
--
-- Genrad Boundary-Scan Software
-- - Syntax Check
-- - Physical Verification
--
-- ****************************************************************
-- Entity format: Mabcdddeeefggg
-- a = family (1, 2, 4, 5)
-- b = A for "A" type parts
-- c = Vcc level: 5, 3, 2, or 1 for 5.0, 3.3, 2.5, or 1.8 VDC
-- ddd = number of macrocells, such as 064
-- eee = number of I/O pins, such as 032
-- f = package: L, P, T, or B for PLCC, PQFP, TQFP, or BGA
-- ggg = number of pins, such as 044
entity M2_5128064T100 is
generic(PHYSICAL_PIN_MAP : string := "TQFP_100pin");
port (
DED_IN : in bit_vector(0 to 5); -- Clocks/Inputs
IO : inout bit_vector(0 to 63); -- I/O pins
TCK, TMS, TDI: in bit; -- JTAG inputs
TDO : out bit; -- JTAG outputs
NC : linkage bit_vector(0 to 4);
VCC : linkage bit_vector(0 to 5);
GND : linkage bit_vector(0 to 14)
);
use STD_1149_1_1990.all; -- get JTAG definitions and attributes
attribute PIN_MAP of M2_5128064T100 : entity is PHYSICAL_PIN_MAP;
constant TQFP_100pin : PIN_MAP_STRING :=
"DED_IN:(2,11,15,52,61,64), " & -- Dedicated Clock/Input Pins
"IO:( 90, 91, 92, 93, 94, 95, 96, 97, " & -- I/O A
" 3, 4, 5, 6, 7, 8, 9, 10, " & -- I/O B
" 16, 17, 18, 19, 20, 21, 22, 23, " & -- I/O C
" 28, 29, 30, 31, 32, 33, 34, 35, " & -- I/O D
" 41, 42, 43, 44, 45, 46, 47, 48, " & -- I/O E
" 53, 54, 55, 56, 57, 58, 59, 60, " & -- I/O F
" 65, 66, 67, 68, 69, 70, 71, 72, " & -- I/O G
" 77, 78, 79, 80, 81, 82, 83, 84)," & -- I/O H
" TDI:1, TMS:51, TCK:25, TDO:74, " & -- JTAG
"NC :(24,36,73,85,98), " & -- No Connect
"VCC:(12,37,40,62,86,89), " & -- POWER
"GND:(13,14,26,27,38,39,49, " &
"50,63,75,76,87,88,99,100)"; -- GROUND PINS
-- END OF PIN DEFINITION
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (20.0e6, BOTH);
-- Instruction register definitions
attribute INSTRUCTION_LENGTH of M2_5128064T100 : entity is 6;
attribute INSTRUCTION_OPCODE of M2_5128064T100 : entity is
"BYPASS (111111)," &
"EXTEST (000000)," &
"SAMPLE (000010)," &
"IDCODE (000001)," &
"PRIV003 (000011)," &
"PRIV004 (000100)," &
"PRIV005 (000101)," &
"PRIV006 (000110)," &
"PRIV007 (000111)," &
"PRIV008 (001000)," &
"PRIV00F (001111)," &
"PRIVATE (001110,001101,110000,100101,100110," &
"100111,101110,110011,110010)";
attribute INSTRUCTION_CAPTURE of M2_5128064T100 : entity is "000001";
attribute INSTRUCTION_PRIVATE of M2_5128064T100 : entity is "PRIVATE";
attribute IDCODE_REGISTER of M2_5128064T100 : entity is
"0000" & -- version number
"0111000011111000" & -- part identification
"00000000001" & -- company code
"1"; -- mandatory 1
attribute REGISTER_ACCESS of M2_5128064T100 : entity is
"BYPASS (BYPASS, PRIV005, PRIV006, PRIV008)," &
"BOUNDARY (EXTEST,SAMPLE)," &
"ROWREG[74](PRIV003)," &
"COLREG[560](PRIV004, PRIV007)," &
"PRIVR00F[5](PRIV00F)";
-- **************************************************************
-- * BOUNDARY SCAN CELL REGISTER DESCRIPTION *
-- * MACH2xx-ISP parts do not have boundary scan cells. *
-- **************************************************************
attribute BOUNDARY_CELLS of M2_5128064T100 : entity is "BC_3";
attribute BOUNDARY_LENGTH of M2_5128064T100 : entity is 1;
attribute BOUNDARY_REGISTER of M2_5128064T100: entity is
"0 (BC_3, *, INTERNAL, X)";
end M2_5128064T100;